Best way to link multiple nodes
I have set up an allstar system with 5 private nodes (soon to be 7). I can link the individual nodes to one another, or say 4 of the nodes to the 5th, but is there a better way? I was looking at ConfBridge but couldn't get it to work.. not even sure it would work. I tried several things (I'm still learning) but I made an entry under [radio-secure] exten => 1000,1,ConfBridge(101) I was hoping to be able to do *31000 and connect to the bridge. But it did nothing. I just want to be able to have multiple bridges and be free to connect any node to any bridge. If I connect all the nodes to a single node, I can no longer take that single node and connected it to something else without disconnecting all the other nodes connected to it. Just not sure what the norm is...if there is one. Thanks -Mike KF7MBK
set up a hub node (use Zap/pseudo instead of Radio/usbxxxxx in your rpt.conf file for the rxchannel value) and connect your nodes to the hub. easy peasy lemon squeezy -- Bryan Sent from my iPhone 5...No electrons were harmed in the sending of this message.
On Dec 16, 2014, at 10:40, Mike M <kf7mbk@w7ara.net> wrote:
I have set up an allstar system with 5 private nodes (soon to be 7).
I can link the individual nodes to one another, or say 4 of the nodes to the 5th, but is there a better way? I was looking at ConfBridge but couldn't get it to work.. not even sure it would work.
I tried several things (I'm still learning) but I made an entry under [radio-secure] exten => 1000,1,ConfBridge(101)
I was hoping to be able to do *31000 and connect to the bridge. But it did nothing.
I just want to be able to have multiple bridges and be free to connect any node to any bridge. If I connect all the nodes to a single node, I can no longer take that single node and connected it to something else without disconnecting all the other nodes connected to it.
Just not sure what the norm is...if there is one.
Thanks -Mike KF7MBK _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Configuring one node as the "hub" is a good way to do it but that node does not have to be a pseudo node. It can have a radio or repeater connected just like any of the satellite nodes. I would suggest that the hub has a boot macro that does a permanent connect to all of the satellite nodes. The advantage being that all you have to do is reboot/restart one node to recreate the connections. The disadvantage of this scheme is that it is totally dependent on one node and its Internet connection for the system to work. Of course if the hub node was a central repeater then it would not make much difference anyway. It would have to work for the system to be functional. I use this scheme and it works well. An alternative that might even work better would be to have the satellite nodes setup in a boot macro to permanently connect to the hub. Either way if you reboot/restart any one node it would recover. 73 Doug WA3DSP http://www.crompton.com/hamradio
From: kf7mbk@w7ara.net Date: Tue, 16 Dec 2014 08:40:34 -0700 To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Best way to link multiple nodes
I have set up an allstar system with 5 private nodes (soon to be 7).
I can link the individual nodes to one another, or say 4 of the nodes to the 5th, but is there a better way? I was looking at ConfBridge but couldn't get it to work.. not even sure it would work.
I tried several things (I'm still learning) but I made an entry under [radio-secure] exten => 1000,1,ConfBridge(101)
I was hoping to be able to do *31000 and connect to the bridge. But it did nothing.
I just want to be able to have multiple bridges and be free to connect any node to any bridge. If I connect all the nodes to a single node, I can no longer take that single node and connected it to something else without disconnecting all the other nodes connected to it.
Just not sure what the norm is...if there is one.
Thanks -Mike KF7MBK _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
If your radio interface happens to be RTCMs there way to combine non-voting sites with a parameter called mixminus. With this configuration all RTCMs are the same node and always connected. It is easy to disconnect RTCMs with your choice of the *CLI, telnet or Allmon. Let me know if you want more details.
On Dec 16, 2014, at 7:40 AM, Mike M <kf7mbk@w7ara.net> wrote:
I have set up an allstar system with 5 private nodes (soon to be 7).
I can link the individual nodes to one another, or say 4 of the nodes to the 5th, but is there a better way? I was looking at ConfBridge but couldn't get it to work.. not even sure it would work.
I tried several things (I'm still learning) but I made an entry under [radio-secure] exten => 1000,1,ConfBridge(101)
I was hoping to be able to do *31000 and connect to the bridge. But it did nothing.
I just want to be able to have multiple bridges and be free to connect any node to any bridge. If I connect all the nodes to a single node, I can no longer take that single node and connected it to something else without disconnecting all the other nodes connected to it.
Just not sure what the norm is...if there is one.
Thanks -Mike KF7MBK _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
Bryan D. Boyle -
Doug Crompton -
Mike M -
Tim Sawyer