Echolink not registering
An old revived node with Echolink is not registering, and I'm wondering what I missed. Have both TCP and UDP port forwarding set, echolink.conf same as before. Also, the echolink gains are properly set in rpt.conf. Then node ssh and Allstar linking all works properly with Putty and other nodes, respectively. Is there something else? I've been through the instructions several times (sigh!) Thanks, Bob k6ecm 73 Sent from iPad
Anything in the logs you can show us? echolink enabled in modules.conf? 73, Steve On 8/3/2017 8:55 AM, Bob Pyke wrote:
An old revived node with Echolink is not registering, and I'm wondering what I missed. Have both TCP and UDP port forwarding set, echolink.conf same as before. Also, the echolink gains are properly set in rpt.conf. Then node ssh and Allstar linking all works properly with Putty and other nodes, respectively. Is there something else? I've been through the instructions several times (sigh!)
Thanks, Bob k6ecm 73
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Aug 1 20:49:20] ERROR[699] chan_echolink.c: Unable to resolve echolink APRS server IP address Yes, echolink loaded in modules.conf Thanks, Bob k6ecm 73 Sent from iPad
On Aug 3, 2017, at 6:19 AM, Steve Zingman <szingman@msgstor.com> wrote:
Anything in the logs you can show us? echolink enabled in modules.conf?
73, Steve
On 8/3/2017 8:55 AM, Bob Pyke wrote: An old revived node with Echolink is not registering, and I'm wondering what I missed. Have both TCP and UDP port forwarding set, echolink.conf same as before. Also, the echolink gains are properly set in rpt.conf. Then node ssh and Allstar linking all works properly with Putty and other nodes, respectively. Is there something else? I've been through the instructions several times (sigh!)
Thanks, Bob k6ecm 73
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Someone more familiar with echolink may chime in. This looks interesting: Unable to resolve echolink APRS server IP address Can you post your echolink.conf? Steve On 8/3/2017 10:51 AM, Bob Pyke wrote:
Aug 1 20:49:20] ERROR[699] chan_echolink.c: Unable to resolve echolink APRS server IP address
Yes, echolink loaded in modules.conf
Thanks, Bob k6ecm 73
Sent from iPad
On Aug 3, 2017, at 6:19 AM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Anything in the logs you can show us? echolink enabled in modules.conf?
73, Steve
On 8/3/2017 8:55 AM, Bob Pyke wrote:
An old revived node with Echolink is not registering, and I'm wondering what I missed. Have both TCP and UDP port forwarding set, echolink.conf same as before. Also, the echolink gains are properly set in rpt.conf. Then node ssh and Allstar linking all works properly with Putty and other nodes, respectively. Is there something else? I've been through the instructions several times (sigh!)
Thanks, Bob k6ecm 73
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
If I remember, they kill users id's in echolink after a while if the logs do not show a recent login. Also there is a possibility they, like a lot of servers, have changed addy's Chuck K0XM On Thu, Aug 3, 2017 at 9:55 AM, Steve Zingman <szingman@msgstor.com> wrote:
Someone more familiar with echolink may chime in. This looks interesting: Unable to resolve echolink APRS server IP address Can you post your echolink.conf?
Steve
On 8/3/2017 10:51 AM, Bob Pyke wrote:
Aug 1 20:49:20] ERROR[699] chan_echolink.c: Unable to resolve echolink APRS server IP address
Yes, echolink loaded in modules.conf
Thanks, Bob k6ecm 73
Sent from iPad
On Aug 3, 2017, at 6:19 AM, Steve Zingman <szingman@msgstor.com> wrote:
Anything in the logs you can show us? echolink enabled in modules.conf?
73, Steve
On 8/3/2017 8:55 AM, Bob Pyke wrote:
An old revived node with Echolink is not registering, and I'm wondering what I missed. Have both TCP and UDP port forwarding set, echolink.conf same as before. Also, the echolink gains are properly set in rpt.conf. Then node ssh and Allstar linking all works properly with Putty and other nodes, respectively. Is there something else? I've been through the instructions several times (sigh!)
Thanks,
Bob
k6ecm
73
Sent from iPad
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing listApp_rpt-users@lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I can almost spell echolink, this works for me on DIAL <https://github.com/AllStarLink/DIAL/raw/master/configs/echolink.conf> On 8/3/2017 11:02 AM, Chuck Kraly wrote:
If I remember, they kill users id's in echolink after a while if the logs do not show a recent login. Also there is a possibility they, like a lot of servers, have changed addy's Chuck K0XM
On Thu, Aug 3, 2017 at 9:55 AM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Someone more familiar with echolink may chime in. This looks interesting: Unable to resolve echolink APRS server IP address Can you post your echolink.conf?
