Trying to get weather stuff running on a new RPi and it isn't flying. I have chased it to the Google side. The snippets of words get sent to google translator, and mp3 files come back, and the script sticks all the files together in order. But the routine fails in lame conversion. I have taken other mp3's and lame converts them fine. When I try to run either the assembled mp3 or one of the individual mp3 files I get header error on them. Also noted that the individual files, maybe 50-80 of them are only about 400 bytes long and after cat puts them together the file is maybe 50k, which sounds wrong. I didn't do anything to this stuff, just using what was in Doug's Raspberry Pi distro, which otherwise works great. Anybody have any suggestions on this conversion? I see older versions of w0anm's scripts do not sent the text to Google for conversion but instead use one of two applications to convert them. Guessing the choice to move it off the pi was based on processor horsepower. GeorgeC W2DB 2360
Bet they aren't really MP3's. No idea what they really are though. -- Buddy Brannan, KB5ELV - Erie, PA Phone: 814-860-3194 Mobile: 814-431-0962 Email: buddy@brannan.name
On Sep 5, 2015, at 8:40 PM, George Csahanin <george@dyb.com> wrote:
Trying to get weather stuff running on a new RPi and it isn't flying. I have chased it to the Google side. The snippets of words get sent to google translator, and mp3 files come back, and the script sticks all the files together in order. But the routine fails in lame conversion. I have taken other mp3's and lame converts them fine. When I try to run either the assembled mp3 or one of the individual mp3 files I get header error on them. Also noted that the individual files, maybe 50-80 of them are only about 400 bytes long and after cat puts them together the file is maybe 50k, which sounds wrong. I didn't do anything to this stuff, just using what was in Doug's Raspberry Pi distro, which otherwise works great.
Anybody have any suggestions on this conversion? I see older versions of w0anm's scripts do not sent the text to Google for conversion but instead use one of two applications to convert them. Guessing the choice to move it off the pi was based on processor horsepower.
GeorgeC W2DB 2360 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Check the lame output options, especially for header type/format. ...mike/kb8jnm
Trying to get weather stuff running on a new RPi and it isn't flying. I have chased it to the Google side. The snippets of words get sent to google translator, and mp3 files come back, and the script sticks all the files together in order. But the routine fails in lame conversion. I have taken other mp3's and lame converts them fine. When I try to run either the assembled mp3 or one of the individual mp3 files I get header error on them. Also noted that the individual files, maybe 50-80 of them are only about 400 bytes long and after cat puts them together the file is maybe 50k, which sounds wrong. I didn't do anything to this stuff, just using what was in Doug's Raspberry Pi distro, which otherwise works great.
Anybody have any suggestions on this conversion? I see older versions of w0anm's scripts do not sent the text to Google for conversion but instead use one of two applications to convert them. Guessing the choice to move it off the pi was based on processor horsepower.
GeorgeC W2DB 2360 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
The current configuration of Google text to speech is NO longer functional on the hamvoip.org RPi2 or BBB versions. Google has changed their terms of service and they are no longer allowing unlimited access to the site. There is a work around but access will still be limited. We will not support Google TTS for weather scripts in the future. We are woking on an alternative tts. All this was discussed at length on the arm-allstar list which you should be part of f you are using BBB or RPi2 from hamvoip.org. Questions should be asked there. 73 Doug WA3DSP http://www.crompton.com/hamradio
Date: Sat, 5 Sep 2015 19:40:21 -0500 From: george@dyb.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] text to speech /google_tts
Trying to get weather stuff running on a new RPi and it isn't flying. I have chased it to the Google side. The snippets of words get sent to google translator, and mp3 files come back, and the script sticks all the files together in order. But the routine fails in lame conversion. I have taken other mp3's and lame converts them fine. When I try to run either the assembled mp3 or one of the individual mp3 files I get header error on them. Also noted that the individual files, maybe 50-80 of them are only about 400 bytes long and after cat puts them together the file is maybe 50k, which sounds wrong. I didn't do anything to this stuff, just using what was in Doug's Raspberry Pi distro, which otherwise works great.
Anybody have any suggestions on this conversion? I see older versions of w0anm's scripts do not sent the text to Google for conversion but instead use one of two applications to convert them. Guessing the choice to move it off the pi was based on processor horsepower.
GeorgeC W2DB 2360 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Question: Are you using a local weather machine or are you downloading the text from an online weather service? David On Sat, Sep 5, 2015 at 7:12 PM, Doug Crompton <doug@crompton.com> wrote:
The current configuration of Google text to speech is NO longer functional on the hamvoip.org RPi2 or BBB versions. Google has changed their terms of service and they are no longer allowing unlimited access to the site. There is a work around but access will still be limited. We will not support Google TTS for weather scripts in the future. We are woking on an alternative tts. All this was discussed at length on the arm-allstar list which you should be part of f you are using BBB or RPi2 from hamvoip.org. Questions should be asked there.
*73 DougWA3DSPhttp://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
Date: Sat, 5 Sep 2015 19:40:21 -0500 From: george@dyb.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] text to speech /google_tts
Trying to get weather stuff running on a new RPi and it isn't flying. I have chased it to the Google side. The snippets of words get sent to google translator, and mp3 files come back, and the script sticks all the files together in order. But the routine fails in lame conversion. I have taken other mp3's and lame converts them fine. When I try to run either the assembled mp3 or one of the individual mp3 files I get header error on them. Also noted that the individual files, maybe 50-80 of them are only about 400 bytes long and after cat puts them together the file is maybe 50k, which sounds wrong. I didn't do anything to this stuff, just using what was in Doug's Raspberry Pi distro, which otherwise works great.
Anybody have any suggestions on this conversion? I see older versions of w0anm's scripts do not sent the text to Google for conversion but instead use one of two applications to convert them. Guessing the choice to move it off the pi was based on processor horsepower.
GeorgeC W2DB 2360 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (5)
-
Buddy Brannan -
David KE6UPI -
Doug Crompton -
George Csahanin -
mike＠midnighteng.com