Ok, That was dumb. I added the Duplex line in the rpt.conf file, and didn't think about a conflict with the usbradio.conf. Next question, now that it works, I have an annoying squelch tail, how do I eliminate that? usbradio.conf [usb27179] hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=103.5 rxctcssfreqs=103.5 txctcssfreqs=103.5 ;rxctcssoverride=0 carrierfrom=dsp ctcssfrom=dsp rxdemod=flat txprelim=yes txlimonly=no txtoctype=notone txmixa=composite txmixb=no invertptt=0 duplex=0 :Change this line as well as in the rpt.conf rxondelay=0 rxnoisefiltype=0 eeprom=0 usbradio_tune_usb27179.conf [usb27179] ; name=usb27179 ; devicenum=2 devstr=5-2 rxmixerset=500 txmixaset=15 txmixbset=500 rxvoiceadj=0.500000 rxctcssadj=0.500000 txctcssadj=500 rxsquelchadj=500 On Mon, Jan 17, 2011 at 4:40 PM, Buddy Brannan <buddy@brannan.name> wrote:

Oh yeah, and also be sure to put duplex=1 in usbradio.conf

-- Buddy Brannan, KB5ELV - Erie, PA Phone: (814) 860-3194 or 888-75-BUDDY

On Jan 17, 2011, at 7:21 PM, KI6PSP (Ed) wrote:

...

At first I thought it was an RF problem, so I dropped filters in. Still the same problem, so I thought floating ground. I disconnected the TX Radio, and it still does it.

When I key my handheld, the RX radio feeds the Discriminator audio to my URI and Asterisk hears me. But for some reason, it acts like I am just kerchunking it. I see the output in the Asterisk Console for the "Donk" every few seconds. I am not unkeying it, but it is acting like I am. Now granted, I don't have a service monitor to output the proper tone for the "radio tune rxtone" to set properly, but it works just fine on half duplex.

Did I miss something? All I changed was the "Duplex=1" ---> "Duplex=2" I would really love to fully deploy this repeater, now that I have all of the parts I need. -- KI6PSP (Ed) _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-- KI6PSP (Ed)