Steve
On 8/3/2017 10:51 AM, Bob Pyke wrote:
Aug 1 20:49:20] ERROR[699] chan_echolink.c: Unable to resolve echolink APRS server IP address
Yes, echolink loaded in modules.conf
Thanks, Bob k6ecm 73
Sent from iPad
On Aug 3, 2017, at 6:19 AM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Anything in the logs you can show us? echolink enabled in modules.conf?
73, Steve
On 8/3/2017 8:55 AM, Bob Pyke wrote:
An old revived node with Echolink is not registering, and I'm wondering what I missed. Have both TCP and UDP port forwarding set, echolink.conf same as before. Also, the echolink gains are properly set in rpt.conf. Then node ssh and Allstar linking all works properly with Putty and other nodes, respectively. Is there something else? I've been through the instructions several times (sigh!)
Thanks, Bob k6ecm 73
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Will take a look. The EchoLink.conf was working on the RPi till it died Monday. I don't get the APRS error, which occurs only on boot up. Thanks, Bob Sent from my iPhone
On Aug 3, 2017, at 8:06 AM, Steve Zingman <szingman@msgstor.com> wrote:
I can almost spell echolink, this works for me on DIAL <https://github.com/AllStarLink/DIAL/raw/master/configs/echolink.conf>
On 8/3/2017 11:02 AM, Chuck Kraly wrote: If I remember, they kill users id's in echolink after a while if the logs do not show a recent login. Also there is a possibility they, like a lot of servers, have changed addy's Chuck K0XM
On Thu, Aug 3, 2017 at 9:55 AM, Steve Zingman <szingman@msgstor.com> wrote:
Someone more familiar with echolink may chime in. This looks interesting: Unable to resolve echolink APRS server IP address Can you post your echolink.conf?
Steve
On 8/3/2017 10:51 AM, Bob Pyke wrote: Aug 1 20:49:20] ERROR[699] chan_echolink.c: Unable to resolve echolink APRS server IP address
Yes, echolink loaded in modules.conf
Thanks, Bob k6ecm 73
Sent from iPad
On Aug 3, 2017, at 6:19 AM, Steve Zingman <szingman@msgstor.com> wrote:
Anything in the logs you can show us? echolink enabled in modules.conf?
73, Steve
On 8/3/2017 8:55 AM, Bob Pyke wrote: An old revived node with Echolink is not registering, and I'm wondering what I missed. Have both TCP and UDP port forwarding set, echolink.conf same as before. Also, the echolink gains are properly set in rpt.conf. Then node ssh and Allstar linking all works properly with Putty and other nodes, respectively. Is there something else? I've been through the instructions several times (sigh!)
Thanks, Bob k6ecm 73
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Missed this before... [el0] confmode=no call=WA6YBN-R pwd=********* name=WA6YBN qth=Ridgecrest, CA email=k6ecm1@gmail.com maxstns=20 rtcptimeout=10 node=518309 recfile=/tmp/recorded.gsm astnode=27178 context=radio-secure lat=35.614163 lon=-117.684259 power=5 height=1 gain=3 dir=0 server1=nawest.echolink.org server2=nasouth.echolink.org server3=server1.echolink.org server4=server3.echolink.org #includeifexists custom/echolink.conf
n Thu, Aug 3, 2017 at 9:55 AM, Steve Zingman <szingman@msgstor.com> wrote: Someone more familiar with echolink may chime in. This looks interesting: Unable to resolve echolink APRS server IP address Can you post your echolink.conf?
Steve
On 8/3/2017 10:51 AM, Bob Pyke wrote: Aug 1 20:49:20] ERROR[699] chan_echolink.c: Unable to resolve echolink APRS server IP address
Yes, echolink loaded in modules.conf
Thanks, Bob k6ecm 73
Sent from iPad
On Aug 3, 2017, at 6:19 AM, Steve Zingman <szingman@msgstor.com> wrote:
Anything in the logs you can show us? echolink enabled in modules.conf?
73, Steve
On 8/3/2017 8:55 AM, Bob Pyke wrote: An old revived node with Echolink is not registering, and I'm wondering what I missed. Have both TCP and UDP port forwarding set, echolink.conf same as before. Also, the echolink gains are properly set in rpt.conf. Then node ssh and Allstar linking all works properly with Putty and other nodes, respectively. Is there something else? I've been through the instructions several times (sigh!)
