Hello group, Assuming that I have a working remote base node, what is the command convention for controlling radio settings like frequency, PL, shift, etc? Still being new the fundamentals of app_rpt, I am trying to control the radio with "rpt fun" through the SSH. Example: rpt fun *node 152525* (trying to tune my xcat to 52.525 via remote base function 1) I'm using Tim's example rpt.conf: rxchannel = Simpleusb/usb ; Rx audio/signalling channel remote = xcat civaddr = 32 functions = functions-remote lconn = PP3=1 ldisc = PP3=0 memory = memory ; Section to hold memory entries (optional) ; remote=ft897 for Yaesu FT-897 or ; remote=rbi for Doug Hall RBI1 ; remote=kenwood for Kenwood mobiles such as the TMG707A ; remote=ic706 for the Icom IC-706 ioport = /dev/ttyUSB0 ; Specify port for serial port (QFS specified his USB) iospeed = 19200 dusbabek = yes ;iobase = 0x378 ; Specify IO port for parallel port (optional) authlevel = 2 ; Remote base authentication level ;; authlevel = 0 : Anyone can use it ;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it ;; authlevel = 2 : Requires log in, asks for it automously ;mars = 0 ; set=1 for IC-706 w/MARS mods (optional) _________________________________________________________ Any help in general from app_rpt/xcat gurus would be really appreciated! Thanks for reading, and 73 -- KJ6QFS Sam Skolfield