Re: [App_rpt-users] New server not starting asterisk relabily
I have retested on a HP DC6000 and it seems reliable so far and the issue is mostly not there. When first starting the computer 2 things happen Most of the URI's show the following message immediately after boot then they stop. Could this be normal and / or nothing to worry about as it only seems to happen on a reboot? [Sep 29 07:46:00] WARNING[1212]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43826][Sep 29 07:46:00] WARNING[1212]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43826] wasn't stuck after all. Secondly after re-downloading the configuration from the AllStar web site sometimes 2 of the URI's reverse their node assignments, and after several reboots they reverse again. what can i do to prevent this? thank you Chris From: C B <harvard5362@yahoo.com> To: "szingman@msgstor.com" <szingman@msgstor.com> Sent: Saturday, September 24, 2016 9:01 AM Subject: Re: [App_rpt-users] New server not starting asterisk relabily Hi thank you for the link to a different installer. 64 bit was used however i have the same result as there are several of this model taken out of service (and in the recycle pile, only reason taken out of service i was told is that they are upgrading all I3s) i can get another on Monday to try if you think it could be a hardware failure. Or i can try anything you wish if you have another idea. I am building to to replace a failing RLC DSP 404 and the site will be inaccessible for several months once winter hits thus i am attempting to test for reliability a little more than usual before deploying. Thank you very much for the help Chris From: Steve Zingman <szingman@msgstor.com> To: C B <harvard5362@yahoo.com> Sent: Saturday, September 24, 2016 6:43 AM Subject: Re: [App_rpt-users] New server not starting asterisk relabily Give this installer a try. <http://tinyurl.com/amd64-i386-DIAL-RC1> On 09/24/2016 09:33 AM, C B wrote: cannot submit urb 0, error -28 not enough bandwidth -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Chris, I am looking into this. Thanks, Steve On 9/29/2016 10:51 AM, C B wrote:
I have retested on a HP DC6000 and it seems reliable so far and the issue is mostly not there.
When first starting the computer 2 things happen
Most of the URI's show the following message immediately after boot then they stop. Could this be normal and / or nothing to worry about as it only seems to happen on a reboot?
[Sep 29 07:46:00] WARNING[1212]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43826] [Sep 29 07:46:00] WARNING[1212]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43826] wasn't stuck after all.
Secondly after re-downloading the configuration from the AllStar web site sometimes 2 of the URI's reverse their node assignments, and after several reboots they reverse again. what can i do to prevent this?
thank you
Chris
------------------------------------------------------------------------ *From:* C B <harvard5362@yahoo.com> *To:* "szingman@msgstor.com" <szingman@msgstor.com> *Sent:* Saturday, September 24, 2016 9:01 AM *Subject:* Re: [App_rpt-users] New server not starting asterisk relabily
Hi
thank you for the link to a different installer.
64 bit was used however i have the same result
as there are several of this model taken out of service (and in the recycle pile, only reason taken out of service i was told is that they are upgrading all I3s) i can get another on Monday to try if you think it could be a hardware failure.
Or i can try anything you wish if you have another idea.
I am building to to replace a failing RLC DSP 404 and the site will be inaccessible for several months once winter hits thus i am attempting to test for reliability a little more than usual before deploying.
Thank you very much for the help
Chris
------------------------------------------------------------------------ *From:* Steve Zingman <szingman@msgstor.com> *To:* C B <harvard5362@yahoo.com> *Sent:* Saturday, September 24, 2016 6:43 AM *Subject:* Re: [App_rpt-users] New server not starting asterisk relabily
Give this installer a try. <http://tinyurl.com/amd64-i386-DIAL-RC1> <http://tinyurl.com/amd64-i386-DIAL-RC1>
On 09/24/2016 09:33 AM, C B wrote:
cannot submit urb 0, error -28 not enough bandwidth
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Just say no to world domination"
Steve Any luck i am still having the issues Chris From: Steve Zingman <szingman@msgstor.com> To: C B <harvard5362@yahoo.com>; "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Sent: Thursday, September 29, 2016 7:56 AM Subject: Re: [App_rpt-users] New server not starting asterisk relabily Chris, I am looking into this. Thanks, Steve On 9/29/2016 10:51 AM, C B wrote:
I have retested on a HP DC6000 and it seems reliable so far and the issue is mostly not there.
When first starting the computer 2 things happen
Most of the URI's show the following message immediately after boot then they stop. Could this be normal and / or nothing to worry about as it only seems to happen on a reboot?
[Sep 29 07:46:00] WARNING[1212]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43826] [Sep 29 07:46:00] WARNING[1212]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43826] wasn't stuck after all.
Secondly after re-downloading the configuration from the AllStar web site sometimes 2 of the URI's reverse their node assignments, and after several reboots they reverse again. what can i do to prevent this?
thank you
Chris
------------------------------------------------------------------------ *From:* C B <harvard5362@yahoo.com> *To:* "szingman@msgstor.com" <szingman@msgstor.com> *Sent:* Saturday, September 24, 2016 9:01 AM *Subject:* Re: [App_rpt-users] New server not starting asterisk relabily
Hi
thank you for the link to a different installer.
64 bit was used however i have the same result
as there are several of this model taken out of service (and in the recycle pile, only reason taken out of service i was told is that they are upgrading all I3s) i can get another on Monday to try if you think it could be a hardware failure.
Or i can try anything you wish if you have another idea.
I am building to to replace a failing RLC DSP 404 and the site will be inaccessible for several months once winter hits thus i am attempting to test for reliability a little more than usual before deploying.
Thank you very much for the help
Chris
------------------------------------------------------------------------ *From:* Steve Zingman <szingman@msgstor.com> *To:* C B <harvard5362@yahoo.com> *Sent:* Saturday, September 24, 2016 6:43 AM *Subject:* Re: [App_rpt-users] New server not starting asterisk relabily
Give this installer a try. <http://tinyurl.com/amd64-i386-DIAL-RC1> <http://tinyurl.com/amd64-i386-DIAL-RC1>
On 09/24/2016 09:33 AM, C B wrote:
cannot submit urb 0, error -28 not enough bandwidth
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Just say no to world domination"
participants (2)
-
C B -
Steve Zingman