[Allstar Digital] DMRGateway testing

[Corey Dean]

If the admin of that master needs help configuring smartptt have him contact me directly.

Sent from my iPhone

> On Apr 12, 2017, at 11:33 PM, Richard Aubin <ve2dje at gmail.com> wrote:
> 
> I am not very hot in Brandmeister opération and  configuration. ..
> My  DMRlink can log on server 3108.on port 55001.
> The Last Heard windows shows every transmission I make on TG 3027.
> Every transmission from DMRlink triggers the ptt on my repeater on tg3027. But ..... No audio except a low level hish ....
> Is there something more that needs to be done on the server.?????
> I asking because I don't have a clue.
> I contacter Ve2vb Who is looking after  BM  3021 for info  abt their SmartPtt
> port. Waiting for his answer....
> .
> Thanks for your help.....
> 
> Richard
> 
> Le 12 avr. 2017 6:14 PM, "Corey Dean" <n3fe at repeater.net> a écrit :
>> Have you been setup on the server for smart Ptt?
>> 
>> Corey n3fe 
>> 
>> Sent from my iPhone
>> 
>>> On Apr 12, 2017, at 5:35 PM, <ve2dje at gmail.com> <ve2dje at gmail.com> wrote:
>>> 
>>> Hi to everyone .
>>> 
>>> 
>>> My  DMR Gateway  software suite is installed and all the testing in  the procedure are OK..
>>> 
>>>  
>>> 
>>> I am connecting to  Brandmeister 3108  port 55001  TG 3027 .
>>> 
>>>  
>>> 
>>> All response are OK .
>>> 
>>>  
>>> 
>>> The Brandmeister site shows my  DMRlink on the Last Heard window as a  Smart PTT Bridge
>>> 
>>>  
>>> 
>>> My DMRGAteway  windows shows  the connection to 127.0.0.1 port 31000 and to my
>>> 
>>> AST  USRP 34001
>>> 
>>>  
>>> 
>>> When I do  PTT  and test audio from  Iaxrpt connected  to my node .
>>> 
>>>  
>>> 
>>> The  RED  and Green leds on th Thumbsb are flashing. LH list on the server is updated .
>>> 
>>> My DMRGatewy windows shows   “Connected ( PTT asserted)” and  “Disconnected  ( PTT off)” when released
>>> 
>>> My ambe_audio windows  shows  `” INFO Transmit from gateway to TG3027:” then  “INFO Transmit complete “ on  PTT release
>>> 
>>>  
>>> 
>>> My test   MMDVM repeater opened on  TG 3027  receives a PTT  from network.
>>> 
>>>  
>>> 
>>> BUT  No audio ( only faint high frequency buzz )
>>> 
>>>  
>>> 
>>> No activity on Hoseline  even if Last Heard is being updated.....
>>> 
>>>  
>>> 
>>> Any hints as how to test the ThumbDV output ???
>>> 
>>>  
>>> 
>>> Have been experimenting  with the outputAudioDevice in DMRGateway.ini without success.....
>>> 
>>>  
>>> 
>>> Deffective ThumbDV ?????? . How can I make shure ????
>>> 
>>>  
>>> 
>>> Also I am hearing some audio out on AST node that is not coming from TG3027 ??????
>>> 
>>>  
>>> 
>>> My entry in  ambe_audio.cfg is  TGfilter =  3027,4327
>>> 
>>>  
>>> 
>>> Loaded the system twice  from scratch and ..... Same.....
>>> 
>>>  
>>> 
>>> Thanks for any advice
>>> 
>>>  
>>> 
>>> Richard VE2DJE
>>> 
>>>  
>>> 
>>> Provenance : Courrier pour Windows 10
>>> 
>>>  
>>> 
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>> 
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>> 
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170413/64f281ad/attachment.html>