What is wrong with my node?
Why is this happening? See below..... The internet is working just fine from the site. I logged into the node and the router remotely at the moment. The node repeater is in the DMZ. I can ping google.com so the DNS is working. This node not being able to re-connect or connect is really not cool! What is going on here? Thanks! Jim W7RY 2560 on IAX2/208.70.77.197:4569-13708 [Sep 4 19:57:01] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:05] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13708' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-14388 [Sep 4 19:57:13] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:17] NOTICE[2293]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-14388' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-15647 [Sep 4 19:57:25] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:29] NOTICE[2286]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-15647' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-6971 [Sep 4 19:57:37] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:41] NOTICE[2287]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-6971' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-13440 [Sep 4 19:57:49] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:53] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13440' w7ry*CLI> exit
This is usually an ISP issue. Happens to me all the time with my crummy cable ISP. Usually have to restart the cable modem and router to get it playing nice again. DMZ or not, your router or the remote router could be blocking traffic. I've seen it a 100 times here though your issue could be different, my two cents. 73 de K0JSC ________________________________ From: Jim W7RY [mailto:w7ry@centurytel.net] Sent: Tuesday, September 04, 2012 9:01 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] What is wrong with my node? Why is this happening? See below..... The internet is working just fine from the site. I logged into the node and the router remotely at the moment. The node repeater is in the DMZ. I can ping google.com so the DNS is working. This node not being able to re-connect or connect is really not cool! What is going on here? Thanks! Jim W7RY 2560 on IAX2/208.70.77.197:4569-13708 [Sep 4 19:57:01] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:05] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13708' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-14388 [Sep 4 19:57:13] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:17] NOTICE[2293]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-14388' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-15647 [Sep 4 19:57:25] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:29] NOTICE[2286]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-15647' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-6971 [Sep 4 19:57:37] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:41] NOTICE[2287]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-6971' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-13440 [Sep 4 19:57:49] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:53] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13440' w7ry*CLI> exit
The node is at a wireless internet provider hub. I have 1.5 Mb of speed at all times. This has started to happen after I installed the keep connected commands. The node has always had this issue though. 73 Jim W7RY From: Jeffrey S. Carrier Sent: Tuesday, September 04, 2012 8:20 PM To: Jim W7RY ; app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] What is wrong with my node? This is usually an ISP issue. Happens to me all the time with my crummy cable ISP. Usually have to restart the cable modem and router to get it playing nice again. DMZ or not, your router or the remote router could be blocking traffic. I’ve seen it a 100 times here though your issue could be different, my two cents. 73 de K0JSC -------------------------------------------------------------------------------- From: Jim W7RY [mailto:w7ry@centurytel.net] Sent: Tuesday, September 04, 2012 9:01 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] What is wrong with my node? Why is this happening? See below..... The internet is working just fine from the site. I logged into the node and the router remotely at the moment. The node repeater is in the DMZ. I can ping google.com so the DNS is working. This node not being able to re-connect or connect is really not cool! What is going on here? Thanks! Jim W7RY 2560 on IAX2/208.70.77.197:4569-13708 [Sep 4 19:57:01] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:05] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13708' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-14388 [Sep 4 19:57:13] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:17] NOTICE[2293]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-14388' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-15647 [Sep 4 19:57:25] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:29] NOTICE[2286]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-15647' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-6971 [Sep 4 19:57:37] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:41] NOTICE[2287]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-6971' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-13440 [Sep 4 19:57:49] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:53] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13440' w7ry*CLI> exit
