[Allstar Digital] New MMDVM Audio board to debut. INADVM

[Steve Zingman]

Matthew,
As soon as the board layout and schematic are ready to publish they will 
be put up on the site.
Just after I posted the announcement my "editor" had a few corrections 
for me. So...

Kevin W3KKC, Mike N4IRR and I have been working on a line of MMDVM audio 
boards called INADVM. The product is produced and shipped from the US.  
The first version of the board is for the Arduino Due. It uses 
multi-turn pots for receive and transmit audio. The radio connector is a 
DB-9. A 12 MHz TCXO is included. On the board are LEDs for Power, PTT 
and Data detect. Now for the fun part. The design is through hole (not 
surface mount) except for the the voltage regulator and the TCXO. Those 
2 parts will be pre-mounted. The rest of the board will be a kit. You 
will receive the PC board with the regulator and TCXO mounted and all 
the parts needed. All ready to assemble. No surface mounted parts to 
solder. Sockets for the ICs. The schematic and board layout will be 
posted on the web site. There will be a Assembled and Tested version also.

Pricing:
$35 for the kit plus shipping.
$50 A&T plus shipping.

The official introduction will be at the Dayton Hamvention. If possible 
we will have kits available before that.
Sales will be through <http://www.masterscommunications.com/>


On 4/6/2017 9:54 PM, Matthew Pitts wrote:
> Sounds interesting. Will there be more information on it closer to 
> release?
>
> Matthew Pitts
> N8OHU