I can only say that I am stumped and out of ideas outside of re-compiling your install. Perhaps a look at your sip settings and context. I think it is 'possible' for the format of the audio of the CT to be out of range of the "ALLOWED" formats for/in the sip settings. Something to check. I would not think that should affect rpt output but who knows. ...mike/kb8jnm
I set ALL the CTs to the same known good CT, and after the change there was a change on the radio side, but not the SIP side.
Set duplex to 1 telemdefault=1 holdofftelem=1, also tried 0 nolocallinkct=0 also tried 1
I'll try again, but I may just dump this V1 BBB install and go to a RP2 install..
Regards, Mike Montalvo, KF7MBK ARA Membership Chair www.w7ara.org
On Tue, Dec 15, 2015 at 7:58 PM, <mike@midnighteng.com> wrote:
Mike, You probably need to look at other setting to be sure... But first, be sure your current settings are not "out-of-range" and ignored. & Type errors etc.
Some places to look... unlinkedct=ct2 remotect=ct3 linkunkeyct=ct8 nolocallinkct=1 ; Use unlinkedct if only connected to a local node Just a thought...
Be sure to fill us in if you find it.
...mike/kb8jnm
I have a private allstar node set up that allows a SIP connection.
No matter what I do I can't seem to get allstar to TX a courtesy tone on the radio when the SIP connection unkeys. I feel like I've done this before but I've set every courtesy tone to a valid tone in rpt.conf and I get CT if the radio unkeys, but not if the SIP connection unkeys. Is this just not possible or am I being dumb?
Regards, Mike Montalvo, KF7MBK ARA Membership Chair www.w7ara.org _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.