On Tue, Dec 16, 2014 at 10:41 AM, <app_rpt-users-request@ohnosec.org> wrote:

Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org

You can reach the person managing the list at app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."

Today's Topics:

1. Re: Show link topology from cli? (Salik Satti) 2. Best way to link multiple nodes (Mike M)

----------------------------------------------------------------------

Message: 1 Date: Tue, 16 Dec 2014 06:50:00 +0000 (UTC) From: Salik Satti <saliksatti@yahoo.com> To: Doug Crompton <doug@crompton.com>, k5tra <k5tra@austin.rr.com> Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Show link topology from cli? Message-ID: < 1694251193.421724.1418712600196.JavaMail.yahoo@jws10027.mail.ne1.yahoo.com

...

Content-Type: text/plain; charset="utf-8"

Hi Doug,???????? I have setup a DMK Uri to work with XIPAR. And from asterisk cli when i issue radio tune command like: radio tune rxnoise or rxvoiceit says:Done tries=12, Setting=5.000000, meas=505.000000ERROR: RX VOICE GAIN ADJUST FAILED. can you please help me in this regard, what i am doing wrong? Regards, Salik Mumtaz Satti, Assistant Exective Engineer National Radio And Telecommunication Corporation, Haripur kpk Pakistan www.nrtc.com.pk salik.satti@nrtc.com.pk Contact: +923155414048 Skype: salik.satti6 ​​

​​ ​It ​should have said more behind FAILED. Such as insufficient level.. There is either not enough, to much, or no audio detected. Did you inject the proper tone to adjust the voice level. If your using discriminator audio you must read radio tune rxnoise first, so the software can see a base line noise level with no signal present. Using discriminator audio the software is seeing a constant signal.

On Monday, December 15, 2014 12:23 PM, Salik Satti < saliksatti@yahoo.com> wrote:

Hi Doug,???????? I have setup a DMK Uri to work with XIPAR. And from asterisk cli when i issue radio tune command like: radio tune rxnoise or rxvoiceit says:Done tries=12, Setting=5.000000, meas=505.000000ERROR: RX VOICE GAIN ADJUST FAILED. ?Salik Mumtaz Satti, Assistant Exective Engineer National Radio And Telecommunication Corporation, Haripur kpk Pakistan www.nrtc.com.pk salik.satti@nrtc.com.pk Contact: +923155414048 Skype: salik.satti6

On Wednesday, November 19, 2014 11:12 AM, Salik Satti < saliksatti@yahoo.com> wrote:

Hi why do i need to connect my node with allstar or echolink i just want to set it up locally. how to set all this totally locally between two nodes. Regards, ?Salik Mumtaz Satti, A-EXEN National Radio And Telecommunication Corporation, Haripur Pakistan www.nrtc.com.pk salik.satti@nrtc.com.pk Contact: +923155414048 Skype: salik.satti6

On Monday, November 17, 2014 11:27 PM, Doug Crompton < doug@crompton.com> wrote:

#yiv0433681204 --.yiv0433681204hmmessage P{margin:0px;padding:0px;}#yiv0433681204 body.yiv0433681204hmmessage{font-size:12pt;font-family:Calibri;}#yiv0433681204 That is certainly a way to do it. Here is another option that doesn't mess with the CLI. The 'archivedir' command in rpt.conf creates dated text files of all node activity. Unfortunately it also saves wav files of all of the audio. This is not a problem on a large disk based system but on the BBB it would just not work. So new in the BBB code is a command called 'archiveaudio' which was created to turn off the saving of the audio portion of the archive thus greatly reducing the storage load. I am not sure if this command has made its way to Acid. If you do use this on the BBB make sure you archive to a tmpfs like /tmp and also delete past files periodically because even they get large depending on you nodes activity. 'archivedir' saves based on date, creating one file per calendar day.

Example of using command in rpt.conf:

[27225] rxchannel = SimpleUSB/usb duplex=1 erxgain=-3 etxgain=3 archivedir=/var/log/asterisk/audio archiveaudio=0????????? ; Disable saving .wav files

This creates a directory under the archivedir path of the node number.? Multiple archives can be stored if you put these commands in each node stanza. This listing shows files dating back to July 31 of all node activity. This is an Acid system modified to not save audio files.

