Can I use it on an existing Ubuntu 18.04 install or is the package only intended for a Raspberry Pi install? Thanks, Corey
Guessing that 'IT' is a ASL install... There are different flavor packages. What is it that you have and want to put ASL on, hardware wise. Then we can point you in the right direction. ...mike/kb8jnm On 12/31/2018 12:01 PM, Corey wrote:
Can I use it on an existing Ubuntu 18.04 install or is the package only intended for a Raspberry Pi install?
Thanks, Corey
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Is there an rpm based installer for openSuSE? On Mon, Dec 31, 2018, 11:16 Mike <mm@midnighteng.com wrote:
Guessing that 'IT' is a ASL install...
There are different flavor packages.
What is it that you have and want to put ASL on, hardware wise.
Then we can point you in the right direction.
...mike/kb8jnm On 12/31/2018 12:01 PM, Corey wrote:
Can I use it on an existing Ubuntu 18.04 install or is the package only intended for a Raspberry Pi install?
Thanks, Corey
_______________________________________________ App_rpt-users mailing listApp_rpt-users@lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Nothing I am aware of. Why not say what computer hardware you want to put it on so we can point you correctly to what is available ? or read it yourself. https://allstarlink.org/getstarted.html http://dvswitch.org/files/ASL_Images/ ...mike/kb8jnm On 12/31/2018 12:18 PM, ARS W5OMR wrote:
Is there an rpm based installer for openSuSE?
On Mon, Dec 31, 2018, 11:16 Mike <mm@midnighteng.com <mailto:mm@midnighteng.com> wrote:
Guessing that 'IT' is a ASL install...
There are different flavor packages.
What is it that you have and want to put ASL on, hardware wise.
Then we can point you in the right direction.
...mike/kb8jnm
On 12/31/2018 12:01 PM, Corey wrote:
Can I use it on an existing Ubuntu 18.04 install or is the package only intended for a Raspberry Pi install?
Thanks, Corey
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Yes, https://wiki.allstarlink.org/wiki/ASL_FAQ - See Q/A number 4 -- Brian - VA3DXV On Mon, Dec 31, 2018 at 12:01 PM Corey <kc7mrq@gmail.com> wrote:
Can I use it on an existing Ubuntu 18.04 install or is the package only intended for a Raspberry Pi install?
Thanks, Corey _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 12/31/18 12:34 PM, Brian G wrote:
Yes, https://wiki.allstarlink.org/wiki/ASL_FAQ - See Q/A number 4
Much love on this new years eve for those who RTFM. <3 Note, this needs to be Debian 9. While it's certainly possible it will work on other debian based distros, all bets are off. If you want to run it on something else, grab the src from github and make install. It's kinda the view development took was, it should run anywhere, so why bother making a custom software distro. We compile it and officially support debian, but let debian handle the distro work, they are much better at it than we can be. AllStar is now no different than mariadb/etc, we just have software that runs on top of a distro. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
Hi, I tried... Hi, I'm trying to install asl from sources on my bananapi: Linux bananapim2plus 4.14.84-sunxi #3 SMP Sat Dec 1 07:18:41 CET 2018 armv7l GNU/Linux As explained here: https://wiki.allstarlink.org/wiki/ASL_FAQ During the installation appear some errors here: /var/lib/dkms/asl-dahdi-linux/2.11.1/build/make.log Especially this: make -C linux all make[1]: Entering directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux' make -C drivers/dahdi/firmware firmware-loaders make[2]: Entering directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi/firmware' make[2]: Leaving directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi/firmware' make -C /lib/modules/4.14.84-sunxi/build SUBDIRS=/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi DAHDI_INCLUDE=/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/include DAHDI_MODULES_EXTRA=" " HOTPLUG_FIRMWARE=yes modules DAHDI_BUILD_ALL=m make[2]: Entering directory '/usr/src/linux-headers-4.14.84-sunxi' Makefile:644: arch/-a: No such file or directory Makefile:644: armhf/Makefile: No such file or directory make[2]: *** No rule to make target 'armhf/Makefile'. Stop. make[2]: Leaving directory '/usr/src/linux-headers-4.14.84-sunxi' Makefile:74: recipe for target 'modules' failed make[1]: *** [modules] Error 2 make[1]: Leaving directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux' Makefile:9: recipe for target 'all' failed make: *** [all] Error 2 What can I do? Thanks, Marco IW0RED ------- But no one answered. :-) 73 Marco IW0RED On Mon, Dec 31, 2018 at 7:21 PM Bryan Fields <Bryan@bryanfields.net> wrote:
On 12/31/18 12:34 PM, Brian G wrote:
Yes, https://wiki.allstarlink.org/wiki/ASL_FAQ - See Q/A number 4
Much love on this new years eve for those who RTFM. <3
Note, this needs to be Debian 9. While it's certainly possible it will work on other debian based distros, all bets are off. If you want to run it on something else, grab the src from github and make install.
It's kinda the view development took was, it should run anywhere, so why bother making a custom software distro. We compile it and officially support debian, but let debian handle the distro work, they are much better at it than we can be. AllStar is now no different than mariadb/etc, we just have software that runs on top of a distro.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Marco Brunozzi Tel. +14152360004 Cel. +393483343274 Skype: marco.brunozzi Twitter: marcobrunozzi ---------------------------------------
I am fairly sure your kernel is past where asl will support sound as per our current standard. enhanced things | AllStar, Alsa & Pulseaudio without OSS <http://enhanced.github.io/2018/08/ASL_With_ALSA> You may need to re-compile the dahdi module ?? Never done it so can't say more but it's a lead to work from. ...mike/kb8jnm On 12/31/2018 2:52 PM, Marco Brunozzi wrote:
Hi, I tried...