Thanks, Bob k6ecm 73
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Looks like the APRS echolink address is hard coded into the channel driver. Can you run nslookup on aprs.echolink.org from your node? ahp = ast_gethostbyname(EL_APRS_SERVER,&ah); if (!ahp) { ast_log(LOG_ERROR, "Unable to resolve echolink APRS server IP address\n"); close(instp->ctrl_sock); instp->ctrl_sock = -1; close(instp->audio_sock); instp->audio_sock = -1; return -1; } #define EL_APRS_SERVER "aprs.echolink.org" Jim, K6JWN ________________________________________ From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of Bob Pyke <k6ecm1@gmail.com> Sent: Thursday, August 3, 2017 1:53 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Echolink not registering Missed this before... [el0] confmode=no call=WA6YBN-R pwd=********* name=WA6YBN qth=Ridgecrest, CA email=k6ecm1@gmail.com<mailto:email=k6ecm1@gmail.com> maxstns=20 rtcptimeout=10 node=518309 recfile=/tmp/recorded.gsm astnode=27178 context=radio-secure lat=35.614163 lon=-117.684259 power=5 height=1 gain=3 dir=0 server1=nawest.echolink.org<http://nawest.echolink.org> server2=nasouth.echolink.org<http://nasouth.echolink.org> server3=server1.echolink.org<http://server1.echolink.org> server4=server3.echolink.org<http://server3.echolink.org> #includeifexists custom/echolink.conf n Thu, Aug 3, 2017 at 9:55 AM, Steve Zingman <szingman@msgstor.com<mailto:szingman@msgstor.com>> wrote: Someone more familiar with echolink may chime in. This looks interesting: Unable to resolve echolink APRS server IP address Can you post your echolink.conf? Steve On 8/3/2017 10:51 AM, Bob Pyke wrote: Aug 1 20:49:20] ERROR[699] chan_echolink.c: Unable to resolve echolink APRS server IP address Yes, echolink loaded in modules.conf Thanks, Bob k6ecm 73 Sent from iPad On Aug 3, 2017, at 6:19 AM, Steve Zingman <szingman@msgstor.com<mailto:szingman@msgstor.com>> wrote: Anything in the logs you can show us? echolink enabled in modules.conf? 73, Steve On 8/3/2017 8:55 AM, Bob Pyke wrote: An old revived node with Echolink is not registering, and I'm wondering what I missed. Have both TCP and UDP port forwarding set, echolink.conf same as before. Also, the echolink gains are properly set in rpt.conf. Then node ssh and Allstar linking all works properly with Putty and other nodes, respectively. Is there something else? I've been through the instructions several times (sigh!) Thanks, Bob k6ecm 73 Sent from iPad _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
You beat me to it Jim, nice catch. Not that it will resolve the issue, but hard coding this is bad. This needs to be fixed. I'm adding this to the issues. 73, Steve On 08/03/2017 05:24 PM, Jim Nessen wrote:
Looks like the APRS echolink address is hard coded into the channel driver. Can you run nslookup on aprs.echolink.org from your node?
ahp = ast_gethostbyname(EL_APRS_SERVER,&ah); if (!ahp) { ast_log(LOG_ERROR, "Unable to resolve echolink APRS server IP address\n"); close(instp->ctrl_sock); instp->ctrl_sock = -1; close(instp->audio_sock); instp->audio_sock = -1; return -1; }
#define EL_APRS_SERVER "aprs.echolink.org"
Jim, K6JWN ________________________________________ From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of Bob Pyke <k6ecm1@gmail.com> Sent: Thursday, August 3, 2017 1:53 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Echolink not registering
Missed this before...
[el0]
confmode=no
call=WA6YBN-R
pwd=*********
name=WA6YBN
qth=Ridgecrest, CA
email=k6ecm1@gmail.com<mailto:email=k6ecm1@gmail.com>
maxstns=20
rtcptimeout=10
node=518309
recfile=/tmp/recorded.gsm
astnode=27178
context=radio-secure
lat=35.614163
lon=-117.684259
power=5
height=1
gain=3
dir=0
server1=nawest.echolink.org<http://nawest.echolink.org>
server2=nasouth.echolink.org<http://nasouth.echolink.org>
server3=server1.echolink.org<http://server1.echolink.org>
server4=server3.echolink.org<http://server3.echolink.org>
#includeifexists custom/echolink.conf
n Thu, Aug 3, 2017 at 9:55 AM, Steve Zingman <szingman@msgstor.com<mailto:szingman@msgstor.com>> wrote: Someone more familiar with echolink may chime in. This looks interesting: Unable to resolve echolink APRS server IP address Can you post your echolink.conf?
