[Allstar Digital] New MMDVM Audio board to debut. INADVM

[Matthew Pitts]

Sounds interesting. Will there be more information on it closer to release?

Matthew Pitts
N8OHU 

On April 6, 2017 11:27:14 AM EDT, Steve Zingman <szingman at msgstor.com> wrote:
>Due to the nature of the list, I think this is a appropriate place to 
>make a advanced product announcement.
>
>Kevin W3KKC, Mike N4IRR and I have been working on a line of MMDVM
>audio 
>boards called INADVM. The product is produced and shipped from the US. 
>
>The first version of the board is for the Arduino Due. It uses 
>multi-turn pots for receive and transmit audio. The radio connector is
>a 
>DB-9. A 12 MHz TCXO is included. On the board are LEDs for Power, PTT 
>and Data detect. Now or the fun part. The design is through hole (not 
>surface mount) except for the the voltage regulator and the TCXO. Those
>
>2 parts will be pre-mounted the rest of the board will be a kit. You 
>will receive the PC board with the regulator and TCXO mounted and all 
>the parts needed, schematic and board layout. All ready to assemble. No
>
>surface mounted parts to solder. Sockets for the ICs. There will be a 
>Assembled and Tested version also.
>
>Pricing:
>$35 for the kit plus shipping.
>$50 A&T plus shipping.
>
>The official introduction will be at the Dayton Hamfest. If possible We
>
>will have kits available before that.
>Sales will be through <http://www.masterscommunications.com/>
>
>
>-- 
>"Real programmers us vi, that's why I use nano"
>_______________________________________________
>Allstar-Digital mailing list
>Allstar-Digital at lists.keekles.org
>http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170406/7c7ca489/attachment.html>