Is the ISP service STATIC or DYNAMIC IP assignment? In cases other than AllStar, I have seen situations where the IP address changes (due to dynamic/dhcp re-assignment) and the site LAN device(s) continue to ARP CACHE the old IP-to-MAC address pair. While AllStar uses periodic IAX registrations to keep the ALlStar 'network' aligned, these re-registrations would have zero affect on local ARP CACHE entries (and their timeout), if ARP CACHE is your issue. You need the commands to display the ARP table on EACH and ALL of the devices on your LAN path between the node and the internet, as well as on the Linux node host itself. Linux command, # arp -v As a shot in the dark, you may want to confirm that your wireless router's firmware is the most up to date there is. Cycling the interface can clear the ARP Entries. you can DOWN the interface, pause, and UP the interface. Don't DOWN a REMOTE interface you're doing the remote connection through. You need a small script to down, sleep, and up that'll run in the background (&) so when you get disconnected, you can re-connect when the script UPs the interface. Again, I don't know if this is your issue, but I have seen ARP tables MIS-matches cause these types of issues. Good luck. ————— On 2012-09-05, at 0:21, Jim W7RY <w7ry@centurytel.net> wrote: The node is at a wireless internet provider hub. I have 1.5 Mb of speed at all times. This has started to happen after I installed the keep connected commands. The node has always had this issue though. 73 Jim W7RY *From:* Jeffrey S. Carrier <jeff.carrier@rmsmsecurity.com> *Sent:* Tuesday, September 04, 2012 8:20 PM *To:* Jim W7RY <w7ry@centurytel.net> ; app_rpt-users@ohnosec.org *Subject:* RE: [App_rpt-users] What is wrong with my node? This is usually an ISP issue. Happens to me all the time with my crummy cable ISP. Usually have to restart the cable modem and router to get it playing nice again. DMZ or not, your router or the remote router could be blocking traffic. I’ve seen it a 100 times here though your issue could be different, my two cents. 73 de K0JSC ------------------------------ *From:* Jim W7RY [mailto:w7ry@centurytel.net] *Sent:* Tuesday, September 04, 2012 9:01 PM *To:* app_rpt-users@ohnosec.org *Subject:* [App_rpt-users] What is wrong with my node? Why is this happening? See below..... The internet is working just fine from the site. I logged into the node and the router remotely at the moment. The node repeater is in the DMZ. I can ping google.com so the DNS is working. This node not being able to re-connect or connect is really not cool! What is going on here? Thanks! Jim W7RY 2560 on IAX2/208.70.77.197:4569-13708 [Sep 4 19:57:01] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:05] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13708' -- rpt (attempt_reconnect) initiating call to IAX2/ radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-14388 [Sep 4 19:57:13] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:17] NOTICE[2293]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-14388' -- rpt (attempt_reconnect) initiating call to IAX2/ radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-15647 [Sep 4 19:57:25] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:29] NOTICE[2286]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-15647' -- rpt (attempt_reconnect) initiating call to IAX2/ radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-6971 [Sep 4 19:57:37] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:41] NOTICE[2287]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-6971' -- rpt (attempt_reconnect) initiating call to IAX2/ radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-13440 [Sep 4 19:57:49] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:53] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13440' w7ry*CLI> exit _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I have a static IP. Only one device on the LAN. The WAN connector on the router goes to the IP’s switch, the LAN connector goes to the node. 73 Jim W7RY From: S. Scott Sent: Wednesday, September 05, 2012 6:59 AM To: Jim W7RY Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] What is wrong with my node? Is the ISP service STATIC or DYNAMIC IP assignment? In cases other than AllStar, I have seen situations where the IP address changes (due to dynamic/dhcp re-assignment) and the site LAN device(s) continue to ARP CACHE the old IP-to-MAC address pair. While AllStar uses periodic IAX registrations to keep the ALlStar 'network' aligned, these re-registrations would have zero affect on local ARP CACHE entries (and their timeout), if ARP CACHE is your issue. You need the commands to display the ARP table on EACH and ALL of the devices on your LAN path between the node and the internet, as well as on the Linux node host itself. Linux command, # arp -v As a shot in the dark, you may want to confirm that your wireless router's firmware is the most up to date there is. Cycling the interface can clear the ARP Entries. you can DOWN the interface, pause, and UP the interface. Don't DOWN a REMOTE interface you're doing the remote connection through. You need a small script to down, sleep, and up that'll run in the background (&) so when you get disconnected, you can re-connect when the script UPs the interface. Again, I don't know if this is your issue, but I have seen ARP tables MIS-matches cause these types of issues. Good luck. ————— On 2012-09-05, at 0:21, Jim W7RY <w7ry@centurytel.net> wrote: The node is at a wireless internet provider hub. I have 1.5 Mb of speed at all times. This has started to happen after I installed the keep connected commands. The node has always had this issue though. 