Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01
The new hub node is online and connected but I was unable to run dahdi_test root@hub:/usr/sbin# ls -la dahdi_test -rwxr-xr-x 1 root root 6416 Mar 1 12:26 dahdi_test It's right there^ root@hub:/usr/sbin# ./dahdi_test -c 100 -bash: ./dahdi_test: No such file or directory As it happens I installed it as 64 bit and dahdi_test is a 32 bit executable. root@hub:/usr/sbin# file dahdi_test dahdi_test: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=2f93def536fd49566dde40b7f02bcf25072fdaa8, stripped So I needed to install libc6-i386 apt-get install libc6-i386 Now dadhi_test is worrking. Best: 100.000% -- Worst: 99.214% -- Average: 99.617351% Cumulative Accuracy (not per pass): 99.998 Danny K5CG From: "Nate Hardman" <nhardman1428@gmail.com> To: "Users of Asterisk app_rpt" <app_rpt-users@lists.allstarlink.org> Sent: Saturday, March 24, 2018 1:39:17 PM Subject: Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01 bug fixed in net-setup scripts if ran multiple times On Sat, Mar 24, 2018 at 2:23 PM, K5CG < [ mailto:k5cg@hamoperator.org | k5cg@hamoperator.org ] > wrote: After some reading I got the networking up. systemctl stop ifup@eth0.service systemctl start ifup@eth0.service I can ping out to the Internet and apt-get update apt-get upgrade -y No updates were applied however. My node appears online now on the status page! WOOT! I'll update hostname, domain name etc manually now. If there are updates to the build, I don't mind starting over to test it. VMs are quick and easy to rebuild. Danny K5CG ----- Original Message ----- From: "Steve Zingman" < [ mailto:szingman@msgstor.com | szingman@msgstor.com ] > To: "Users of Asterisk app_rpt" < [ mailto:app_rpt-users@lists.allstarlink.org | app_rpt-users@lists.allstarlink.org ] >, "k5cg" < [ mailto:k5cg@hamoperator.org | k5cg@hamoperator.org ] > Sent: Saturday, March 24, 2018 11:35:28 AM Subject: Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01 Danny, I'm copying Nate on this so he can comment on the ASL menu issue. One suggestion is as root: apt-get update apt-get upgrade -y I have pushed a update to the menus Steve On 03/24/2018 12:30 PM, K5CG wrote:
I have a question about installation of this build.
I downloaded ASL_1.01-20180228-amd64-i386-debian-stretch-netinst.zip, and used the iso to build a virtual machine on Xenserver 7.2 (for a hub).
The asl-menu appears to fail to set hostname, domain name, network parameters, just about anything, even running it as root. After rebooting, the hostname and domain name are not changed, there is no configured networking.
Looking in /etc/network/interfaces there are many instances of my static IP, mask and gateway (a complete set for every time I ran the network setup from asl-menu).
/etc/systemd/network/ is empty. /etc/resolv.conf has correct information in it.
systemctl start network.service Failed to start network.service. network.service not found.
rpt.conf looks like it was saved with my new node info and the Timezone update was successful.
I've probably missed something so feel free to correct me, please.
Danny K5CG
----- Original Message ----- From: "Greg Noneman" < [ mailto:gregn1@cox.net | gregn1@cox.net ] > To: "Users of Asterisk app_rpt" < [ mailto:app_rpt-users@lists.allstarlink.org | app_rpt-users@lists.allstarlink.org ] > Sent: Friday, March 23, 2018 5:58:02 PM Subject: Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01
Steve,
I have a question about the installation/update of AllStarLink Asterisk version 1.01 that I don’t believe the ReadMe file addressed (pardon me if I missed it). I have both Intel/AMD and RPi installations that are currently running DIAL. Is there any simple/effective way to “automatically" upgrade tp ASLA 1.01, or is it necessary to back up my config files, perform a new clean install, and then restore my configs?
Thanks, Greg WB6ZSU
On Mar 18, 2018, at 3:08 PM, Steve Zingman < [ mailto:szingman@msgstor.com | szingman@msgstor.com ] > wrote:
We are happy to announce AllStarLink Asterisk version 1.01. This updated version contains a number of bug fixes and enhancements. The method used for installing and upgrading AllStarLink Asterisk has been changed from building from source code to simply install and upgrade the programs that make up AllStarLink Asterisk. AllStarLink Asterisk is now using the same update method any other Debian program has used for years. The package management system is called APT (acronym for Advanced Package Tool). APT is a set of tools for managing Debian packages, and therefore the applications installed on your Debian system.
