Help getting started with RTCM and ACID
I have 2 RTCM boxes configured, and an ACID install. I figured out I needed to create a voter.conf file, and it is as follows: [general] port = 667 password = @@@@@@ [28989] NORTH = @@@@@,transmit SOUTH = @@@@@,master,transmit (@ being my passwords) Do I need to change anything in the rpt.conf file? I read something about 1 line needing modified? Also, I am on a LAN and the server has a static IP, can I simply enter the IP in the FQDN field on the RTCM or must it be a FQDN that resolves? I tried both, and Ithink I'm doing everything right, but I can't get the darn box to connect to my server... After I get this connected it's time to break out the soldering iron and hook this all up to my 2 repeaters for my simulcast project... fun fun! Any hints/tips? TIA Chris N3FYI
You need to change the rxchannel in rpt.conf [28989] ; Change this to your assigned node number rxchannel = Voter/28989 ; Voter -- Tim :wq On Jan 30, 2014, at 7:22 AM, Chris Bunting <chris@lancnet.com> wrote:
I have 2 RTCM boxes configured, and an ACID install. I figured out I needed to create a voter.conf file, and it is as follows:
[general] port = 667 password = @@@@@@
[28989] NORTH = @@@@@,transmit SOUTH = @@@@@,master,transmit
(@ being my passwords)
Do I need to change anything in the rpt.conf file? I read something about 1 line needing modified?
Also, I am on a LAN and the server has a static IP, can I simply enter the IP in the FQDN field on the RTCM or must it be a FQDN that resolves?
I tried both, and Ithink I'm doing everything right, but I can't get the darn box to connect to my server...
After I get this connected it's time to break out the soldering iron and hook this all up to my 2 repeaters for my simulcast project... fun fun!
Any hints/tips?
TIA
Chris N3FYI _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thanks, I did manage to change that, however I still can not get either box to get to the connected state. I've also defaulted the RTCM after flashing it just to make sure that wasn't the problem, and still no dice? On Jan 30, 2014 12:38 PM, "Tim Sawyer" <tim.sawyer@mac.com> wrote:
You need to change the rxchannel in rpt.conf
[28989] ; Change this to your assigned node number rxchannel = Voter/28989 ; Voter
-- Tim :wq
On Jan 30, 2014, at 7:22 AM, Chris Bunting <chris@lancnet.com> wrote:
I have 2 RTCM boxes configured, and an ACID install. I figured out I needed to create a voter.conf file, and it is as follows:
[general] port = 667 password = @@@@@@
[28989] NORTH = @@@@@,transmit SOUTH = @@@@@,master,transmit
(@ being my passwords)
Do I need to change anything in the rpt.conf file? I read something about 1 line needing modified?
Also, I am on a LAN and the server has a static IP, can I simply enter the IP in the FQDN field on the RTCM or must it be a FQDN that resolves?
I tried both, and Ithink I'm doing everything right, but I can't get the darn box to connect to my server...
After I get this connected it's time to break out the soldering iron and hook this all up to my 2 repeaters for my simulcast project... fun fun!
Any hints/tips?
TIA
Chris N3FYI _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thanks to Tim's help I am up and running! It was a conflict with my password having the same name as the node.... whoops! Thanks Tim :) Thanks, Chris Bunting Lancaster Networks, LLC | Lancaster Towers, LLC 717-459-4321 On Thu, Jan 30, 2014 at 12:38 PM, Tim Sawyer <tim.sawyer@mac.com> wrote:
You need to change the rxchannel in rpt.conf
[28989] ; Change this to your assigned node number rxchannel = Voter/28989 ; Voter
-- Tim :wq
On Jan 30, 2014, at 7:22 AM, Chris Bunting <chris@lancnet.com> wrote:
I have 2 RTCM boxes configured, and an ACID install. I figured out I needed to create a voter.conf file, and it is as follows:
[general] port = 667 password = @@@@@@
[28989] NORTH = @@@@@,transmit SOUTH = @@@@@,master,transmit
(@ being my passwords)
Do I need to change anything in the rpt.conf file? I read something about 1 line needing modified?
Also, I am on a LAN and the server has a static IP, can I simply enter the IP in the FQDN field on the RTCM or must it be a FQDN that resolves?
I tried both, and Ithink I'm doing everything right, but I can't get the darn box to connect to my server...
After I get this connected it's time to break out the soldering iron and hook this all up to my 2 repeaters for my simulcast project... fun fun!
Any hints/tips?
TIA
Chris N3FYI _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (2)
-
Chris Bunting -
Tim Sawyer