Didn't hear any 'net' on, last night. Will try to listen this evening. 73 = Best Regards, -Geoff/W5OMR (29655) On Mon, Jun 18, 2018 at 8:39 PM, James R. Pilgram <jim.pilgram@gmail.com> wrote:

I believe its Wednesday for y'all on the other side of the international date line.

On 06/18/2018 02:40 PM, Bob Good wrote:

Good Evening

Is the Tech net on to day ?

73

Bob

VK6ZGN

*From:* App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org <app_rpt-users-bounces@lists.allstarlink.org>] *On Behalf Of *Mike *Sent:* Saturday, 9 June 2018 02:58 *To:* app_rpt-users@lists.allstarlink.org *Subject:* [App_rpt-users] ASL Digital Radio/MMDVM Intro Tech "NET" Tues June 19 @ 00:30z **********************

A "TECH NET" concerning *"Getting Started with"*

Digital Modes / DMR /YSF /P25 /DSTAR /NXDN using MMDVM and bridging these to ALLSTAR

To be held on the Allstar Network at

*8:30 pm esdst / 00:30 utc - TUES JUNE 19, 2018*

*Please connect 15 minutes or more in advance for audio checks and the like.*

*Guest Speakers N4IRS Steve & N4IRR Mike of the dev crew at DVswitch/Allstar*

Introductions to the digital radio field of /software/hardware and relationship/connectivity with Allstar software

And as much Q & A at the end as we can sneak in. "Round-table" discussion to follow after the net.

To help split the 'potential' bandwidth demands,

Those *west of the Mississippi*, please connect on *29993*

AND* OHIO only* on *49999* And the rest *east of the Mississippi* on *29999*

So we don't possibly get overwhelmed with personal node streams.

Echolink nodes *KB8JNM-L ( 155783 )* *east* & *KB8JNM-R ( 804396 ) west* both available

*Please connect 15 minutes or more in advance for audio checks and the like.*

*I am looking for someone that can take copy of web links/info mentioned during the net *

*to be posted somewhere afterwards and a back-up net control to standby. Please contact by reply to this msg.*

*Please forward/distribute this email to interested party's !*

*Plans to have a follow-up net/round-table next month in July are in the works.*

*Any last minute/after net info will be posted at www.29999.link <http://www.29999.link>*

If you are intending to use DMR, you will need a DMR ID. Current confusion on this and a low availibility of numbers to issue seem to be a problem we 'may' address during the net.

*Some quick reference links: **(just a 'starter' reference)*

*Getting started cheap hardware: (not endorsing anything)*

*MMDVM:*

https://www.ebay.com/sch/i.html?_nkw=dmr+hotspot&LH_BIN=1

https://www.ebay.com/itm/UHF-VHF-MMDVM-hotspot-OLED- Antenna-Case-Support-P25-DMR-YSF-for-Raspberry-pi/ 112884599135?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

---------

*Pi* (make sure you are getting one that fits your hardware/software needs)

https://www.ebay.com/itm/Raspberry-Pi-3-Model-B-ARM- Cortex-A53-CPU-1-2GHz-64-Bit-Quad-Core-1GB-RAM-10-B/232791278848?hash= item3633710500:g:KAkAAOSwtJBbEmjH

https://www.ebay.com/itm/Raspberry-Pi-Zero-V1-3-W-1GHz- 512MB-Integrat-WiFi-Bluetooth-Mini-Micro-HDMI-USB/ 222903760316?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

---------

*Pi-Star: *https://www.pistar.uk/downloads/

---------

*Most Common 'good' starter radio DMR-UHF:*

https://www.ebay.com/itm/TYT-MD-380-UHF-Analog-Digital- Tier-II-DMR-DMR-Radio-USB-cable-Software-US-Seller/ 291640635414?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Latest Software for the MD380:

http://www.tyt888.com/?mod=download

-------------

*Code Plug Data :*

http://arrl-ohio.org/digital/digital.html - *(for the state of Ohio):*

https://www.repeaterbook.com/repeaters/feature_search.php? state_id=42&type=DMR

https://dmrtexas.net/

-------------

*DVswitch - *dv gateway for allstar

https://dvswitch.groups.io/g/main/wiki/Home

https://dvswitch.groups.io/g/main/topics

https://dvswitch.groups.io/g/main/topic/updated_dvswitch_ repository/18971786?p=,,,20,0,0,0::recentpostdate%2Fsticky,, ,20,2,0,18971786

