Try *152*525*2 The *x on the end sets the TX offset. *1 = minus, *2 = simplex, *3 = plus -- Tim :wq

On Jan 8, 2015, at 2:02 AM, Sam Skolfield <kj6qfs@gmail.com> wrote:

Hello group, Assuming that I have a working remote base node, what is the command convention for controlling radio settings like frequency, PL, shift, etc? Still being new the fundamentals of app_rpt, I am trying to control the radio with "rpt fun" through the SSH.

Example:

rpt fun node 152525 (trying to tune my xcat to 52.525 via remote base function 1)

I'm using Tim's example rpt.conf:

rxchannel = Simpleusb/usb ; Rx audio/signalling channel

remote = xcat

civaddr = 32

functions = functions-remote

lconn = PP3=1

ldisc = PP3=0

memory = memory ; Section to hold memory entries (optional)

; remote=ft897 for Yaesu FT-897 or

; remote=rbi for Doug Hall RBI1

; remote=kenwood for Kenwood mobiles such as the TMG707A

; remote=ic706 for the Icom IC-706

ioport = /dev/ttyUSB0 ; Specify port for serial port (QFS specified his USB)

iospeed = 19200

dusbabek = yes

;iobase = 0x378 ; Specify IO port for parallel port (optional)

authlevel = 2 ; Remote base authentication level

;; authlevel = 0 : Anyone can use it

;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it

;; authlevel = 2 : Requires log in, asks for it automously

;mars = 0 ; set=1 for IC-706 w/MARS mods (optional)

_________________________________________________________

Any help in general from app_rpt/xcat gurus would be really appreciated!

Thanks for reading, and 73

-- KJ6QFS Sam Skolfield _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.