73 Jim W7RY From: Jeffrey S. Carrier Sent: Tuesday, September 04, 2012 8:20 PM To: Jim W7RY ; app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] What is wrong with my node? This is usually an ISP issue. Happens to me all the time with my crummy cable ISP. Usually have to restart the cable modem and router to get it playing nice again. DMZ or not, your router or the remote router could be blocking traffic. I’ve seen it a 100 times here though your issue could be different, my two cents. 73 de K0JSC ------------------------------------------------------------------------------ From: Jim W7RY [mailto:w7ry@centurytel.net] Sent: Tuesday, September 04, 2012 9:01 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] What is wrong with my node? Why is this happening? See below..... The internet is working just fine from the site. I logged into the node and the router remotely at the moment. The node repeater is in the DMZ. I can ping google.com so the DNS is working. This node not being able to re-connect or connect is really not cool! What is going on here? Thanks! Jim W7RY 2560 on IAX2/208.70.77.197:4569-13708 [Sep 4 19:57:01] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:05] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13708' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-14388 [Sep 4 19:57:13] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:17] NOTICE[2293]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-14388' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-15647 [Sep 4 19:57:25] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:29] NOTICE[2286]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-15647' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-6971 [Sep 4 19:57:37] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:41] NOTICE[2287]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-6971' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-13440 [Sep 4 19:57:49] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:53] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13440' w7ry*CLI> exit _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
You wrote, "I have a STATIC IP" and then in another reply wrote, "but it changes wildly.". The two statements are incongruous. How does your network detect and then apply the new address to applicable interface when "...it wildly changes." ————— iThing: Big thumbs & little keys. Please excuse typo, spelling and grammar errors • Good planets are hard to find – think before you print • My desire to be well-informed is currently at odds with my desire to remain sane. • Last night I played a blank CD at full blast. The Mime next door went nuts. On 2012-09-05, at 10:18, Jim W7RY <w7ry@centurytel.net> wrote: I have a static IP. Only one device on the LAN. The WAN connector on the router goes to the IP’s switch, the LAN connector goes to the node. 73 Jim W7RY *From:* S. Scott <8f27e956@gmail.com> *Sent:* Wednesday, September 05, 2012 6:59 AM *To:* Jim W7RY <w7ry@centurytel.net> *Cc:* app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] What is wrong with my node? Is the ISP service STATIC or DYNAMIC IP assignment? In cases other than AllStar, I have seen situations where the IP address changes (due to dynamic/dhcp re-assignment) and the site LAN device(s) continue to ARP CACHE the old IP-to-MAC address pair. While AllStar uses periodic IAX registrations to keep the ALlStar 'network' aligned, these re-registrations would have zero affect on local ARP CACHE entries (and their timeout), if ARP CACHE is your issue. You need the commands to display the ARP table on EACH and ALL of the devices on your LAN path between the node and the internet, as well as on the Linux node host itself. Linux command, # arp -v As a shot in the dark, you may want to confirm that your wireless router's firmware is the most up to date there is. Cycling the interface can clear the ARP Entries. you can DOWN the interface, pause, and UP the interface. Don't DOWN a REMOTE interface you're doing the remote connection through. You need a small script to down, sleep, and up that'll run in the background (&) so when you get disconnected, you can re-connect when the script UPs the interface. Again, I don't know if this is your issue, but I have seen ARP tables MIS-matches cause these types of issues. Good luck. ————— On 2012-09-05, at 0:21, Jim W7RY <w7ry@centurytel.net> wrote: The node is at a wireless internet provider hub. I have 1.5 Mb of speed at all times. This has started to happen after I installed the keep connected commands. The node has always had this issue though. 