I just found a problem and not sure how to fix it. Last Monday I changed my udp port number after some had indicated issues connecting. I was using 4569, though on my 28599 node 4570 seemed to work, though I never have inbound connects, just outbound. So after modifying the port numbers in iax.conf, rpt.conf, etc I restarted asterisk and changed the port mapping in my router. Still nobody can connect. So I looked at the downloaded rpt_extnodes file and the port number for both nodes is 4569. I have uncommented the statpost lines in rpt.conf, which is a Limey distro, BTW. Also, FWIW when I point a browser at http://stats.allstarlink.org/uhandler.php the response is error... What I have: ; ** For Limey Linux ** statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates What might I have wrong? GeorgeC W2DB -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel
Well, before I comment very much, who is the ISP ? ...mike/kb8jnm On 6/27/2018 10:37 PM, George Csahanin wrote:
I just found a problem and not sure how to fix it. Last Monday I changed my udp port number after some had indicated issues connecting. I was using 4569, though on my 28599 node 4570 seemed to work, though I never have inbound connects, just outbound.
So after modifying the port numbers in iax.conf, rpt.conf, etc I restarted asterisk and changed the port mapping in my router.
Still nobody can connect. So I looked at the downloaded rpt_extnodes file and the port number for both nodes is 4569.
I have uncommented the statpost lines in rpt.conf, which is a Limey distro, BTW. Also, FWIW when I point a browser at http://stats.allstarlink.org/uhandler.php the response is error...
What I have:
; ** For Limey Linux ** statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
What might I have wrong?
GeorgeC W2DB
I might suggest as you may have done already, check the IP of the server at the server. But match that with your forward port of the router..... Just a common sense check-up/verify. Make sure you have not been in a DHCP mode and possibly bumped of the original Ip you had and are forwarding 4569 to. That would be my first check anyway. ...mike/kb8jnm On 6/27/2018 10:37 PM, George Csahanin wrote:
I just found a problem and not sure how to fix it. Last Monday I changed my udp port number after some had indicated issues connecting. I was using 4569, though on my 28599 node 4570 seemed to work, though I never have inbound connects, just outbound.
So after modifying the port numbers in iax.conf, rpt.conf, etc I restarted asterisk and changed the port mapping in my router.
Still nobody can connect. So I looked at the downloaded rpt_extnodes file and the port number for both nodes is 4569.
I have uncommented the statpost lines in rpt.conf, which is a Limey distro, BTW. Also, FWIW when I point a browser at http://stats.allstarlink.org/uhandler.php the response is error...
What I have:
; ** For Limey Linux ** statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
What might I have wrong?
GeorgeC W2DB
Ya know, I should have read and understood more than I did at first. Sorry, But, can you double check there are no type errors in the setting of your port at allstarling.org ...mike/kb8jnm On 6/27/2018 10:37 PM, George Csahanin wrote:
I just found a problem and not sure how to fix it. Last Monday I changed my udp port number after some had indicated issues connecting. I was using 4569, though on my 28599 node 4570 seemed to work, though I never have inbound connects, just outbound.
So after modifying the port numbers in iax.conf, rpt.conf, etc I restarted asterisk and changed the port mapping in my router.
Still nobody can connect. So I looked at the downloaded rpt_extnodes file and the port number for both nodes is 4569.
I have uncommented the statpost lines in rpt.conf, which is a Limey distro, BTW. Also, FWIW when I point a browser at http://stats.allstarlink.org/uhandler.php the response is error...
What I have:
; ** For Limey Linux ** statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
What might I have wrong?
GeorgeC W2DB
George, Take a look at the network settings for the server 28599.ddns.me on allstarlink.org 73, Steve N4IRS On 06/27/2018 10:37 PM, George Csahanin wrote:
I just found a problem and not sure how to fix it. Last Monday I changed my udp port number after some had indicated issues connecting. I was using 4569, though on my 28599 node 4570 seemed to work, though I never have inbound connects, just outbound.
So after modifying the port numbers in iax.conf, rpt.conf, etc I restarted asterisk and changed the port mapping in my router.
Still nobody can connect. So I looked at the downloaded rpt_extnodes file and the port number for both nodes is 4569.
I have uncommented the statpost lines in rpt.conf, which is a Limey distro, BTW. Also, FWIW when I point a browser at http://stats.allstarlink.org/uhandler.php the response is error...
What I have:
; ** For Limey Linux ** statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
What might I have wrong?
GeorgeC W2DB
On 6/27/18 10:37 PM, George Csahanin wrote:
I just found a problem and not sure how to fix it. Last Monday I changed my udp port number after some had indicated issues connecting. I was using 4569, though on my 28599 node 4570 seemed to work, though I never have inbound connects, just outbound.
Do you have a NAT device in your network? If so you have a port forwarding forwarding issue.
So after modifying the port numbers in iax.conf, rpt.conf, etc I restarted asterisk and changed the port mapping in my router.
You must change this in the portal under your server config.
I have uncommented the statpost lines in rpt.conf, which is a Limey distro,
This is very old, you should install the Debian based ASL distro.
BTW. Also, FWIW when I point a browser at http://stats.allstarlink.org/uhandler.php the response is error...
This is normal, your IP must match the IP of the server for this to work, and you need to pass the variables to it. Check in the nodes list in the portal and see if you're registered (green). The stats server is a completely different box and it has no bearing if your node is registered/connectable on the network. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
participants (4)
-
Bryan Fields -
George Csahanin -
Mike -
Steve Zingman