Aug 1 20:49:20] ERROR[699] chan_echolink.c: Unable to resolve echolink APRS server IP address Yes, echolink loaded in modules.conf Thanks, Bob k6ecm 73 Sent from iPad
On Aug 3, 2017, at 6:19 AM, Steve Zingman <szingman@msgstor.com> wrote:
Anything in the logs you can show us? echolink enabled in modules.conf?
73, Steve
On 8/3/2017 8:55 AM, Bob Pyke wrote: An old revived node with Echolink is not registering, and I'm wondering what I missed. Have both TCP and UDP port forwarding set, echolink.conf same as before. Also, the echolink gains are properly set in rpt.conf. Then node ssh and Allstar linking all works properly with Putty and other nodes, respectively. Is there something else? I've been through the instructions several times (sigh!)
Thanks, Bob k6ecm 73
Sent from iPad
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.