73 Jim W7RY *From:* Jeffrey S. Carrier <jeff.carrier@rmsmsecurity.com> *Sent:* Tuesday, September 04, 2012 8:20 PM *To:* Jim W7RY <w7ry@centurytel.net> ; app_rpt-users@ohnosec.org *Subject:* RE: [App_rpt-users] What is wrong with my node? This is usually an ISP issue. Happens to me all the time with my crummy cable ISP. Usually have to restart the cable modem and router to get it playing nice again. DMZ or not, your router or the remote router could be blocking traffic. I’ve seen it a 100 times here though your issue could be different, my two cents. 73 de K0JSC ------------------------------ *From:* Jim W7RY [mailto:w7ry@centurytel.net] *Sent:* Tuesday, September 04, 2012 9:01 PM *To:* app_rpt-users@ohnosec.org *Subject:* [App_rpt-users] What is wrong with my node? Why is this happening? See below..... The internet is working just fine from the site. I logged into the node and the router remotely at the moment. The node repeater is in the DMZ. I can ping google.com so the DNS is working. This node not being able to re-connect or connect is really not cool! What is going on here? Thanks! Jim W7RY 2560 on IAX2/208.70.77.197:4569-13708 [Sep 4 19:57:01] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:05] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13708' -- rpt (attempt_reconnect) initiating call to IAX2/ radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-14388 [Sep 4 19:57:13] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:17] NOTICE[2293]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-14388' -- rpt (attempt_reconnect) initiating call to IAX2/ radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-15647 [Sep 4 19:57:25] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:29] NOTICE[2286]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-15647' -- rpt (attempt_reconnect) initiating call to IAX2/ radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-6971 [Sep 4 19:57:37] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:41] NOTICE[2287]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-6971' -- rpt (attempt_reconnect) initiating call to IAX2/ radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-13440 [Sep 4 19:57:49] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:53] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13440' w7ry*CLI> exit _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I have seen this on a pair of nailed up "ulisted" nodes when the VPN channel between the two locations fails, and it does frequently, maybe once per day. DD-WRT boxes both ends for the vpn, cron to kill -HUP the pppd process and it restarts and all is fine for a while. Unfortunately asterisk does not seem to recover and it has to restart as well. But as long as I keep the VPN up asterisk is happy. So it seems that this notice is shown when a network issue is detected on an ongoing connection, or persistant, or whatever it is called. GeorgeC W2DB 2360 ----- Original Message ----- From: Jim W7RY To: app_rpt-users@ohnosec.org Sent: Tuesday, September 04, 2012 11:00 PM Subject: [App_rpt-users] What is wrong with my node? Why is this happening? See below..... The internet is working just fine from the site. I logged into the node and the router remotely at the moment. The node repeater is in the DMZ. I can ping google.com so the DNS is working. This node not being able to re-connect or connect is really not cool! What is going on here? Thanks! Jim W7RY 2560 on IAX2/208.70.77.197:4569-13708 [Sep 4 19:57:01] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:05] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13708' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-14388 [Sep 4 19:57:13] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:17] NOTICE[2293]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-14388' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-15647 [Sep 4 19:57:25] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:29] NOTICE[2286]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-15647' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-6971 [Sep 4 19:57:37] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:41] NOTICE[2287]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-6971' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-13440 [Sep 4 19:57:49] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:53] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13440' w7ry*CLI> exit
Mine isn't even a VPN but my ISP changes IP's wildly (to the 2nd octet) quite frequently. I'm not sure if this is related. I set up a script to call astres.sh from a DTMF command Which "sometimes" helps. I also added into the "nodes" stanza the dns name of the node I want to stay connected to, that could be worth a try. K0JSC ________________________________ From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of George Csahanin Sent: Wednesday, September 05, 2012 8:43 AM To: Jim W7RY; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] What is wrong with my node? I have seen this on a pair of nailed up "ulisted" nodes when the VPN channel between the two locations fails, and it does frequently, maybe once per day. DD-WRT boxes both ends for the vpn, cron to kill -HUP the pppd process and it restarts and all is fine for a while. Unfortunately asterisk