Courtesy Tone when SIP connection unkeys
I have a private allstar node set up that allows a SIP connection. No matter what I do I can't seem to get allstar to TX a courtesy tone on the radio when the SIP connection unkeys. I feel like I've done this before but I've set every courtesy tone to a valid tone in rpt.conf and I get CT if the radio unkeys, but not if the SIP connection unkeys. Is this just not possible or am I being dumb? Regards, Mike Montalvo, KF7MBK ARA Membership Chair www.w7ara.org
Mike, You probably need to look at other setting to be sure... But first, be sure your current settings are not "out-of-range" and ignored. & Type errors etc. Some places to look... unlinkedct=ct2 remotect=ct3 linkunkeyct=ct8 nolocallinkct=1 ; Use unlinkedct if only connected to a local node Just a thought... Be sure to fill us in if you find it. ...mike/kb8jnm
I have a private allstar node set up that allows a SIP connection.
No matter what I do I can't seem to get allstar to TX a courtesy tone on the radio when the SIP connection unkeys. I feel like I've done this before but I've set every courtesy tone to a valid tone in rpt.conf and I get CT if the radio unkeys, but not if the SIP connection unkeys. Is this just not possible or am I being dumb?
Regards, Mike Montalvo, KF7MBK ARA Membership Chair www.w7ara.org _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
My experience is that SIP connections use the "linkunkeyct" so be sure you have it pointing to a courtesy tone that is valid and has some value defined. N5ZUA On 12/15/2015 8:58 PM, mike@midnighteng.com wrote:
Mike, You probably need to look at other setting to be sure... But first, be sure your current settings are not "out-of-range" and ignored. & Type errors etc.
Some places to look... unlinkedct=ct2 remotect=ct3 linkunkeyct=ct8 nolocallinkct=1 ; Use unlinkedct if only connected to a local node Just a thought...
Be sure to fill us in if you find it.
...mike/kb8jnm
I have a private allstar node set up that allows a SIP connection.
No matter what I do I can't seem to get allstar to TX a courtesy tone on the radio when the SIP connection unkeys. I feel like I've done this before but I've set every courtesy tone to a valid tone in rpt.conf and I get CT if the radio unkeys, but not if the SIP connection unkeys. Is this just not possible or am I being dumb?
Regards, Mike Montalvo, KF7MBK ARA Membership Chair www.w7ara.org _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I set ALL the CTs to the same known good CT, and after the change there was a change on the radio side, but not the SIP side. Set duplex to 1 telemdefault=1 holdofftelem=1, also tried 0 nolocallinkct=0 also tried 1 I'll try again, but I may just dump this V1 BBB install and go to a RP2 install.. Regards, Mike Montalvo, KF7MBK ARA Membership Chair www.w7ara.org On Tue, Dec 15, 2015 at 7:58 PM, <mike@midnighteng.com> wrote:
Mike, You probably need to look at other setting to be sure... But first, be sure your current settings are not "out-of-range" and ignored. & Type errors etc.
Some places to look... unlinkedct=ct2 remotect=ct3 linkunkeyct=ct8 nolocallinkct=1 ; Use unlinkedct if only connected to a local node Just a thought...
Be sure to fill us in if you find it.
...mike/kb8jnm
I have a private allstar node set up that allows a SIP connection.
No matter what I do I can't seem to get allstar to TX a courtesy tone on the radio when the SIP connection unkeys. I feel like I've done this before but I've set every courtesy tone to a valid tone in rpt.conf and I get CT if the radio unkeys, but not if the SIP connection unkeys. Is this just not possible or am I being dumb?
Regards, Mike Montalvo, KF7MBK ARA Membership Chair www.w7ara.org _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I can only say that I am stumped and out of ideas outside of re-compiling your install. Perhaps a look at your sip settings and context. I think it is 'possible' for the format of the audio of the CT to be out of range of the "ALLOWED" formats for/in the sip settings. Something to check. I would not think that should affect rpt output but who knows. ...mike/kb8jnm
I set ALL the CTs to the same known good CT, and after the change there was a change on the radio side, but not the SIP side.
Set duplex to 1 telemdefault=1 holdofftelem=1, also tried 0 nolocallinkct=0 also tried 1
I'll try again, but I may just dump this V1 BBB install and go to a RP2 install..
Regards, Mike Montalvo, KF7MBK ARA Membership Chair www.w7ara.org
On Tue, Dec 15, 2015 at 7:58 PM, <mike@midnighteng.com> wrote:
Mike, You probably need to look at other setting to be sure... But first, be sure your current settings are not "out-of-range" and ignored. & Type errors etc.
Some places to look... unlinkedct=ct2 remotect=ct3 linkunkeyct=ct8 nolocallinkct=1 ; Use unlinkedct if only connected to a local node Just a thought...
Be sure to fill us in if you find it.
...mike/kb8jnm
I have a private allstar node set up that allows a SIP connection.
No matter what I do I can't seem to get allstar to TX a courtesy tone on the radio when the SIP connection unkeys. I feel like I've done this before but I've set every courtesy tone to a valid tone in rpt.conf and I get CT if the radio unkeys, but not if the SIP connection unkeys. Is this just not possible or am I being dumb?
Regards, Mike Montalvo, KF7MBK ARA Membership Chair www.w7ara.org _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Mike M -
mike＠midnighteng.com -
Steve Agee