_______________________________________________ App_rpt-users mailing listApp_rpt-users@lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- Operating your AM rig without a scope is like driving our car at night without headlights. (~K4KYV) 73 = Best Regards, -Geoff/W5OMR

When does Tuesday, June 19th at 00:30z occurs for You? For me, in the Central Time Zone, it was last night (Monday), at 19:30 local. If it's to happen in roughly 2.5 hours, that'd make it 00:30z on WEDNESDAY, or, is that too difficult to understand? For you, in Ohio, in the EASTERN time zone, 00:30z occurs at 20:30, or 8:30 (if military time is too difficult to calculate for you). You -do- realize that once the clock passed from 23:59:59 to 00:00:01, Monday becomes Tuesday... don't You? Let's review... 00:30z Tuesday, occurs at 20:30 EST MONDAY NIGHT! Maybe someone sold you a defective calandar? On Tue, Jun 19, 2018, 10:51 Mike <mm@midnighteng.com> wrote:

You did not hear anything because you are using the wrong calendar.

or

you did not 'READ' the message ?

The date and time were posted largely as well as a link

I can see it in your reply, so I know you got the whole message.

... don't know how to make that easier, but I am open for suggestions....

On 6/19/2018 11:42 AM, ARS W5OMR wrote:

Didn't hear any 'net' on, last night. Will try to listen this evening.

73 = Best Regards, -Geoff/W5OMR (29655)

On Mon, Jun 18, 2018 at 8:39 PM, James R. Pilgram <jim.pilgram@gmail.com> wrote:

...

I believe its Wednesday for y'all on the other side of the international date line.

On 06/18/2018 02:40 PM, Bob Good wrote:

Good Evening

Is the Tech net on to day ?

73

Bob

VK6ZGN

*From:* App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org <app_rpt-users-bounces@lists.allstarlink.org>] *On Behalf Of *Mike *Sent:* Saturday, 9 June 2018 02:58 *To:* app_rpt-users@lists.allstarlink.org *Subject:* [App_rpt-users] ASL Digital Radio/MMDVM Intro Tech "NET" Tues June 19 @ 00:30z **********************

A "TECH NET" concerning *"Getting Started with"*

Digital Modes / DMR /YSF /P25 /DSTAR /NXDN using MMDVM and bridging these to ALLSTAR

To be held on the Allstar Network at

*8:30 pm esdst / 00:30 utc - TUES JUNE 19, 2018*

*Please connect 15 minutes or more in advance for audio checks and the like.*

*Guest Speakers N4IRS Steve & N4IRR Mike of the dev crew at DVswitch/Allstar*

Introductions to the digital radio field of /software/hardware and relationship/connectivity with Allstar software

And as much Q & A at the end as we can sneak in. "Round-table" discussion to follow after the net.

To help split the 'potential' bandwidth demands,

Those *west of the Mississippi*, please connect on *29993*

AND* OHIO only* on *49999* And the rest *east of the Mississippi* on *29999*

So we don't possibly get overwhelmed with personal node streams.

Echolink nodes *KB8JNM-L ( 155783 )* *east* & *KB8JNM-R ( 804396 ) west* both available

*Please connect 15 minutes or more in advance for audio checks and the like.*

*I am looking for someone that can take copy of web links/info mentioned during the net *

*to be posted somewhere afterwards and a back-up net control to standby. Please contact by reply to this msg.*

*Please forward/distribute this email to interested party's !*

*Plans to have a follow-up net/round-table next month in July are in the works.*

*Any last minute/after net info will be posted at www.29999.link <http://www.29999.link>*

If you are intending to use DMR, you will need a DMR ID. Current confusion on this and a low availibility of numbers to issue seem to be a problem we 'may' address during the net.

