Hi All, I know this has been asked before. I have 2 node boxes and would like to put both on the same router/IP. I would like to change the def port on one of the nodes to 4568 so I can operate both boxes. The first server has 4 nodes on it already and maxed out on the USB ports. So using second box to add an extra node. I remember somebody saying that a change must be made in the node and the folks at Allstar have to set something in the server? Please advise. Thanks. Jon VA3RQ
that's an easy one.. The first 2 lines of the iax.conf file in the [general] stanza generally are: bindport=4569 bindaddr=0.0.0.0 Just make the "bindport" whatever port you want it to be, and dont forget to change the port number for the server in the Allstar portal, so that it will get announced properly. JIM WB6NIL
Date: Sat, 2 Oct 2010 09:45:17 -0400 From: jrorke@cogeco.ca To: app_rpt-users@qrvc.com Subject: [App_rpt-users] how do I change default port from 4569 to 4568 on node?
Hi All, I know this has been asked before. I have 2 node boxes and would like to put both on the same router/IP. I would like to change the def port on one of the nodes to 4568 so I can operate both boxes.
The first server has 4 nodes on it already and maxed out on the USB ports. So using second box to add an extra node.
I remember somebody saying that a change must be made in the node and the folks at Allstar have to set something in the server?
Please advise.
Thanks. Jon VA3RQ
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
Excellent! thanks guys. Jon On 10/2/2010 10:37 AM, Jim Duuuude wrote:
that's an easy one..
The first 2 lines of the iax.conf file in the [general] stanza generally are:
bindport=4569 bindaddr=0.0.0.0
Just make the "bindport" whatever port you want it to be, and dont forget to change the port number for the server in the Allstar portal, so that it will get announced properly.
JIM WB6NIL
Date: Sat, 2 Oct 2010 09:45:17 -0400 From: jrorke@cogeco.ca To: app_rpt-users@qrvc.com Subject: [App_rpt-users] how do I change default port from 4569 to 4568 on node?
Hi All, I know this has been asked before. I have 2 node boxes and would like to put both on the same router/IP. I would like to change the def port on one of the nodes to 4568 so I can operate both boxes.
The first server has 4 nodes on it already and maxed out on the USB ports. So using second box to add an extra node.
I remember somebody saying that a change must be made in the node and the folks at Allstar have to set something in the server?
Please advise.
Thanks. Jon VA3RQ
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
participants (2)
-
Jim Duuuude -
REDBUTTON_CTRL