The link on [ http://allstarlink.org/ | allstarlink.org ] and the wiki < [ http://wiki.allstarlink.org/ | wiki.allstarlink.org ] > Now point to the new images for x86/AMD and Raspberry Pi.
< [ http://dvswitch.org/files/ASL_Images/Intel-AMD/Stretch/ASL_1.01-20180228-amd... | http://dvswitch.org/files/ASL_Images/Intel-AMD/Stretch/ASL_1.01-20180228-amd... ] > < [ http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-... | http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-... ] >
The repository of AllStarLink Images is located at < [ http://dvswitch.org/files/ASL_Images/ | http://dvswitch.org/files/ASL_Images/ ] >
For a more complete explanation of the changes to AllStarLink Asterisk see < [ http://dvswitch.org/files/ASL_Images/readme.txt | http://dvswitch.org/files/ASL_Images/readme.txt ] >
73, Steve N4IRS _______________________________________________ App_rpt-users mailing list [ mailto:App_rpt-users@lists.allstarlink.org | App_rpt-users@lists.allstarlink.org ] [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ]
To unsubscribe from this list please visit [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list [ mailto:App_rpt-users@lists.allstarlink.org | App_rpt-users@lists.allstarlink.org ] [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ]
To unsubscribe from this list please visit [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list [ mailto:App_rpt-users@lists.allstarlink.org | App_rpt-users@lists.allstarlink.org ] [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ]
To unsubscribe from this list please visit [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list [ mailto:App_rpt-users@lists.allstarlink.org | App_rpt-users@lists.allstarlink.org ] [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] To unsubscribe from this list please visit [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Nathan Hardman [ mailto:nhardman1428@gmail.com | nhardman1428@gmail.com ] [ mailto:N8THN@ARRL.NET | N8THN@ARRL.NET ] _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Danny, Thanks for the update. I will add a 64 bit package for the DAHDI tools. 73, Steve N4IRS On 03/24/2018 11:26 PM, K5CG wrote:
The new hub node is online and connected but I was unable to run dahdi_test
root@hub:/usr/sbin# ls -la dahdi_test -rwxr-xr-x 1 root root 6416 Mar 1 12:26 dahdi_test
It's right there^
root@hub:/usr/sbin# ./dahdi_test -c 100 -bash: ./dahdi_test: No such file or directory
As it happens I installed it as 64 bit and dahdi_test is a 32 bit executable.
root@hub:/usr/sbin# file dahdi_test dahdi_test: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=2f93def536fd49566dde40b7f02bcf25072fdaa8, stripped
So I needed to install libc6-i386
apt-get install libc6-i386
Now dadhi_test is worrking.
Best: 100.000% -- Worst: 99.214% -- Average: 99.617351% Cumulative Accuracy (not per pass): 99.998
Danny K5CG
------------------------------------------------------------------------ *From: *"Nate Hardman" <nhardman1428@gmail.com> *To: *"Users of Asterisk app_rpt" <app_rpt-users@lists.allstarlink.org> *Sent: *Saturday, March 24, 2018 1:39:17 PM *Subject: *Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01
bug fixed in net-setup scripts if ran multiple times
On Sat, Mar 24, 2018 at 2:23 PM, K5CG <k5cg@hamoperator.org <mailto:k5cg@hamoperator.org>> wrote:
After some reading I got the networking up.
systemctl stop ifup@eth0.service systemctl start ifup@eth0.service
I can ping out to the Internet and apt-get update apt-get upgrade -y
No updates were applied however.
My node appears online now on the status page! WOOT!
I'll update hostname, domain name etc manually now. If there are updates to the build, I don't mind starting over to test it. VMs are quick and easy to rebuild.