*Some quick reference links: **(just a 'starter' reference)*

*Getting started cheap hardware: (not endorsing anything)*

*MMDVM:*

https://www.ebay.com/sch/i.html?_nkw=dmr+hotspot&LH_BIN=1

https://www.ebay.com/itm/UHF-VHF-MMDVM-hotspot-OLED-Antenna-Case-Support-P25...

---------

*Pi* (make sure you are getting one that fits your hardware/software needs)

https://www.ebay.com/itm/Raspberry-Pi-3-Model-B-ARM-Cortex-A53-CPU-1-2GHz-64...

https://www.ebay.com/itm/Raspberry-Pi-Zero-V1-3-W-1GHz-512MB-Integrat-WiFi-B...

---------

*Pi-Star: *https://www.pistar.uk/downloads/

---------

*Most Common 'good' starter radio DMR-UHF:*

https://www.ebay.com/itm/TYT-MD-380-UHF-Analog-Digital-Tier-II-DMR-DMR-Radio...

Latest Software for the MD380:

http://www.tyt888.com/?mod=download

-------------

*Code Plug Data :*

http://arrl-ohio.org/digital/digital.html - *(for the state of Ohio):*

https://www.repeaterbook.com/repeaters/feature_search.php?state_id=42&type=D...

https://dmrtexas.net/

-------------

*DVswitch - *dv gateway for allstar

https://dvswitch.groups.io/g/main/wiki/Home

https://dvswitch.groups.io/g/main/topics

https://dvswitch.groups.io/g/main/topic/updated_dvswitch_repository/18971786...

_______________________________________________ App_rpt-users mailing listApp_rpt-users@lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- Operating your AM rig without a scope is like driving our car at night without headlights. (~K4KYV)

73 = Best Regards, -Geoff/W5OMR

_______________________________________________ App_rpt-users mailing listApp_rpt-users@lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

Just connected to 29993 worked fine here. -------- Original message --------From: David Shaw <shawpbx@gmail.com> Date: 6/19/18 1:46 PM (GMT-06:00) To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] ASL Digital Radio/MMDVM Intro Tech "NET" Tues June 19 @ 00:30z ********************** Just testing the connection to 29993 and it failed. I can connect to 2000 and 2100. David --Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Fri, Jun 8, 2018 at 11:58 AM, Mike <mm@midnighteng.com> wrote: A "TECH NET" concerning  "Getting Started with" Digital Modes / DMR  /YSF /P25 /DSTAR /NXDN using MMDVM and bridging these to ALLSTAR To be held on the Allstar Network at 8:30 pm esdst / 00:30 utc  - TUES JUNE 19, 2018 Please connect 15 minutes or more in advance for audio checks and the like. Guest Speakers N4IRS Steve & N4IRR Mike of the dev crew at DVswitch/Allstar Introductions to the digital radio field of /software/hardware and relationship/connectivity with Allstar software And as much Q & A at the end as we can sneak in. "Round-table" discussion to follow after the net. To help split the 'potential' bandwidth demands, Those west of the Mississippi, please connect on 29993  AND OHIO only on 49999 And the rest east of the Mississippi on 29999 So we don't possibly get overwhelmed with personal node streams. Echolink nodes KB8JNM-L ( 155783 ) east   &   KB8JNM-R  ( 804396 ) west  both available Please connect 15 minutes or more in advance for audio checks and the like. I am looking for someone that can take copy of web links/info mentioned during the net to be posted somewhere afterwards and a back-up net control to standby. Please contact by reply to this msg. Please forward/distribute this email to interested party's ! Plans to have a follow-up net/round-table next month in July are in the works. Any last minute/after net info will be posted at  www.29999.link If you are intending to use DMR, you will need a DMR ID. Current confusion on this and a low availibility of numbers to issue seem to be a problem we 'may' address during the net. Some quick reference links: (just a 'starter' reference) Getting started cheap hardware: (not endorsing anything) MMDVM: https://www.ebay.com/sch/i.html?_nkw=dmr+hotspot&LH_BIN=1 https://www.ebay.com/itm/UHF-VHF-MMDVM-hotspot-OLED-Antenna-Case-Support-P25... --------- Pi (make sure you are getting one that fits your hardware/software needs) https://www.ebay.com/itm/Raspberry-Pi-3-Model-B-ARM-Cortex-A53-CPU-1-2GHz-64... https://www.ebay.com/itm/Raspberry-Pi-Zero-V1-3-W-1GHz-512MB-Integrat-WiFi-B... --------- Pi-Star:  https://www.pistar.uk/downloads/ --------- Most Common 'good' starter radio DMR-UHF: https://www.ebay.com/itm/TYT-MD-380-UHF-Analog-Digital-Tier-II-DMR-DMR-Radio... Latest Software for the MD380: http://www.tyt888.com/?mod=download ------------- Code Plug Data : http://arrl-ohio.org/digital/digital.html  -  (for the state of Ohio): https://www.repeaterbook.com/repeaters/feature_search.php?state_id=42&type=D... https://dmrtexas.net/ ------------- DVswitch - dv gateway for allstar https://dvswitch.groups.io/g/main/wiki/Home https://dvswitch.groups.io/g/main/topics https://dvswitch.groups.io/g/main/topic/updated_dvswitch_repository/18971786... _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

