[Allstar Digital] DMRGateway testing

[Mike Zingman]

Are you sure iaxrpt is sending good audio into the allstar network?  Did
you hear it on another mode?

On Thu, Apr 13, 2017 at 6:21 AM Corey Dean <n3fe at repeater.net> wrote:

> If the admin of that master needs help configuring smartptt have him
> contact me directly.
>
> Sent from my iPhone
>
> On Apr 12, 2017, at 11:33 PM, Richard Aubin <ve2dje at gmail.com> wrote:
>
> I am not very hot in Brandmeister opération and  configuration. ..
> My  DMRlink can log on server 3108.on port 55001.
> The Last Heard windows shows every transmission I make on TG 3027.
> Every transmission from DMRlink triggers the ptt on my repeater on tg3027.
> But ..... No audio except a low level hish ....
> Is there something more that needs to be done on the server.?????
> I asking because I don't have a clue.
> I contacter Ve2vb Who is looking after  BM  3021 for info  abt their
> SmartPtt
> port. Waiting for his answer....
> .
> Thanks for your help.....
>
> Richard
>
> Le 12 avr. 2017 6:14 PM, "Corey Dean" <n3fe at repeater.net> a écrit :
>
>> Have you been setup on the server for smart Ptt?
>>
>> Corey n3fe
>>
>> Sent from my iPhone
>>
>> On Apr 12, 2017, at 5:35 PM, <ve2dje at gmail.com> <ve2dje at gmail.com> wrote:
>>
>> Hi to everyone .
>>
>> My  DMR Gateway  software suite is installed and all the testing in  the
>> procedure are OK..
>>
>>
>>
>> I am connecting to  Brandmeister 3108  port 55001  TG 3027 .
>>
>>
>>
>> All response are OK .
>>
>>
>>
>> The Brandmeister site shows my  DMRlink on the Last Heard window as a
>> Smart PTT Bridge
>>
>>
>>
>> My DMRGAteway  windows shows  the connection to 127.0.0.1 port 31000 and
>> to my
>>
>> AST  USRP 34001
>>
>>
>>
>> When I do  PTT  and test audio from  Iaxrpt connected  to my node .
>>
>>
>>
>> The  RED  and Green leds on th Thumbsb are flashing. LH list on the
>> server is updated .
>>
>> My DMRGatewy windows shows   “Connected ( PTT asserted)” and
>> “Disconnected  ( PTT off)” when released
>>
>> My ambe_audio windows  shows  `” INFO Transmit from gateway to TG3027:”
>> then  “INFO Transmit complete “ on  PTT release
>>
>>
>>
>> My test   MMDVM repeater opened on  TG 3027  receives a PTT  from network.
>>
>>
>>
>> BUT  No audio ( only faint high frequency buzz )
>>
>>
>>
>> No activity on Hoseline  even if Last Heard is being updated.....
>>
>>
>>
>> Any hints as how to test the ThumbDV output ???
>>
>>
>>
>> Have been experimenting  with the outputAudioDevice in DMRGateway.ini
>> without success.....
>>
>>
>>
>> Deffective ThumbDV ?????? . How can I make shure ????
>>
>>
>>
>> Also I am hearing some audio out on AST node that is not coming from
>> TG3027 ??????
>>
>>
>>
>> My entry in  ambe_audio.cfg is  TGfilter =  3027,4327
>>
>>
>>
>> Loaded the system twice  from scratch and ..... Same.....
>>
>>
>>
>> Thanks for any advice
>>
>>
>>
>> Richard VE2DJE
>>
>>
>>
>> Provenance : Courrier <https://go.microsoft.com/fwlink/?LinkId=550986>
>> pour Windows 10
>>
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170413/6bb457ac/attachment.html>