re updating nodes
What is the preferred method of updating nodes these days? I think the process was changed recently. Thanks, Jon VA3RQ
see https://allstarlink.org/support.html#astupgrade
Date: Mon, 17 Jan 2011 15:57:49 -0500 From: jrorke@cogeco.ca To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] re updating nodes
What is the preferred method of updating nodes these days?
I think the process was changed recently.
Thanks,
Jon VA3RQ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Hi All, We selected the intel D525MW mini-itx board as the standard for our 12V systems. Last night we attempted a ACID install and all went well until the final reboot. The error we are getting (after downloading the config and rebooting) is: "mpg123 no process killed Asterisk ended with exit status 1 Asterisk died with code 1 Automatically restarting Asterisk." Rinse and repeat... It loops on this forever... I then tried a fresh burn CD and a new motherboard and the same issue was the final result. Pete
participants (3)
-
Jim Duuuude -
Jon Rorke -
Peter Elke