Lets hold off. It could be my uptime is less then 15 minutes. -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Tue, Jun 19, 2018 at 12:00 PM, David Shaw <shawpbx@gmail.com> wrote:

It a no go on my side.

David

-- Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson

On Tue, Jun 19, 2018 at 11:56 AM, David <david@kg5rdf.com> wrote:

...

Just connected to 29993 worked fine here.

-------- Original message -------- From: David Shaw <shawpbx@gmail.com> Date: 6/19/18 1:46 PM (GMT-06:00) To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] ASL Digital Radio/MMDVM Intro Tech "NET" Tues June 19 @ 00:30z **********************

Just testing the connection to 29993 and it failed. I can connect to 2000 and 2100.

David

-- Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson

On Fri, Jun 8, 2018 at 11:58 AM, Mike <mm@midnighteng.com> wrote:

...

A "TECH NET" concerning *"Getting Started with" *

Digital Modes / DMR /YSF /P25 /DSTAR /NXDN using MMDVM and bridging these to ALLSTAR

To be held on the Allstar Network at

*8:30 pm esdst / 00:30 utc - TUES JUNE 19, 2018*

*Please connect 15 minutes or more in advance for audio checks and the like.*

*Guest Speakers N4IRS Steve & N4IRR Mike of the dev crew at DVswitch/Allstar*

Introductions to the digital radio field of /software/hardware and relationship/connectivity with Allstar software

And as much Q & A at the end as we can sneak in. "Round-table" discussion to follow after the net.

To help split the 'potential' bandwidth demands,

Those *west of the Mississippi*, please connect on *29993*

AND* OHIO only* on *49999* And the rest *east of the Mississippi* on *29999*

So we don't possibly get overwhelmed with personal node streams.

Echolink nodes *KB8JNM-L ( 155783 )* *east* & *KB8JNM-R ( 804396 ) west* both available

*Please connect 15 minutes or more in advance for audio checks and the like.*

*I am looking for someone that can take copy of web links/info mentioned during the net *

*to be posted somewhere afterwards and a back-up net control to standby. Please contact by reply to this msg. *

*Please forward/distribute this email to interested party's !*

*Plans to have a follow-up net/round-table next month in July are in the works.*

*Any last minute/after net info will be posted at www.29999.link <http://www.29999.link>*

If you are intending to use DMR, you will need a DMR ID. Current confusion on this and a low availibility of numbers to issue seem to be a problem we 'may' address during the net.