Steve
On 8/3/2017 10:51 AM, Bob Pyke wrote:
Aug 1 20:49:20] ERROR[699] chan_echolink.c: Unable to resolve echolink APRS server IP address
Yes, echolink loaded in modules.conf
Thanks, Bob k6ecm 73
Sent from iPad
On Aug 3, 2017, at 6:19 AM, Steve Zingman <szingman@msgstor.com<mailto:szingman@msgstor.com>> wrote:
Anything in the logs you can show us? echolink enabled in modules.conf?
73, Steve
On 8/3/2017 8:55 AM, Bob Pyke wrote: An old revived node with Echolink is not registering, and I'm wondering what I missed. Have both TCP and UDP port forwarding set, echolink.conf same as before. Also, the echolink gains are properly set in rpt.conf. Then node ssh and Allstar linking all works properly with Putty and other nodes, respectively. Is there something else? I've been through the instructions several times (sigh!)
Thanks, Bob k6ecm 73
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
root@WA6YBN:/# nslookup aprs.echolink.org Server: 192.168.0.1 Address: 192.168.0.1#53 Non-authoritative answer: Name: aprs.echolink.org Address: 54.161.182.37 root@WA6YBN:/# Sent from my iPhone
On Aug 3, 2017, at 2:24 PM, Jim Nessen <nessenj@jimsoffice.org> wrote:
Looks like the APRS echolink address is hard coded into the channel driver. Can you run nslookup on aprs.echolink.org from your node?
ahp = ast_gethostbyname(EL_APRS_SERVER,&ah); if (!ahp) { ast_log(LOG_ERROR, "Unable to resolve echolink APRS server IP address\n"); close(instp->ctrl_sock); instp->ctrl_sock = -1; close(instp->audio_sock); instp->audio_sock = -1; return -1; }
#define EL_APRS_SERVER "aprs.echolink.org"
Jim, K6JWN ________________________________________ From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of Bob Pyke <k6ecm1@gmail.com> Sent: Thursday, August 3, 2017 1:53 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Echolink not registering
Missed this before...
[el0]
confmode=no
call=WA6YBN-R
pwd=*********
name=WA6YBN
qth=Ridgecrest, CA
email=k6ecm1@gmail.com<mailto:email=k6ecm1@gmail.com>
maxstns=20
rtcptimeout=10
node=518309
recfile=/tmp/recorded.gsm
astnode=27178
context=radio-secure
lat=35.614163
lon=-117.684259
power=5
height=1
gain=3
dir=0
server1=nawest.echolink.org<http://nawest.echolink.org>
server2=nasouth.echolink.org<http://nasouth.echolink.org>
server3=server1.echolink.org<http://server1.echolink.org>
server4=server3.echolink.org<http://server3.echolink.org>
#includeifexists custom/echolink.conf
n Thu, Aug 3, 2017 at 9:55 AM, Steve Zingman <szingman@msgstor.com<mailto:szingman@msgstor.com>> wrote: Someone more familiar with echolink may chime in. This looks interesting: Unable to resolve echolink APRS server IP address Can you post your echolink.conf?
Steve
On 8/3/2017 10:51 AM, Bob Pyke wrote:
Aug 1 20:49:20] ERROR[699] chan_echolink.c: Unable to resolve echolink APRS server IP address
Yes, echolink loaded in modules.conf
Thanks, Bob k6ecm 73
Sent from iPad
On Aug 3, 2017, at 6:19 AM, Steve Zingman <szingman@msgstor.com<mailto:szingman@msgstor.com>> wrote:
Anything in the logs you can show us? echolink enabled in modules.conf?
73, Steve
On 8/3/2017 8:55 AM, Bob Pyke wrote: An old revived node with Echolink is not registering, and I'm wondering what I missed. Have both TCP and UDP port forwarding set, echolink.conf same as before. Also, the echolink gains are properly set in rpt.conf. Then node ssh and Allstar linking all works properly with Putty and other nodes, respectively. Is there something else? I've been through the instructions several times (sigh!)
Thanks, Bob k6ecm 73
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org<mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
P.S. OS Original DIAL on a mini-ITX Thanks, Bob k6ecm 73 Sent from iPad
On Aug 3, 2017, at 5:55 AM, Bob Pyke <k6ecm1@gmail.com> wrote:
An old revived node with Echolink is not registering, and I'm wondering what I missed. Have both TCP and UDP port forwarding set, echolink.conf same as before. Also, the echolink gains are properly set in rpt.conf. Then node ssh and Allstar linking all works properly with Putty and other nodes, respectively. Is there something else? I've been through the instructions several times (sigh!)
Thanks, Bob k6ecm 73
Sent from iPad
participants (4)
-
Bob Pyke -
Chuck Kraly -
Jim Nessen -
Steve Zingman