Hi Tim WD6AWP, Nodes are registering without any issues. Right now node # 60660 is active on the system. But still can connect to any HUB 73' KP4AP ________________________________ From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of app_rpt-users-request@lists.allstarlink.org <app_rpt-users-request@lists.allstarlink.org> Sent: Sunday, May 13, 2018 12:00 PM To: app_rpt-users@lists.allstarlink.org Subject: App_rpt-users Digest, Vol 111, Issue 9 Send App_rpt-users mailing list submissions to app_rpt-users@lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users App_rpt-users Info Page - lists.allstarlink.org<http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> lists.allstarlink.org Your email address: Your name (optional): You may enter a privacy password below. This provides only mild security, but should prevent others from messing with your subscription. or, via email, send a message with subject or body 'help' to app_rpt-users-request@lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner@lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. Re: Failed Connections (k7ilo1@gmail.com) 2. Voice ID Audio Nodes List (Mike) 3. Re: Failed Connections (Mike) 4. Re: Voice ID Audio Nodes List (Bryan Fields) 5. Re: Failed Connections (k7ilo1@gmail.com) 6. Re: Voice ID Audio Nodes List (Mike) 7. Re: Failed Connections (k7ilo1@gmail.com) 8. New ASL v 1.0.1 not connecting to any HUB or Node (Alberto Enrique Puig) 9. Re: New ASL v 1.0.1 not connecting to any HUB or Node (Tim Sawyer) ---------------------------------------------------------------------- Message: 1 Date: Sat, 12 May 2018 09:45:58 -0700 From: <k7ilo1@gmail.com> To: "'Users of Asterisk app_rpt'" <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Failed Connections Message-ID: <004201d3ea10$b4b5dc70$1e219550$@gmail.com> Content-Type: text/plain; charset="utf-8" Sorry gang for not getting back sooner but what I did find is that I could not ping anything except for local ip address’s with my router as the dns server So I changed it to Google’s quad 8’s and I was able to ping things on the internet but was still not able to connect to anything. But today, I decided just to check because sometimes it takes time for dns records to populate and low-and-behold, I was able to connect to nodes now. What was funny is, after the online nodes portal was re-instated, I was showing in the online nodes list but couldn’t go anywhere. Oh well, its working now. Thanks all Harold K7ILO Node: 27863 From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, May 7, 2018 10:05 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Failed Connections Giving this some more thought... (what was I thinking... or not) I guess I skipped over the fact you may not have a internet connection at all. Probably the first check anyway. Try something from a command line first to check it. Reboot router/computer and check again / check dns at node. ...mike/kb8jnm On 5/7/2018 11:27 AM, Mike wrote: start with the DTMF. listen to the readback of the failed connect. or Watch the console output but before you make any changes to the system, reboot it. If nothing has changed with your config than adjusting something is the wrong solution. The chances of something having gone wrong in memory is a bit higher in a rf environment and a reboot often will flush that out. If it does, you need to look at bad memory and/or rf getting on your wiring. But other possibilities exist. ...mike/kb8jnm On 5/6/2018 3:06 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> wrote: Yes its been some time since I’ve monitored the emails because I’ve had way too many to try to read through them but…. I have a question to probably a common problem and easy fix. I am using the Dial distro of allstar which has been working great up to some point. So today I decided to fire up the old HT and dial up a node for some traffic to listen to. Connection failed is what I’m getting. No matter what node I try to dial up I get, Connection failed. All of my config files look ok and I have not done any changes to either my allstar node or my port forwarding on my router. Where might I start to find and resolve my issue. Thanks gang Harold K7ILO Node 27863 _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Alberto, So the problem is that 60660 in not a node number that can be registered on the system. You have to request a node number at allstarlink.org. Create an account there if you don't already have one, create a server and then request a node. On Sun, May 13, 2018 at 2:00 PM, Alberto Enrique Puig < alberto_e_puig@hotmail.com> wrote:
Hi Tim WD6AWP,
Nodes are registering without any issues. Right now node # 60660 is active on the system. But still can connect to any HUB
73' KP4AP
------------------------------ *From:* App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of app_rpt-users-request@lists.allstarlink.org < app_rpt-users-request@lists.allstarlink.org> *Sent:* Sunday, May 13, 2018 12:00 PM *To:* app_rpt-users@lists.allstarlink.org *Subject:* App_rpt-users Digest, Vol 111, Issue 9
Send App_rpt-users mailing list submissions to app_rpt-users@lists.allstarlink.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ rpt-users App_rpt-users Info Page - lists.allstarlink.org <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> lists.allstarlink.org Your email address: Your name (optional): You may enter a privacy password below. This provides only mild security, but should prevent others from messing with your subscription.