*Some quick reference links: **(just a 'starter' reference)*

*Getting started cheap hardware: (not endorsing anything) *

*MMDVM:*

https://www.ebay.com/sch/i.html?_nkw=dmr+hotspot&LH_BIN=1

https://www.ebay.com/itm/UHF-VHF-MMDVM-hotspot-OLED-Antenna- Case-Support-P25-DMR-YSF-for-Raspberry-pi/112884599135?ssPag eName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

---------

*Pi* (make sure you are getting one that fits your hardware/software needs)

https://www.ebay.com/itm/Raspberry-Pi-3-Model-B-ARM-Cortex-A 53-CPU-1-2GHz-64-Bit-Quad-Core-1GB-RAM-10-B/232791278848? hash=item3633710500:g:KAkAAOSwtJBbEmjH

https://www.ebay.com/itm/Raspberry-Pi-Zero-V1-3-W-1GHz-512MB -Integrat-WiFi-Bluetooth-Mini-Micro-HDMI-USB/222903760316?ss PageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

---------

*Pi-Star: *https://www.pistar.uk/downloads/

---------

*Most Common 'good' starter radio DMR-UHF:*

https://www.ebay.com/itm/TYT-MD-380-UHF-Analog-Digital-Tier- II-DMR-DMR-Radio-USB-cable-Software-US-Seller/291640635414? ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Latest Software for the MD380:

http://www.tyt888.com/?mod=download

-------------

*Code Plug Data :*

http://arrl-ohio.org/digital/digital.html - *(for the state of Ohio):*

https://www.repeaterbook.com/repeaters/feature_search.php?st ate_id=42&type=DMR

https://dmrtexas.net/

-------------

*DVswitch - *dv gateway for allstar

https://dvswitch.groups.io/g/main/wiki/Home

https://dvswitch.groups.io/g/main/topics

https://dvswitch.groups.io/g/main/topic/updated_dvswitch_rep ository/18971786?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20 ,2,0,18971786

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

Still no go. David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Tue, Jun 19, 2018 at 12:03 PM, John <wb5nfc@gmail.com> wrote:

Connection failed for me as well. Just tried (again).

John / WB5NFC ASL 27911

Sent from my iPhone

On Jun 19, 2018, at 2:00 PM, David Shaw <shawpbx@gmail.com> wrote:

It a no go on my side.

David

-- Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson

On Tue, Jun 19, 2018 at 11:56 AM, David <david@kg5rdf.com> wrote:

...

Just connected to 29993 worked fine here.

-------- Original message -------- From: David Shaw <shawpbx@gmail.com> Date: 6/19/18 1:46 PM (GMT-06:00) To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] ASL Digital Radio/MMDVM Intro Tech "NET" Tues June 19 @ 00:30z **********************

Just testing the connection to 29993 and it failed. I can connect to 2000 and 2100.

David

-- Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson

On Fri, Jun 8, 2018 at 11:58 AM, Mike <mm@midnighteng.com> wrote:

...

A "TECH NET" concerning *"Getting Started with" *

Digital Modes / DMR /YSF /P25 /DSTAR /NXDN using MMDVM and bridging these to ALLSTAR

To be held on the Allstar Network at

*8:30 pm esdst / 00:30 utc - TUES JUNE 19, 2018*

*Please connect 15 minutes or more in advance for audio checks and the like.*

*Guest Speakers N4IRS Steve & N4IRR Mike of the dev crew at DVswitch/Allstar*

Introductions to the digital radio field of /software/hardware and relationship/connectivity with Allstar software

And as much Q & A at the end as we can sneak in. "Round-table" discussion to follow after the net.

To help split the 'potential' bandwidth demands,

Those *west of the Mississippi*, please connect on *29993*

AND* OHIO only* on *49999* And the rest *east of the Mississippi* on *29999*

So we don't possibly get overwhelmed with personal node streams.

Echolink nodes *KB8JNM-L ( 155783 )* *east* & *KB8JNM-R ( 804396 ) west* both available

*Please connect 15 minutes or more in advance for audio checks and the like.*

*I am looking for someone that can take copy of web links/info mentioned during the net *

*to be posted somewhere afterwards and a back-up net control to standby. Please contact by reply to this msg. *

*Please forward/distribute this email to interested party's !*

*Plans to have a follow-up net/round-table next month in July are in the works.*

*Any last minute/after net info will be posted at www.29999.link <http://www.29999.link>*

If you are intending to use DMR, you will need a DMR ID. Current confusion on this and a low availibility of numbers to issue seem to be a problem we 'may' address during the net.

