Jeff, If you have them in the original form from a allstar archive production, could you just zip them into one file and send them to me ? I originally was going to make a script to allow playback with timed breaks just as it originally played (minus imperfections) and connect that to a dummy node as a asset to be connected to and played back by command. ...mike/kb8jnm On 6/20/2018 3:07 PM, Jeff DePolo wrote:
was in audio file made of the net i didn't get stay for it jimmy ka3vgm Not this time. We will do the presentation again and make sure there is a audio archive.
Steve I should have an audio archive. I can concatenate the files and shrink them into a reasonable-bitrate MP3 or AAC if there is interest; please respond if interested. I had 2300 linked to 2600 for the duration (2300 was logging audio). While there were a few occasions where it seemed like Steve or Mike had lost connectivity for a few seconds, for the most part it was solid, no disconnects/reconnects or anything that I noticed between here and 2600. 2600 seemed to have fewer issues than some of the other hubs; others were reporting things like "we only heard 10% of what you said last time", yet I heard it fine via 2600/2300. Steve and Mike, were you using 2600 as your entry point?
--- Jeff WN3A
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.