or, via email, send a message with subject or body 'help' to app_rpt-users-request@lists.allstarlink.org
You can reach the person managing the list at app_rpt-users-owner@lists.allstarlink.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
This site is dedicated to the memory of Jim Dixon WB6NIL
Today's Topics:
1. Re: Failed Connections (k7ilo1@gmail.com) 2. Voice ID Audio Nodes List (Mike) 3. Re: Failed Connections (Mike) 4. Re: Voice ID Audio Nodes List (Bryan Fields) 5. Re: Failed Connections (k7ilo1@gmail.com) 6. Re: Voice ID Audio Nodes List (Mike) 7. Re: Failed Connections (k7ilo1@gmail.com) 8. New ASL v 1.0.1 not connecting to any HUB or Node (Alberto Enrique Puig) 9. Re: New ASL v 1.0.1 not connecting to any HUB or Node (Tim Sawyer)
----------------------------------------------------------------------
Message: 1 Date: Sat, 12 May 2018 09:45:58 -0700 From: <k7ilo1@gmail.com> To: "'Users of Asterisk app_rpt'" <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Failed Connections Message-ID: <004201d3ea10$b4b5dc70$1e219550$@gmail.com> Content-Type: text/plain; charset="utf-8"
Sorry gang for not getting back sooner but what I did find is that I could not ping anything except for local ip address’s with my router as the dns server
So I changed it to Google’s quad 8’s and I was able to ping things on the internet but was still not able to connect to anything.
But today, I decided just to check because sometimes it takes time for dns records to populate and low-and-behold, I was able to connect to nodes now.
What was funny is, after the online nodes portal was re-instated, I was showing in the online nodes list but couldn’t go anywhere.
Oh well, its working now.
Thanks all
Harold
K7ILO
Node: 27863
From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, May 7, 2018 10:05 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Failed Connections
Giving this some more thought... (what was I thinking... or not)
I guess I skipped over the fact you may not have a internet connection at all.
Probably the first check anyway. Try something from a command line first to check it.
Reboot router/computer and check again / check dns at node.
...mike/kb8jnm
On 5/7/2018 11:27 AM, Mike wrote:
start with the DTMF.
listen to the readback of the failed connect. or Watch the console output
but before you make any changes to the system, reboot it.
If nothing has changed with your config than adjusting something is the wrong solution.
The chances of something having gone wrong in memory is a bit higher in a rf environment and a reboot often will flush that out. If it does, you need to look at bad memory and/or rf getting on your wiring.
But other possibilities exist.
...mike/kb8jnm
On 5/6/2018 3:06 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com <k7ilo1@gmail.com>> wrote:
Yes its been some time since I’ve monitored the emails because I’ve had way too many to try to read through them but….
I have a question to probably a common problem and easy fix.
I am using the Dial distro of allstar which has been working great up to some point.
So today I decided to fire up the old HT and dial up a node for some traffic to listen to.
Connection failed is what I’m getting.
No matter what node I try to dial up I get, Connection failed.
All of my config files look ok and I have not done any changes to either my allstar node or my port forwarding on my router.
Where might I start to find and resolve my issue.
Thanks gang
Harold
K7ILO
Node 27863
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists. allstarlink.org <App_rpt-users@lists.allstarlink.org>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists. allstarlink.org <App_rpt-users@lists.allstarlink.org>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Alberto, I think you meant node 40660, not 60660?? The problem appears to be that your IP address is constantly flapping between 2 or more public addresses: 166.172.188.87 and 179.52.49.89. root@AllStar-DNS:/tmp# cat /tmp/rpt_extnodes-dns| grep 40660 40660=radio@166.172.188.87:4569/40660,166.172.188.87 root@AllStar-DNS:/tmp# cat /tmp/rpt_extnodes-dns| grep 40660 40660=radio@179.52.49.89:4569/40660,179.52.49.89 Are you using a mobile Internet provider? 73, David KB4FXC On Sun, 13 May 2018, Tim Sawyer wrote:
Alberto,
So the problem is that 60660 in not a node number that can be registered on the system. You have to request a node number at allstarlink.org. Create an account there if you don't already have one, create a server and then request a node.