*Some quick reference links: **(just a 'starter' reference)*

*Getting started cheap hardware: (not endorsing anything) *

*MMDVM:*

https://www.ebay.com/sch/i.html?_nkw=dmr+hotspot&LH_BIN=1

https://www.ebay.com/itm/UHF-VHF-MMDVM-hotspot-OLED-Antenna- Case-Support-P25-DMR-YSF-for-Raspberry-pi/112884599135?ssPag eName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

---------

*Pi* (make sure you are getting one that fits your hardware/software needs)

https://www.ebay.com/itm/Raspberry-Pi-3-Model-B-ARM-Cortex-A 53-CPU-1-2GHz-64-Bit-Quad-Core-1GB-RAM-10-B/232791278848? hash=item3633710500:g:KAkAAOSwtJBbEmjH

https://www.ebay.com/itm/Raspberry-Pi-Zero-V1-3-W-1GHz-512MB -Integrat-WiFi-Bluetooth-Mini-Micro-HDMI-USB/222903760316?ss PageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

---------

*Pi-Star: *https://www.pistar.uk/downloads/

---------

*Most Common 'good' starter radio DMR-UHF:*

https://www.ebay.com/itm/TYT-MD-380-UHF-Analog-Digital-Tier- II-DMR-DMR-Radio-USB-cable-Software-US-Seller/291640635414? ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Latest Software for the MD380:

http://www.tyt888.com/?mod=download

-------------

*Code Plug Data :*

http://arrl-ohio.org/digital/digital.html - *(for the state of Ohio):*

https://www.repeaterbook.com/repeaters/feature_search.php?st ate_id=42&type=DMR

https://dmrtexas.net/

-------------

*DVswitch - *dv gateway for allstar

https://dvswitch.groups.io/g/main/wiki/Home

https://dvswitch.groups.io/g/main/topics

https://dvswitch.groups.io/g/main/topic/updated_dvswitch_rep ository/18971786?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20 ,2,0,18971786

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

<ConnectionFailed.txt>

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

Sorry that didn't work as well. David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Tue, Jun 19, 2018 at 12:40 PM, Steve Zingman <szingman@msgstor.com> wrote:

Try 29999

On 6/19/2018 3:40 PM, David Shaw wrote:

Still no go.

David

-- Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson

On Tue, Jun 19, 2018 at 12:03 PM, John <wb5nfc@gmail.com> wrote:

...

Connection failed for me as well. Just tried (again).

John / WB5NFC ASL 27911

Sent from my iPhone

On Jun 19, 2018, at 2:00 PM, David Shaw <shawpbx@gmail.com> wrote:

It a no go on my side.

David

-- Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson

On Tue, Jun 19, 2018 at 11:56 AM, David <david@kg5rdf.com> wrote:

...

Just connected to 29993 worked fine here.

-------- Original message -------- From: David Shaw <shawpbx@gmail.com> Date: 6/19/18 1:46 PM (GMT-06:00) To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] ASL Digital Radio/MMDVM Intro Tech "NET" Tues June 19 @ 00:30z **********************

Just testing the connection to 29993 and it failed. I can connect to 2000 and 2100.

David

-- Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson

On Fri, Jun 8, 2018 at 11:58 AM, Mike <mm@midnighteng.com> wrote:

...

A "TECH NET" concerning *"Getting Started with" *

Digital Modes / DMR /YSF /P25 /DSTAR /NXDN using MMDVM and bridging these to ALLSTAR

To be held on the Allstar Network at

*8:30 pm esdst / 00:30 utc - TUES JUNE 19, 2018*

*Please connect 15 minutes or more in advance for audio checks and the like.*

*Guest Speakers N4IRS Steve & N4IRR Mike of the dev crew at DVswitch/Allstar*

Introductions to the digital radio field of /software/hardware and relationship/connectivity with Allstar software

And as much Q & A at the end as we can sneak in. "Round-table" discussion to follow after the net.

To help split the 'potential' bandwidth demands,

Those *west of the Mississippi*, please connect on *29993*

AND* OHIO only* on *49999* And the rest *east of the Mississippi* on *29999*

So we don't possibly get overwhelmed with personal node streams.

