You need to change the rxchannel in rpt.conf [28989] ; Change this to your assigned node number rxchannel = Voter/28989 ; Voter -- Tim :wq On Jan 30, 2014, at 7:22 AM, Chris Bunting <chris@lancnet.com> wrote:
I have 2 RTCM boxes configured, and an ACID install. I figured out I needed to create a voter.conf file, and it is as follows:
[general] port = 667 password = @@@@@@
[28989] NORTH = @@@@@,transmit SOUTH = @@@@@,master,transmit
(@ being my passwords)
Do I need to change anything in the rpt.conf file? I read something about 1 line needing modified?
Also, I am on a LAN and the server has a static IP, can I simply enter the IP in the FQDN field on the RTCM or must it be a FQDN that resolves?
I tried both, and Ithink I'm doing everything right, but I can't get the darn box to connect to my server...
After I get this connected it's time to break out the soldering iron and hook this all up to my 2 repeaters for my simulcast project... fun fun!
Any hints/tips?
TIA
Chris N3FYI _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.