Danny K5CG
----- Original Message ----- From: "Steve Zingman" <szingman@msgstor.com <mailto:szingman@msgstor.com>> To: "Users of Asterisk app_rpt" <app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org>>, "k5cg" <k5cg@hamoperator.org <mailto:k5cg@hamoperator.org>> Sent: Saturday, March 24, 2018 11:35:28 AM Subject: Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01
Danny, I'm copying Nate on this so he can comment on the ASL menu issue. One suggestion is as root: apt-get update apt-get upgrade -y
I have pushed a update to the menus
Steve
On 03/24/2018 12:30 PM, K5CG wrote: > I have a question about installation of this build. > > I downloaded ASL_1.01-20180228-amd64-i386-debian-stretch-netinst.zip, and used the iso to build a virtual machine on Xenserver 7.2 (for a hub). > > The asl-menu appears to fail to set hostname, domain name, network parameters, just about anything, even running it as root. After rebooting, the hostname and domain name are not changed, there is no configured networking. > > Looking in /etc/network/interfaces there are many instances of my static IP, mask and gateway (a complete set for every time I ran the network setup from asl-menu). > > /etc/systemd/network/ is empty. > /etc/resolv.conf has correct information in it. > > systemctl start network.service > Failed to start network.service. network.service not found. > > rpt.conf looks like it was saved with my new node info and the Timezone update was successful. > > I've probably missed something so feel free to correct me, please. > > Danny > K5CG > > ----- Original Message ----- > From: "Greg Noneman" <gregn1@cox.net <mailto:gregn1@cox.net>> > To: "Users of Asterisk app_rpt" <app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org>> > Sent: Friday, March 23, 2018 5:58:02 PM > Subject: Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01 > > Steve, > > I have a question about the installation/update of AllStarLink Asterisk version 1.01 that I don’t believe the ReadMe file addressed (pardon me if I missed it). I have both Intel/AMD and RPi installations that are currently running DIAL. Is there any simple/effective way to “automatically" upgrade tp ASLA 1.01, or is it necessary to back up my config files, perform a new clean install, and then restore my configs? > > > Thanks, > Greg > WB6ZSU > >> On Mar 18, 2018, at 3:08 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote: >> >> We are happy to announce AllStarLink Asterisk version 1.01. This updated version contains a number of bug fixes and enhancements. The method used for installing and upgrading AllStarLink Asterisk has been changed from building from source code to simply install and upgrade the programs that make up AllStarLink Asterisk. AllStarLink Asterisk is now using the same update method any other Debian program has used for years. The package management system is called APT (acronym for Advanced Package Tool). APT is a set of tools for managing Debian packages, and therefore the applications installed on your Debian system. >> >> The link on allstarlink.org <http://allstarlink.org> and the wiki <wiki.allstarlink.org <http://wiki.allstarlink.org>> Now point to the new images for x86/AMD and Raspberry Pi. >> >> <http://dvswitch.org/files/ASL_Images/Intel-AMD/Stretch/ASL_1.01-20180228-amd64-i386-debian-stretch-netinst.zip> >> <http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.zip> >> >> The repository of AllStarLink Images is located at <http://dvswitch.org/files/ASL_Images/> >> >> For a more complete explanation of the changes to AllStarLink Asterisk see <http://dvswitch.org/files/ASL_Images/readme.txt> >> >> 73, Steve N4IRS >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--
Nathan Hardman nhardman1428@gmail.com <mailto:nhardman1428@gmail.com> N8THN@ARRL.NET <mailto:N8THN@ARRL.NET>
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I downloaded the raspberry pi latest http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-... I followed the included readme file instructions and It booted fine but the asl-menu does not work correctly for the networking (static IP), and it doesn't set the hostname or domain name. After rebooting at the end of the process everything is the same as it was. Hostname is still "repeater" and IP is still DHCP. I seem to recall having this issue before on an older build. Is there a trick to get this to work or must it be done manually? Danny K5CG
Danny, Did you do this before asl-menu? sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot Steve N4IRS On 4/20/2018 2:09 PM, K5CG wrote:
I downloaded the raspberry pi latest http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-...
I followed the included readme file instructions and It booted fine but the asl-menu does not work correctly for the networking (static IP), and it doesn't set the hostname or domain name. After rebooting at the end of the process everything is the same as it was. Hostname is still "repeater" and IP is still DHCP.
I seem to recall having this issue before on an older build. Is there a trick to get this to work or must it be done manually?
Danny K5CG
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (2)
-
K5CG -
Steve Zingman