I'm sure Allmon users will be happy to know that the Node Information column now shows the frequency, callsign and location. Thanks goes to the Duuude for maling this data available to us.
From the readme:
Allstar Database - If you don't have the Allstar "database" (really just a text file) the Node Information column will only show the IP address of the remote nodes. - The included database (astdb.txt) is likely old by the time you install. It should be periodically updated with the astdb.php script. Please set your cron job to a reasonable time, like once a day and manually run when you need the occasional adhoc update. - Mark astdb.php executable and add to cron. Run just once a day please. ie 01 03 * * * cd /var/www/html/allmon; ./astdb.php -- Tim :wq
On 11/11/12 11:01 PM, Tim Sawyer wrote:
I'm sure Allmon users will be happy to know that the Node Information column now shows the frequency, callsign and location. Thanks goes to the Duuude for maling this data available to us.
Again...Tim...excellent execution...sweet presentation. Just what the Dr. ordered. And shows up just nicely on smartphones and tablets. Hmmm...find that kerchunker...or just see where stuff is coming from. Tres useful...:) Thanks...!!!! -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.
On 11/11/2012 11:01 PM, Tim Sawyer wrote:
I'm sure Allmon users will be happy to know that the Node Information column now shows the frequency, callsign and location. Thanks goes to the Duuude for maling this data available to us.
<-- Hi Tim; Looking good: http://199.212.121.20:5088/allmon/link.php?node=2248 Some feedback: 1. Asterisk does not like a special character iin the password (as specified in the manager.conf file) - I keep on getting authentication errors. I took the special character ($) out of my passwd and bingo! 2. Similar for the htpasswd for the control op' to login - doesn't like a special character. 3. On the main page, the node callsign is displayed twice, can we suppress one of the callsigns? 4. Any way of suppressing the manager login / logout messages from the CLI? - I presume these are also being written to the asterisk log file as well (haven't had the time to check - but can only imagine what's happening to the log file). In my example, I have nodes 27919 and 28762 on a different server; we discussed this a week ago - I used iptables on the remote node to lock down the control port :) On one of my sites, I am behind a CPE NAT f/w - which is masquerading all WAN IP's - so iptables doesn't help too much there! - so I installed allmon on that system separately. Cheers! Ramesh.
participants (3)
-
Bryan D. Boyle -
Ramesh Dhami (VA3UV) -
Tim Sawyer