Echolink nodes *KB8JNM-L ( 155783 )* *east* & *KB8JNM-R ( 804396 ) west* both available

*Please connect 15 minutes or more in advance for audio checks and the like.*

*I am looking for someone that can take copy of web links/info mentioned during the net *

*to be posted somewhere afterwards and a back-up net control to standby. Please contact by reply to this msg. *

*Please forward/distribute this email to interested party's !*

*Plans to have a follow-up net/round-table next month in July are in the works.*

*Any last minute/after net info will be posted at www.29999.link <http://www.29999.link>*

If you are intending to use DMR, you will need a DMR ID. Current confusion on this and a low availibility of numbers to issue seem to be a problem we 'may' address during the net.

*Some quick reference links: **(just a 'starter' reference)*

*Getting started cheap hardware: (not endorsing anything) *

*MMDVM:*

https://www.ebay.com/sch/i.html?_nkw=dmr+hotspot&LH_BIN=1

https://www.ebay.com/itm/UHF-VHF-MMDVM-hotspot-OLED-Antenna- Case-Support-P25-DMR-YSF-for-Raspberry-pi/112884599135?ssPag eName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

---------

*Pi* (make sure you are getting one that fits your hardware/software needs)

https://www.ebay.com/itm/Raspberry-Pi-3-Model-B-ARM-Cortex-A 53-CPU-1-2GHz-64-Bit-Quad-Core-1GB-RAM-10-B/232791278848?has h=item3633710500:g:KAkAAOSwtJBbEmjH

https://www.ebay.com/itm/Raspberry-Pi-Zero-V1-3-W-1GHz-512MB -Integrat-WiFi-Bluetooth-Mini-Micro-HDMI-USB/222903760316?ss PageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

---------

*Pi-Star: *https://www.pistar.uk/downloads/

---------

*Most Common 'good' starter radio DMR-UHF:*

https://www.ebay.com/itm/TYT-MD-380-UHF-Analog-Digital-Tier- II-DMR-DMR-Radio-USB-cable-Software-US-Seller/291640635414?s sPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Latest Software for the MD380:

http://www.tyt888.com/?mod=download

-------------

*Code Plug Data :*

http://arrl-ohio.org/digital/digital.html - *(for the state of Ohio):*

https://www.repeaterbook.com/repeaters/feature_search.php?st ate_id=42&type=DMR

https://dmrtexas.net/

-------------

*DVswitch - *dv gateway for allstar

https://dvswitch.groups.io/g/main/wiki/Home

https://dvswitch.groups.io/g/main/topics

https://dvswitch.groups.io/g/main/topic/updated_dvswitch_rep ository/18971786?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20 ,2,0,18971786

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

<ConnectionFailed.txt>

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing listApp_rpt-users@lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

If you are having a problem with 29999 or 29993. Use 2600 If possible we will move you back to 29999 or 29993 before the net. Steve On 6/19/2018 4:10 PM, ssedgwick wrote:

Same here, connection failed on both 29993 and 29999. Steve_WB8GRS

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

was in audio file made of the net i didn't get stay for it jimmy ka3vgm

ok thanks

Jeff, It would be MOST appreciated if you could stitch together a archive. Mike started and stayed on 2600 throughout. I started on 29999 and switched to 2600 when the problems arose. Steve On 6/20/2018 3:07 PM, Jeff DePolo wrote:

...

...

was in audio file made of the net i didn't get stay for it jimmy ka3vgm Not this time. We will do the presentation again and make sure there is a audio archive.

Steve I should have an audio archive. I can concatenate the files and shrink them into a reasonable-bitrate MP3 or AAC if there is interest; please respond if interested. I had 2300 linked to 2600 for the duration (2300 was logging audio). While there were a few occasions where it seemed like Steve or Mike had lost connectivity for a few seconds, for the most part it was solid, no disconnects/reconnects or anything that I noticed between here and 2600. 2600 seemed to have fewer issues than some of the other hubs; others were reporting things like "we only heard 10% of what you said last time", yet I heard it fine via 2600/2300. Steve and Mike, were you using 2600 as your entry point?

