I re-imaged the controller computer and installed it today. The repeaters are now using the linux computer running asterisk and app_rpt as a controller. The P25 should work, but it's in-cabinet repeat only, meaning it will not go through the analog controller. The node numbers are as follows: 40821 - 224.280 41618 - 443.525 42032 - 927.050 For some reason there is no curtsey tone on the repeaters when audio is coming in from a another one. Once we have internet up there we'll be able to change this remotely. The standard allstar commands work to link/delink them *1 <node> = disconnect *2 <node> = listen to audio, no transmit back on that link *3 <node> = full duplex link *70 = link status *71 = disconnect all links *72 = Last Node to Key Up *73 = full system status *80 = Give ID *81 = Give time of day Right now they are all linked up. Once we have the internet up there we can link to other connected repeaters around the globe. 73's -- Bryan Fields, W9CR Florida Simulcast Group, Inc.