[Allstar Digital] DMRGateway Hardware and software

[Michael Hebert]

Steve,

What image are you using for the pi? How are you installing DMRlink onto
the pi?

Thanks,

Michael KD5DFB

On Tue, Dec 1, 2015 at 9:41 AM, Steve N4IRS <szingman at msgstor.com> wrote:

> As of right now, all you need is a Pi and DMRlink. Without DMRlink
> connecting to your repeater, you are not ready for the next step. If you
> can get the playback app running on your DMR repeater, you are ready. Later
> this week, I'll put up DMRGateway for download. You will then need the
> DV3000. Yes it's receive only for now.
> I have a early picture, this may help.
> <https://www.dropbox.com/s/g0ax29qgnka9bca/DMRGateway.pdf>
> <https://www.dropbox.com/s/g0ax29qgnka9bca/DMRGateway.pdf>
>
> 73, Steve N4IRS
>
> On 12/1/2015 9:59 AM, Robert Newberry wrote:
>
> I got an XPR8300 that I'm going to put on dummy loads. I want to start
> testing with this. So other than the DV3000 that plugs into the RPI2. Is
> there anything else I need to start experimenting with DMRlink and
> DMRgateway?
>
> I have working analog nodes on allstar. I also have access to a XPR8400
> that I can borrow too.
>
> I think as the project exist it's RX only, eventually it will work both
> ways right?
>
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812, 42086
>
>
>
> _______________________________________________
> Allstar-Digital mailing listAllstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20151203/3737a96a/attachment.html>