Hi, I'm trying to install asl from sources on my bananapi: Linux bananapim2plus 4.14.84-sunxi #3 SMP Sat Dec 1 07:18:41 CET 2018 armv7l GNU/Linux
As explained here: https://wiki.allstarlink.org/wiki/ASL_FAQ
During the installation appear some errors here: /var/lib/dkms/asl-dahdi-linux/2.11.1/build/make.log
Especially this: make -C linux all make[1]: Entering directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux' make -C drivers/dahdi/firmware firmware-loaders make[2]: Entering directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi/firmware' make[2]: Leaving directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi/firmware' make -C /lib/modules/4.14.84-sunxi/build SUBDIRS=/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi DAHDI_INCLUDE=/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/include DAHDI_MODULES_EXTRA=" " HOTPLUG_FIRMWARE=yes modules DAHDI_BUILD_ALL=m make[2]: Entering directory '/usr/src/linux-headers-4.14.84-sunxi' Makefile:644: arch/-a: No such file or directory Makefile:644: armhf/Makefile: No such file or directory make[2]: *** No rule to make target 'armhf/Makefile'. Stop. make[2]: Leaving directory '/usr/src/linux-headers-4.14.84-sunxi' Makefile:74: recipe for target 'modules' failed make[1]: *** [modules] Error 2 make[1]: Leaving directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux' Makefile:9: recipe for target 'all' failed make: *** [all] Error 2
What can I do?
Thanks, Marco IW0RED ------- But no one answered. :-)
73 Marco IW0RED
On Mon, Dec 31, 2018 at 7:21 PM Bryan Fields <Bryan@bryanfields.net> wrote:
On 12/31/18 12:34 PM, Brian G wrote:
Yes, https://wiki.allstarlink.org/wiki/ASL_FAQ - See Q/A number 4 Much love on this new years eve for those who RTFM. <3
Note, this needs to be Debian 9. While it's certainly possible it will work on other debian based distros, all bets are off. If you want to run it on something else, grab the src from github and make install.
It's kinda the view development took was, it should run anywhere, so why bother making a custom software distro. We compile it and officially support debian, but let debian handle the distro work, they are much better at it than we can be. AllStar is now no different than mariadb/etc, we just have software that runs on top of a distro.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Marco, I guess I probably 'assumed wrong' that you were NOT using the ASL RPI image. use these instructions from the readme This puts a hold on the kernel before updating. http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-... The image... http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ sorry for the assumption... ...mike/kb8jnm On 12/31/2018 4:14 PM, Mike wrote:
I am fairly sure your kernel is past where asl will support sound as per our current standard.
enhanced things | AllStar, Alsa & Pulseaudio without OSS <http://enhanced.github.io/2018/08/ASL_With_ALSA>
You may need to re-compile the dahdi module ??
Never done it so can't say more but it's a lead to work from.
...mike/kb8jnm
On 12/31/2018 2:52 PM, Marco Brunozzi wrote:
Hi, I tried...
Hi, I'm trying to install asl from sources on my bananapi: Linux bananapim2plus 4.14.84-sunxi #3 SMP Sat Dec 1 07:18:41 CET 2018 armv7l GNU/Linux
As explained here: https://wiki.allstarlink.org/wiki/ASL_FAQ
During the installation appear some errors here: /var/lib/dkms/asl-dahdi-linux/2.11.1/build/make.log
Especially this: make -C linux all make[1]: Entering directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux' make -C drivers/dahdi/firmware firmware-loaders make[2]: Entering directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi/firmware' make[2]: Leaving directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi/firmware' make -C /lib/modules/4.14.84-sunxi/build SUBDIRS=/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi DAHDI_INCLUDE=/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/include DAHDI_MODULES_EXTRA=" " HOTPLUG_FIRMWARE=yes modules DAHDI_BUILD_ALL=m make[2]: Entering directory '/usr/src/linux-headers-4.14.84-sunxi' Makefile:644: arch/-a: No such file or directory Makefile:644: armhf/Makefile: No such file or directory make[2]: *** No rule to make target 'armhf/Makefile'. Stop. make[2]: Leaving directory '/usr/src/linux-headers-4.14.84-sunxi' Makefile:74: recipe for target 'modules' failed make[1]: *** [modules] Error 2 make[1]: Leaving directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux' Makefile:9: recipe for target 'all' failed make: *** [all] Error 2
What can I do?
Thanks, Marco IW0RED ------- But no one answered. :-)
73 Marco IW0RED
On Mon, Dec 31, 2018 at 7:21 PM Bryan Fields<Bryan@bryanfields.net> wrote:
On 12/31/18 12:34 PM, Brian G wrote:
Yes,https://wiki.allstarlink.org/wiki/ASL_FAQ - See Q/A number 4 Much love on this new years eve for those who RTFM. <3
Note, this needs to be Debian 9. While it's certainly possible it will work on other debian based distros, all bets are off. If you want to run it on something else, grab the src from github and make install.
It's kinda the view development took was, it should run anywhere, so why bother making a custom software distro. We compile it and officially support debian, but let debian handle the distro work, they are much better at it than we can be. AllStar is now no different than mariadb/etc, we just have software that runs on top of a distro.
73's -- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (6)
-
ARS W5OMR -
Brian G -
Bryan Fields -
Corey -
Marco Brunozzi -
Mike