[root@WA3DSP_Allstar asterisk]# cd /var/log/asterisk/audio/27225/ [root@WA3DSP_Allstar 27225]# ls 20140731.txt? 20140815.txt? 20140830.txt? 20140914.txt? 20140929.txt? 20141014.txt? 20141029.txt? 20141113.txt 20140801.txt? 20140816.txt? 20140831.txt? 20140915.txt? 20140930.txt? 20141015.txt? 20141030.txt? 20141114.txt 20140802.txt? 20140817.txt? 20140901.txt? 20140916.txt? 20141001.txt? 20141016.txt? 20141031.txt? 20141115.txt 20140803.txt? 20140818.txt? 20140902.txt? 20140917.txt? 20141002.txt? 20141017.txt? 20141101.txt? 20141116.txt 20140804.txt? 20140819.txt? 20140903.txt? 20140918.txt? 20141003.txt? 20141018.txt? 20141102.txt? 20141117.txt 20140805.txt? 20140820.txt? 20140904.txt? 20140919.txt? 20141004.txt? 20141019.txt? 20141103.txt? rxlog.txt 20140806.txt? 20140821.txt? 20140905.txt? 20140920.txt? 20141005.txt? 20141020.txt? 20141104.txt? tail.pl 20140807.txt? 20140822.txt? 20140906.txt? 20140921.txt? 20141006.txt? 20141021.txt? 20141105.txt? 20140808.txt? 20140823.txt? 20140907.txt? 20140922.txt? 20141007.txt? 20141022.txt? 20141106.txt 20140809.txt? 20140824.txt? 20140908.txt? 20140923.txt? 20141008.txt? 20141023.txt? 20141107.txt 20140810.txt? 20140825.txt? 20140909.txt? 20140924.txt? 20141009.txt? 20141024.txt? 20141108.txt 20140811.txt? 20140826.txt? 20140910.txt? 20140925.txt? 20141010.txt? 20141025.txt? 20141109.txt 20140812.txt? 20140827.txt? 20140911.txt? 20140926.txt? 20141011.txt? 20141026.txt? 20141110.txt 20140813.txt? 20140828.txt? 20140912.txt? 20140927.txt? 20141012.txt? 20141027.txt? 20141111.txt 20140814.txt? 20140829.txt? 20140913.txt? 20140928.txt? 20141013.txt? 20141028.txt? 20141112.txt

tail.pl, a Perl script which is attached, deals with the extraction of the data. In this case the RXKEY's only indicating who key the circuit. I also pull in the database file to nicely display the node QTH and location.

Here is what the processed rxlog looks like:

09/09/2014 08:41:26 RXKEY 40865?? WD9EQD? 147.435 Simplex?????? Smithville, NJ 09/09/2014 08:41:39 RXKEY 40561?? WA3DSP? ECHOLINK - 147090???? Richboro, PA - Hub 09/09/2014 08:41:45 RXKEY 40865?? WD9EQD? 147.435 Simplex?????? Smithville, NJ 09/09/2014 08:41:49 RXKEY 40561?? WA3DSP? ECHOLINK - 147090???? Richboro, PA - Hub 09/09/2014 08:41:59 RXKEY 29817?? NY3J??? 446.150 Simplex 91.5? Bensalem, PA

The rxlog is read by a simple script which keeps tabs on what the system is doing. The Perl script, tail.pl, is run in the background constantly monitoring the current archive file and saving parsed data to rxlog.txt :

[root@WA3DSP_Allstar 27225]# cat /usr/local/sbin/rxlog.sh #! /bin/bash

tail -f /var/log/asterisk/audio/27225/rxlog.txt

Of course this could be expanded to view other parameters as all of the control data is in the individual text files. In my case the only thing that was important to me was who keyed or who is keyed in a situation where someone is hanging a circuit. It would be easy to show keyed status in a display using RXKEY and RXUNKEY

Where you put the files and how you deal with the data is your option. These are only examples.

73 Doug WA3DSP http://www.crompton.com/hamradio

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.