Mark, Channel B but it only puts out what is on channel A so why have both. You could feed a monitor off of the same line as the TX input on channel A as long as you didn't load it. It seems silly to run two channels with the same audio. Just more work for the processor. Anyhow to answer your question, no, there is not any known problem with audio out on channel A. We all use it and it works. If you have two different FOBs that are doing the same thing I would check the audio path out of the FOB to the TX. My guess is that there is a problem there. Make sure you have channel A set to voice in simpleusb.conf. That is where it defaults to so it should be right to begin with. 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Sat, 15 Nov 2014 11:09:04 -0500 From: mark@tinney.us To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 69, Issue 28 I have purchased a new URI from DMK and have the same problem, I plan to move it to channel B and see if it fails. I know enough about Linux to move around and execute files but wasn't sure if Asterisk was killing the channel and don't really know how to check. Sent from my Verizon Wireless 4G LTE smartphone -------- Original message -------- From: app_rpt-users-request@ohnosec.org Date: 11/15/2014 10:46 (GMT-05:00) To: app_rpt-users@ohnosec.org Subject: App_rpt-users Digest, Vol 69, Issue 28 Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org You can reach the person managing the list at app_rpt-users-owner@ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. Re: App_rpt-users Channel A audio lost (mark@tinney.us) 2. Re: App_rpt-users Channel A audio lost (Doug Crompton) ---------------------------------------------------------------------- Message: 1 Date: Sat, 15 Nov 2014 09:30:12 -0500 From: <mark@tinney.us> To: <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost Message-ID: <A158DC121ED446D0BF82334CCD795451@MkTinneyPC> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original I am not sure if this is how I get help but here is my question: I have a BBB running and everything works fine until I eventually start getting a carrier only on channel A audio output, I have audio on channel B when A is not working as I have channel B setup as a monitor in the repeater building. Do you have any suggestions for me to try to figure out this problem? Thanks, Mark W4GVX -----Original Message----- From: app_rpt-users-request@ohnosec.org Sent: Friday, November 14, 2014 12:00 PM To: app_rpt-users@ohnosec.org Subject: App_rpt-users Digest, Vol 69, Issue 26 Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org You can reach the person managing the list at app_rpt-users-owner@ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. Re: Echolink_and_app_rpt:_Looking_for_m ore_information_on_permit=*-* (ea8ee) 2. Re: Echolink_and_app_rpt:_Looking_for_m ore_information_on_permit=*-* (Stephen Curtis) ---------------------------------------------------------------------- Message: 1 Date: Fri, 14 Nov 2014 09:41:18 +0000 From: ea8ee <ea8ee1@gmail.com> To: Robert Newberry <N1XBM@amsat.org> Cc: app_rpt mailing list <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m ore_information_on_permit=*-* Message-ID: <CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" how active the vox mode in zoiper? maybe with a dmtf numbers? 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM@amsat.org>:

I think this has come up before, but if you have a spare PC you can create a account on your box for zoiper set it for vox. Then get zello for PC and create a account for you node. Then create a channel for your node. Place the account into the repeater channel. Use virtual audio cables and point zello to zoiper and cross the cables. Works slicker than sh*t! Obviously your zoiper connection is left up full time. Also I password protect my channel.

Feel free to connect to my node and I'll give you a demo.

We have a regular user who is over the road trucker and zello plays nice with his blue parrot headset also much more "PTT radio like" friendly. Also I can record repeater activity too!

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.