On Sun, May 13, 2018 at 2:00 PM, Alberto Enrique Puig < alberto_e_puig@hotmail.com> wrote:
Hi Tim WD6AWP,
Nodes are registering without any issues. Right now node # 60660 is active on the system. But still can connect to any HUB
73' KP4AP
------------------------------ *From:* App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of app_rpt-users-request@lists.allstarlink.org < app_rpt-users-request@lists.allstarlink.org> *Sent:* Sunday, May 13, 2018 12:00 PM *To:* app_rpt-users@lists.allstarlink.org *Subject:* App_rpt-users Digest, Vol 111, Issue 9
Send App_rpt-users mailing list submissions to app_rpt-users@lists.allstarlink.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ rpt-users App_rpt-users Info Page - lists.allstarlink.org <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> lists.allstarlink.org Your email address: Your name (optional): You may enter a privacy password below. This provides only mild security, but should prevent others from messing with your subscription.
or, via email, send a message with subject or body 'help' to app_rpt-users-request@lists.allstarlink.org
You can reach the person managing the list at app_rpt-users-owner@lists.allstarlink.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
This site is dedicated to the memory of Jim Dixon WB6NIL
Today's Topics:
1. Re: Failed Connections (k7ilo1@gmail.com) 2. Voice ID Audio Nodes List (Mike) 3. Re: Failed Connections (Mike) 4. Re: Voice ID Audio Nodes List (Bryan Fields) 5. Re: Failed Connections (k7ilo1@gmail.com) 6. Re: Voice ID Audio Nodes List (Mike) 7. Re: Failed Connections (k7ilo1@gmail.com) 8. New ASL v 1.0.1 not connecting to any HUB or Node (Alberto Enrique Puig) 9. Re: New ASL v 1.0.1 not connecting to any HUB or Node (Tim Sawyer)
----------------------------------------------------------------------
Message: 1 Date: Sat, 12 May 2018 09:45:58 -0700 From: <k7ilo1@gmail.com> To: "'Users of Asterisk app_rpt'" <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Failed Connections Message-ID: <004201d3ea10$b4b5dc70$1e219550$@gmail.com> Content-Type: text/plain; charset="utf-8"
Sorry gang for not getting back sooner but what I did find is that I could not ping anything except for local ip addressâs with my router as the dns server
So I changed it to Googleâs quad 8âs and I was able to ping things on the internet but was still not able to connect to anything.
But today, I decided just to check because sometimes it takes time for dns records to populate and low-and-behold, I was able to connect to nodes now.
What was funny is, after the online nodes portal was re-instated, I was showing in the online nodes list but couldnât go anywhere.
Oh well, its working now.
Thanks all
Harold
K7ILO
Node: 27863
From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, May 7, 2018 10:05 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Failed Connections
Giving this some more thought... (what was I thinking... or not)
I guess I skipped over the fact you may not have a internet connection at all.
Probably the first check anyway. Try something from a command line first to check it.
Reboot router/computer and check again / check dns at node.
...mike/kb8jnm
On 5/7/2018 11:27 AM, Mike wrote:
start with the DTMF.
listen to the readback of the failed connect. or Watch the console output
but before you make any changes to the system, reboot it.
If nothing has changed with your config than adjusting something is the wrong solution.
The chances of something having gone wrong in memory is a bit higher in a rf environment and a reboot often will flush that out. If it does, you need to look at bad memory and/or rf getting on your wiring.
But other possibilities exist.
...mike/kb8jnm
On 5/6/2018 3:06 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com <k7ilo1@gmail.com>> wrote:
Yes its been some time since Iâve monitored the emails because Iâve had way too many to try to read through them butâ¦.
I have a question to probably a common problem and easy fix.
I am using the Dial distro of allstar which has been working great up to some point.
So today I decided to fire up the old HT and dial up a node for some traffic to listen to.
Connection failed is what Iâm getting.
No matter what node I try to dial up I get, Connection failed.
All of my config files look ok and I have not done any changes to either my allstar node or my port forwarding on my router.
Where might I start to find and resolve my issue.
Thanks gang
Harold
K7ILO
Node 27863
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists. allstarlink.org <App_rpt-users@lists.allstarlink.org>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists. allstarlink.org <App_rpt-users@lists.allstarlink.org>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Alberto Enrique Puig -
David McGough -
Tim Sawyer