does not seem to recover and it has to restart as well. But as long as I keep the VPN up asterisk is happy. So it seems that this notice is shown when a network issue is detected on an ongoing connection, or persistant, or whatever it is called. GeorgeC W2DB 2360 ----- Original Message ----- From: Jim W7RY <mailto:w7ry@centurytel.net> To: app_rpt-users@ohnosec.org Sent: Tuesday, September 04, 2012 11:00 PM Subject: [App_rpt-users] What is wrong with my node? Why is this happening? See below..... The internet is working just fine from the site. I logged into the node and the router remotely at the moment. The node repeater is in the DMZ. I can ping google.com so the DNS is working. This node not being able to re-connect or connect is really not cool! What is going on here? Thanks! Jim W7RY 2560 on IAX2/208.70.77.197:4569-13708 [Sep 4 19:57:01] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:05] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13708' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-14388 [Sep 4 19:57:13] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:17] NOTICE[2293]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-14388' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-15647 [Sep 4 19:57:25] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:29] NOTICE[2286]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-15647' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-6971 [Sep 4 19:57:37] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:41] NOTICE[2287]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-6971' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-13440 [Sep 4 19:57:49] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:53] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13440' w7ry*CLI> exit
Wow, that's lots of change. My ISP is ATT and I have static IP's, but then the DD-WRT box inside to create one large network between the house in Texas and the one in NJ. The NJ end is DHCP with Comcast, but it changes every few years if I power down too long or restart the modem with a different MAC address looking at it. astres.sh I am not familiar with, but I'm on a pretty old version, a bit over a year old. No sense changing things if it works. GC ----- Original Message ----- From: Jeffrey S. Carrier To: Jim W7RY ; app_rpt-users@ohnosec.org Sent: Wednesday, September 05, 2012 10:58 AM Subject: Re: [App_rpt-users] What is wrong with my node? Mine isn't even a VPN but my ISP changes IP's wildly (to the 2nd octet) quite frequently. I'm not sure if this is related. I set up a script to call astres.sh from a DTMF command Which "sometimes" helps. I also added into the "nodes" stanza the dns name of the node I want to stay connected to, that could be worth a try. K0JSC ------------------------------------------------------------------------------ From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of George Csahanin Sent: Wednesday, September 05, 2012 8:43 AM To: Jim W7RY; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] What is wrong with my node? I have seen this on a pair of nailed up "ulisted" nodes when the VPN channel between the two locations fails, and it does frequently, maybe once per day. DD-WRT boxes both ends for the vpn, cron to kill -HUP the pppd process and it restarts and all is fine for a while. Unfortunately asterisk does not seem to recover and it has to restart as well. But as long as I keep the VPN up asterisk is happy. So it seems that this notice is shown when a network issue is detected on an ongoing connection, or persistant, or whatever it is called. GeorgeC W2DB 2360 ----- Original Message ----- From: Jim W7RY To: app_rpt-users@ohnosec.org Sent: Tuesday, September 04, 2012 11:00 PM Subject: [App_rpt-users] What is wrong with my node? Why is this happening? See below..... The internet is working just fine from the site. I logged into the node and the router remotely at the moment. The node repeater is in the DMZ. I can ping google.com so the DNS is working. This node not being able to re-connect or connect is really not cool! What is going on here? Thanks! Jim W7RY 2560 on IAX2/208.70.77.197:4569-13708 [Sep 4 19:57:01] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:05] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13708' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-14388 [Sep 4 19:57:13] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process [Sep 4 19:57:17] NOTICE[2293]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-14388' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-15647 [Sep 4 19:57:25] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:29] NOTICE[2286]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-15647' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-6971 [Sep 4 19:57:37] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:41] NOTICE[2287]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-6971' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-13440 [Sep 4 19:57:49] WARNING[2315]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process [Sep 4 19:57:53] NOTICE[2295]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/208.70.77.197:4569-13440' w7ry*CLI> exit
participants (4)
-
George Csahanin -
Jeffrey S. Carrier -
Jim W7RY -
S. Scott