I think duplex=2 is the default but you should enter it in rpt.conf to make sure and always if you need a different value. http://ohnosec.org/drupal/node/84 73 Doug WA3DSP http://www.crompton.com/hamradio From: kk6ecm@gmail.com To: app_rpt-users@ohnosec.org Date: Sun, 16 Mar 2014 19:18:01 -0700 Subject: [App_rpt-users] rpt.conf duplex= The node stanza in rpt.conf does not have a “duplex=2” statement for our repeater. How is it operating without “duplex=2” for our full duplex repeater? Also, the operator can hear his/her final words just after releasing PTT. I’m not sure why it is working with out “duplex=2” Should I add “duplex=3” so we don’t hear the last part of our own transmission? Thanks, Bob kk6ecm _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.