I just updated to the most recent version of the Allstar image and my audio on my repeater disappeared. I can key up the system and it will reply back with the courtesy tone and the required ID every 15 minutes. It just doesn't transmit the audio through when someone trys to call out to another person. I checked the cables and radios and all are up and running and connected fine. I have disconnectged the cables and plugged them back in to test and the same lack of audio occurs. When I plug in the old ham-o-matic, audio comes through. Where should I be looking to check audio settings for the Motorola gm300 radios in the rpt.conf file? Thank you, Greg W2GCM
You did not state method of audio at app_rpt but double check your usb 'id of the audio device' and then look for corruptions in usbradio/simpleusb in the form of hidden characters. (use notepad+++ or similar 'show all characters') Also, did you re-write any of those config files and do you have the switching logic of cor correct. It's a place to start. ...mike/kb8jnm On 8/1/2018 12:57 PM, Greg Mohr wrote:
I just updated to the most recent version of the Allstar image and my audio on my repeater disappeared. I can key up the system and it will reply back with the courtesy tone and the required ID every 15 minutes. It just doesn't transmit the audio through when someone trys to call out to another person.
I checked the cables and radios and all are up and running and connected fine. I have disconnectged the cables and plugged them back in to test and the same lack of audio occurs. When I plug in the old ham-o-matic, audio comes through. Where should I be looking to check audio settings for the Motorola gm300 radios in the rpt.conf file?
Thank you, Greg W2GCM
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Log review for errors is also a good place to start Sent from the iRoad
On Aug 1, 2018, at 11:08, Mike <mm@midnighteng.com> wrote:
You did not state method of audio at app_rpt but double check your usb 'id of the audio device' and then look for corruptions in usbradio/simpleusb in the form of hidden characters. (use notepad+++ or similar 'show all characters') Also, did you re-write any of those config files and do you have the switching logic of cor correct.
It's a place to start.
...mike/kb8jnm
On 8/1/2018 12:57 PM, Greg Mohr wrote: I just updated to the most recent version of the Allstar image and my audio on my repeater disappeared. I can key up the system and it will reply back with the courtesy tone and the required ID every 15 minutes. It just doesn't transmit the audio through when someone trys to call out to another person. I checked the cables and radios and all are up and running and connected fine. I have disconnectged the cables and plugged them back in to test and the same lack of audio occurs. When I plug in the old ham-o-matic, audio comes through. Where should I be looking to check audio settings for the Motorola gm300 radios in the rpt.conf file? Thank you, Greg W2GCM _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
For a full repeater, make sure you have duplex=2 in your rpt.conf node stanza. ...From your description, you may be configured in duplex=1. 73, David KB4FXC On Wed, 1 Aug 2018, Greg Mohr wrote:
I just updated to the most recent version of the Allstar image and my audio on my repeater disappeared. I can key up the system and it will reply back with the courtesy tone and the required ID every 15 minutes. It just doesn't transmit the audio through when someone trys to call out to another person.
I checked the cables and radios and all are up and running and connected fine. I have disconnectged the cables and plugged them back in to test and the same lack of audio occurs. When I plug in the old ham-o-matic, audio comes through. Where should I be looking to check audio settings for the Motorola gm300 radios in the rpt.conf file?
Thank you, Greg W2GCM
participants (4)
-
David McGough -
Greg Mohr -
JJC -
Mike