[Allstar Digital] DMRGateway Steering one way audio

Steve Zingman szingman at msgstor.com
Fri May 13 12:35:35 EDT 2016


See my posting to Robert. No it can not, at least as far as BM is 
concerned. I bet it could be a repeater ID, just not the same one.

On 5/13/2016 12:11 PM, Corey Dean wrote:
> Could that also be a repeater id  instead of a user id?
>
> Sent from my iPhone
>
> On May 13, 2016, at 11:09 AM, Steve Zingman <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>> wrote:
>
>> No,
>> All analog traffic through the gateway will look like it's coming 
>> from you. ASL ---> DMR
>>
>> On 5/13/2016 11:08 AM, Robert Newberry wrote:
>>> OK Steve, thank you. This will be an excellent addition to my 
>>> network. Is there problem with me using 3123001 for gatewayDmrId?
>>>
>>> On Fri, May 13, 2016 at 10:57 AM, Steve Zingman 
>>> <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>>
>>>     You might want to change LOG_LEVEL to  INFO or WARNING to get
>>>     some information into the log. at least when debugging.
>>>
>>>     On 5/13/2016 10:49 AM, Robert Newberry wrote:
>>>>     [LOGGER]
>>>>     LOG_FILE: /var/log/dmrlink/ambe_audio.log
>>>>     LOG_HANDLERS: file
>>>>     LOG_LEVEL: CRITICAL
>>>>     LOG_NAME: DMRlink
>>>>
>>>>     I put 3123001 unber ambe_audio.cfg
>>>>
>>>>
>>>>     [ME_SW]
>>>>     gatewayDmrId = 3123001
>>>>     tgFilter = 3123
>>>>     txTg = 3123
>>>>     txTs = 2
>>>>
>>>>     On Fri, May 13, 2016 at 10:43 AM, Steve Zingman
>>>>     <szingman at msgstor.com> wrote:
>>>>
>>>>         Show me the [LOGGER] section in
>>>>         /opt/dmrlink/ambe_audio/dmrlink.cfg
>>>>         Where did you put 3123001?
>>>>
>>>>
>>>>         On 5/13/2016 10:39 AM, Robert Newberry wrote:
>>>>>         Steve, I got it working. I ended up using my ID 3123001. I
>>>>>         just got done testing on BM and talking to someone on
>>>>>         K0USY. On the last heard it shows up as me (N1XBM) and the
>>>>>         source my repeater.
>>>>>
>>>>>         I checked /var/log/dmrlink/ambe_audio.log and its blank?
>>>>>
>>>>>         On Fri, May 13, 2016 at 9:20 AM, Steve Zingman
>>>>>         <szingman at msgstor.com> wrote:
>>>>>
>>>>>             Post /var/log/dmrlink/ambe_audio.log after you issue
>>>>>             the section command
>>>>>
>>>>>             On 5/13/2016 9:12 AM, Robert Newberry wrote:
>>>>>>
>>>>>>             So I had a look at things. All files refernced are in
>>>>>>             /opt/dmrlink/ambe_audio
>>>>>>
>>>>>>             So in dmrlink.cfg I have
>>>>>>             [AMBE_PEER]
>>>>>>             ENABLED: True
>>>>>>             RADIO_ID: 312107
>>>>>>             IP: 192.168.0.203
>>>>>>             PORT: 52345
>>>>>>             ALIVE_TIMER: 5
>>>>>>             MAX_MISSED: 20
>>>>>>             PEER_OPER: True
>>>>>>             IPSC_MODE: DIGITAL
>>>>>>             TS1_LINK: True
>>>>>>             TS2_LINK: True
>>>>>>             CSBK_CALL: False
>>>>>>             RCM: True
>>>>>>             CON_APP: True
>>>>>>             XNL_CALL: False
>>>>>>             XNL_MASTER: False
>>>>>>             DATA_CALL: True
>>>>>>             VOICE_CALL: True
>>>>>>             MASTER_PEER: False
>>>>>>             AUTH_ENABLED: True
>>>>>>             AUTH_KEY: A1B2C3
>>>>>>             MASTER_IP: 192.168.0.203
>>>>>>             MASTER_PORT: 50001
>>>>>>
>>>>>>             I have in ambe_audio.cfg
>>>>>>             # DEFAULTS - General settings.  These values are
>>>>>>             #inherited in each subsequent section (defined by
>>>>>>             section value).
>>>>>>             [DEFAULTS]
>>>>>>             debug = False # Debug output for each VOICE frame
>>>>>>             outToFile = False # Write each AMBE frame to a file
>>>>>>             called ambe.bin
>>>>>>             outToUDP = True # Send each AMBE frame to the _sock
>>>>>>             object (turn on/off DMRGateway operation)
>>>>>>             gateway = 127.0.0.1 # IP address of DMRGateway app
>>>>>>             toGatewayPort = 31000 # Port DMRGateway is listening
>>>>>>             on for AMBE frames to decode
>>>>>>             remoteControlPort = 31002 # Port that ambe_audio is
>>>>>>             listening on for remote control commands
>>>>>>             fromGatewayPort = 31003 # Port to listen on for AMBE
>>>>>>             frames to transmit to all peers
>>>>>>             gatewayDmrId = 312307 # id to use when transmitting
>>>>>>             from the gateway
>>>>>>             tgFilter = 42657 # A list of TG IDs to monitor. All
>>>>>>             TGs will be passed to DMRGateway
>>>>>>             txTg = 42657    # TG to use for all frames received
>>>>>>             from DMRGateway -> IPSC
>>>>>>             txTs = 2         # Slot to use for frames received
>>>>>>             from DMRGateway -> IPSC
>>>>>>             #
>>>>>>             # The section setting defines the current section to
>>>>>>             use. By default, the ‘ENABLED’ section in dmrlink.cfg
>>>>>>             is used.
>>>>>>             # Any values in the named section override the values