--- Jeff WN3A

--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

I will have a full report for the group on thurs/fri, The issues for the net last night are much different set of issues than many think. but no, the audio was amuck on 2 instances for the attempt. ...mike/kb8jnm On 6/20/2018 10:39 AM, jimmy keffer wrote:

was in audio file made of the net i didn't get stay for it jimmy ka3vgm _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

I will try Echolink. I was not around long enough today to make needed node test. I am going to try 8:30 PM EST. THAT bit about the time is a little confusing. Sent from my iPad

On Jun 19, 2018, at 3:00 PM, David Shaw <shawpbx@gmail.com> wrote:

It a no go on my side.

David

-- Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson

...

On Tue, Jun 19, 2018 at 11:56 AM, David <david@kg5rdf.com> wrote: Just connected to 29993 worked fine here.

-------- Original message -------- From: David Shaw <shawpbx@gmail.com> Date: 6/19/18 1:46 PM (GMT-06:00) To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] ASL Digital Radio/MMDVM Intro Tech "NET" Tues June 19 @ 00:30z **********************

Just testing the connection to 29993 and it failed. I can connect to 2000 and 2100.

David

-- Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson

...

On Fri, Jun 8, 2018 at 11:58 AM, Mike <mm@midnighteng.com> wrote: A "TECH NET" concerning "Getting Started with"

Digital Modes / DMR /YSF /P25 /DSTAR /NXDN using MMDVM and bridging these to ALLSTAR

To be held on the Allstar Network at

8:30 pm esdst / 00:30 utc - TUES JUNE 19, 2018

Please connect 15 minutes or more in advance for audio checks and the like.

Guest Speakers N4IRS Steve & N4IRR Mike of the dev crew at DVswitch/Allstar

Introductions to the digital radio field of /software/hardware and relationship/connectivity with Allstar software And as much Q & A at the end as we can sneak in. "Round-table" discussion to follow after the net. To help split the 'potential' bandwidth demands,

Those west of the Mississippi, please connect on 29993

AND OHIO only on 49999 And the rest east of the Mississippi on 29999

So we don't possibly get overwhelmed with personal node streams. Echolink nodes KB8JNM-L ( 155783 ) east & KB8JNM-R ( 804396 ) west both available Please connect 15 minutes or more in advance for audio checks and the like.

I am looking for someone that can take copy of web links/info mentioned during the net

to be posted somewhere afterwards and a back-up net control to standby. Please contact by reply to this msg.

Please forward/distribute this email to interested party's !

Plans to have a follow-up net/round-table next month in July are in the works.

Any last minute/after net info will be posted at www.29999.link

If you are intending to use DMR, you will need a DMR ID. Current confusion on this and a low availibility of numbers to issue seem to be a problem we 'may' address during the net.

Some quick reference links: (just a 'starter' reference)

Getting started cheap hardware: (not endorsing anything)

MMDVM:

https://www.ebay.com/sch/i.html?_nkw=dmr+hotspot&LH_BIN=1

https://www.ebay.com/itm/UHF-VHF-MMDVM-hotspot-OLED-Antenna-Case-Support-P25...

--------- Pi (make sure you are getting one that fits your hardware/software needs)

https://www.ebay.com/itm/Raspberry-Pi-3-Model-B-ARM-Cortex-A53-CPU-1-2GHz-64...

https://www.ebay.com/itm/Raspberry-Pi-Zero-V1-3-W-1GHz-512MB-Integrat-WiFi-B... --------- Pi-Star: https://www.pistar.uk/downloads/ --------- Most Common 'good' starter radio DMR-UHF:

https://www.ebay.com/itm/TYT-MD-380-UHF-Analog-Digital-Tier-II-DMR-DMR-Radio...

Latest Software for the MD380:

http://www.tyt888.com/?mod=download

------------- Code Plug Data :

http://arrl-ohio.org/digital/digital.html - (for the state of Ohio):

https://www.repeaterbook.com/repeaters/feature_search.php?state_id=42&type=D... https://dmrtexas.net/

------------- DVswitch - dv gateway for allstar

https://dvswitch.groups.io/g/main/wiki/Home

https://dvswitch.groups.io/g/main/topics

https://dvswitch.groups.io/g/main/topic/updated_dvswitch_repository/18971786...

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

<ConnectionFailed.txt> _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.