Garmin GPS 18 LVC RTCM wiring
I am now going to solder the Garmin 18x GPS to the DB15 connector for the RTCM. I am a little confused by the labels so is this pinout correct? RTCM --- GPS GRX ----- TXD GPPS ---- GND ------ GND +5V ----- Input Voltage GTX ----- RCV RST ----- Is this correct? There is also a "measurement Pulse Output" wire, but I don't know what to do with that. Garmin GPS 18 wiring http://wiki.elphel.com/images/thumb/f/fb/Garmin_gps18x_wiring.jpeg/500px-Gar...
On Fri, 18 Dec 2015, Skyler F wrote:
Is this correct? There is also a "measurement Pulse Output" wire, but I don't know what to do with that.
That is the most important wire. It is the GPPS wire, which provides the precise pulse-per-second needed to get timing. The rest looks right. -Willem ================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder@prinmath.com
participants (2)
-
Skyler F -
Willem Schreuder