>>>>>>             from the DEFAULTS section.  For example, if the BM
>>>>>>             section
>>>>>>             # has a value for gatewayDmrId it would override the
>>>>>>             value above. Only one section should be set here.  Think
>>>>>>             # of this as an easy way to switch between several
>>>>>>             different configurations with a single line.
>>>>>>             #
>>>>>>             #section = BM # Use BM section values
>>>>>>             #section = Sandbox # Use SANDBOX section values
>>>>>>
>>>>>>             [AMBE_PEER]
>>>>>>             gatewayDmrId = 312307
>>>>>>             tgFilter = 42657
>>>>>>             txTg = 42657
>>>>>>             txTs = 2
>>>>>>
>>>>>>             [ME_SW] # BrandMeister
>>>>>>             tgFilter = 3123 # A list of TG IDs to monitor. All
>>>>>>             TGs will be passed to DMRGateway
>>>>>>             txTg = 3123 # TG to use for all frames received from
>>>>>>             DMRGateway -> IPSC
>>>>>>             txTs = 2 # Slot to use for frames received from
>>>>>>             DMRGateway -> IPSC
>>>>>>
>>>>>>             So AMBE_PEER works fine, I attempted to add ME_SW
>>>>>>             which only works one way. The way I tested this is by
>>>>>>             using my dv4mini on 3123 attempting to talk to my
>>>>>>             repeater. Audio passed from my dv4mini to my
>>>>>>             repeater, but my repeater (from ASL) will not pass
>>>>>>             audio to the dv4mini. Also my bridge is setup for
>>>>>>             3123 and my local users on the repeater can use 3123
>>>>>>             for QSOs.
>>>>>>
>>>>>>             I'm guessing part of my problem is I need to add
>>>>>>             ME_SW to dmrlink.cfg. Although I'm confused about
>>>>>>             some of the settings such as using duplicate
>>>>>>             information, such as ports and IDs.
>>>>>>
>>>>>>             Thanks
>>>>>>
>>>>>>
>>>>>>             _______________________________________________
>>>>>>             Allstar-Digital mailing list
>>>>>>             Allstar-Digital at lists.keekles.org
>>>>>>             <mailto:Allstar-Digital at lists.keekles.org>
>>>>>>             http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>
>>>>>             -- 
>>>>>             "Anything is possible if you don't know what you are talking about."
>>>>>             1st Law of Logic
>>>>>
>>>>>
>>>>>             _______________________________________________
>>>>>             Allstar-Digital mailing list
>>>>>             Allstar-Digital at lists.keekles.org
>>>>>             <mailto:Allstar-Digital at lists.keekles.org>
>>>>>             http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>         -- 
>>>>>         N1XBM
>>>>>         Apparare Scientor
>>>>>         Paratus Communicare
>>>>>         Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>>>>>         www.radioguysrepeaternetwork.com
>>>>>         <http://www.radioguysrepeaternetwork.com>
>>>>>
>>>>>
>>>>>         _______________________________________________
>>>>>         Allstar-Digital mailing list
>>>>>         Allstar-Digital at lists.keekles.org
>>>>>         <mailto:Allstar-Digital at lists.keekles.org>
>>>>>         http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>
>>>>         -- 
>>>>         "Anything is possible if you don't know what you are talking about."
>>>>         1st Law of Logic
>>>>
>>>>
>>>>         _______________________________________________
>>>>         Allstar-Digital mailing list
>>>>         Allstar-Digital at lists.keekles.org
>>>>         <mailto:Allstar-Digital at lists.keekles.org>
>>>>         http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>
>>>>
>>>>
>>>>
>>>>     -- 
>>>>     N1XBM
>>>>     Apparare Scientor
>>>>     Paratus Communicare
>>>>     Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>>>>     www.radioguysrepeaternetwork.com
>>>>     <http://www.radioguysrepeaternetwork.com>
>>>>
>>>>
>>>>     _______________________________________________
>>>>     Allstar-Digital mailing list
>>>>     Allstar-Digital at lists.keekles.org
>>>>     <mailto:Allstar-Digital at lists.keekles.org>
>>>>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>     -- 
>>>     "Anything is possible if you don't know what you are talking about."
>>>     1st Law of Logic
>>>
>>>
>>>     _______________________________________________
>>>     Allstar-Digital mailing list
>>>     Allstar-Digital at lists.keekles.org
>>>     <mailto:Allstar-Digital at lists.keekles.org>
>>>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>
>>>
>>>
>>> -- 
>>> N1XBM
>>> Apparare Scientor
>>> Paratus Communicare
>>> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>>> www.radioguysrepeaternetwork.com 
>>> <http://www.radioguysrepeaternetwork.com>
>>>
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>> -- 
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org 
>> <mailto:Allstar-Digital at lists.keekles.org>
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160513/079f1bfb/attachment.html>


More information about the Allstar-Digital mailing list