Re: [App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install
From: Neil k8it Sent: Monday, May 25, 2015 11:06 PM To: Justin Harris Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install yes you are correct dev is wlan0 kernel is 2.6.18-404.e15PAE on an i686 From: Justin Harris Sent: Monday, May 25, 2015 10:48 PM To: Neil k8it Cc: <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install Usually the interface name for wireless devices is wlan0, wlan1, etc. It isn't so much about the version of Linux as it is the Kernel version you are running and if it has native support for your hardware. As far as getting wireless working once you have the appropriate driver is called a "wireless connection manager". One that comes to mind is called wicd. Hope this helps a bit. Take care, Justin Harris KG7FKJ On May 25, 2015, at 7:28 PM, Neil k8it <k8it@cac.net> wrote: Well I figure if I report what I have learned someone may know an answer Centos v5.11 WIFI Intel NIC 52657LM here is a link to configuring it in Centos v5.11 http://linuxcommando.blogspot.com/2013/10/how-to-connect-to-wpawpa2-wifi-net... dev lan0 is currently not "UP" trying to follow the instructions to bring it "UP" results in a Firmware request failure which most likely means the driver is not present and needs to be loaded. so I'm searching for a linux driver for this intel 52657LM NIC anybody have one that will run under centos v5.11 thanks Neil k8it allstar node 41838 or echolink k8it-L From: Neil k8it Sent: Monday, May 25, 2015 3:41 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install I got ACID installed using a hardwire internet connection. Now I need to eliminate the hardwire connection and use the internal wireless NIC card in the pc box. I need to have the ssid and network password and gateway adddresses setup so when acid boots asterisk the network is logged into. how do I do this with acid / centos? thanks 73 Neil K8IT Allstar node 41838 or Echolink k8it-L ------------------------------------------------------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------------------------------------------------------ No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5941 / Virus Database: 4347/9865 - Release Date: 05/25/15 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5941 / Virus Database: 4347/9865 - Release Date: 05/25/15
I believe this inexpensive device in client mode will do what you want. It connects to your computer, then provides a wifi link to the ssid/password you pre select. http://www.amazon.com/TP-LINK-TL-WR702N-Wireless-Repeater-150Mbps/dp/B007PTCFFW/ref=sr_1_1?s=electronics&ie=UTF8&qid=1432658798&sr=1-1&keywords=wr702n http://www.tp-link.us/products/details/?categoryid=3143&model=TL-WR702N Thanks, Bob kk6ecm Sent from iPad
On May 25, 2015, at 8:09 PM, Neil k8it <k8it@cac.net> wrote:
From: Neil k8it Sent: Monday, May 25, 2015 11:06 PM To: Justin Harris Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install
yes you are correct dev is wlan0 kernel is 2.6.18-404.e15PAE on an i686
From: Justin Harris Sent: Monday, May 25, 2015 10:48 PM To: Neil k8it Cc: <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install
Usually the interface name for wireless devices is wlan0, wlan1, etc. It isn't so much about the version of Linux as it is the Kernel version you are running and if it has native support for your hardware. As far as getting wireless working once you have the appropriate driver is called a "wireless connection manager". One that comes to mind is called wicd. Hope this helps a bit.
Take care, Justin Harris KG7FKJ
On May 25, 2015, at 7:28 PM, Neil k8it <k8it@cac.net> wrote:
Well I figure if I report what I have learned someone may know an answer
Centos v5.11 WIFI Intel NIC 52657LM here is a link to configuring it in Centos v5.11 http://linuxcommando.blogspot.com/2013/10/how-to-connect-to-wpawpa2-wifi-net... dev lan0 is currently not "UP" trying to follow the instructions to bring it "UP" results in a Firmware request failure which most likely means the driver is not present and needs to be loaded. so I'm searching for a linux driver for this intel 52657LM NIC anybody have one that will run under centos v5.11
thanks Neil k8it allstar node 41838 or echolink k8it-L
From: Neil k8it Sent: Monday, May 25, 2015 3:41 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install
I got ACID installed using a hardwire internet connection. Now I need to eliminate the hardwire connection and use the internal wireless NIC card in the pc box. I need to have the ssid and network password and gateway adddresses setup so when acid boots asterisk the network is logged into. how do I do this with acid / centos? thanks 73 Neil K8IT Allstar node 41838 or Echolink k8it-L
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5941 / Virus Database: 4347/9865 - Release Date: 05/25/15
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5941 / Virus Database: 4347/9865 - Release Date: 05/25/15
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I use several WiFi routers in client mode (not all support it) for CISCO VoIP phones and Ethernet printers. On Tue, May 26, 2015, 19:59 kk6ecm <kk6ecm@gmail.com> wrote:
I believe this inexpensive device in client mode will do what you want. It connects to your computer, then provides a wifi link to the ssid/password you pre select.
http://www.tp-link.us/products/details/?categoryid=3143&model=TL-WR702N
Thanks, Bob kk6ecm
Sent from iPad
On May 25, 2015, at 8:09 PM, Neil k8it <k8it@cac.net> wrote:
*From:* Neil k8it <k8it@cac.net> *Sent:* Monday, May 25, 2015 11:06 PM *To:* Justin Harris <justin@suid.net> *Cc:* app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install
yes you are correct dev is wlan0 kernel is 2.6.18-404.e15PAE on an i686
*From:* Justin Harris <justin@suid.net> *Sent:* Monday, May 25, 2015 10:48 PM *To:* Neil k8it <k8it@cac.net> *Cc:* <app_rpt-users@ohnosec.org> <app_rpt-users@ohnosec.org%3E> *Subject:* Re: [App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install
Usually the interface name for wireless devices is wlan0, wlan1, etc. It isn't so much about the version of Linux as it is the Kernel version you are running and if it has native support for your hardware. As far as getting wireless working once you have the appropriate driver is called a "wireless connection manager". One that comes to mind is called wicd. Hope this helps a bit.
Take care, Justin Harris KG7FKJ
On May 25, 2015, at 7:28 PM, Neil k8it <k8it@cac.net> wrote:
Well I figure if I report what I have learned someone may know an answer
Centos v5.11 WIFI Intel NIC 52657LM here is a link to configuring it in Centos v5.11 http://linuxcommando.blogspot.com/2013/10/how-to-connect-to-wpawpa2-wifi-net... dev lan0 is currently not "UP" trying to follow the instructions to bring it "UP" results in a Firmware request failure which most likely means the driver is not present and needs to be loaded. so I'm searching for a linux driver for this intel 52657LM NIC anybody have one that will run under centos v5.11
thanks Neil k8it allstar node 41838 or echolink k8it-L
*From:* Neil k8it <k8it@cac.net> *Sent:* Monday, May 25, 2015 3:41 PM *To:* app_rpt-users@ohnosec.org *Subject:* [App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install
I got ACID installed using a hardwire internet connection. Now I need to eliminate the hardwire connection and use the internal wireless NIC card in the pc box. I need to have the ssid and network password and gateway adddresses setup so when acid boots asterisk the network is logged into. how do I do this with acid / centos? thanks 73 Neil K8IT Allstar node 41838 or Echolink k8it-L
------------------------------
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
------------------------------
No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5941 / Virus Database: 4347/9865 - Release Date: 05/25/15
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5941 / Virus Database: 4347/9865 - Release Date: 05/25/15
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Geoffrey Mendelson -
kk6ecm -
Neil k8it