[Allstar Digital] DMRGateway testing

Fri Apr 14 05:35:13 EDT 2017

Richard,

how to  set up audio devices on  DIAL ?????   Will try on Raspbian Jessie….
DIAL_RAT_RC1 is Raspbian Jessie.

DMRGateway..ini entry for  outputAudioDevice =  /dev/null   Will a 
  suitable audio device configured in                 DMRGateway.ini 
could confirm the quality of the audio sent from AST  Chan_USRP to 
DMRGateway ????                Any clue on  how to  set up audio devices 
on  DIAL ?????   Will try on R
This is not used for the Gateway.

My mmdvm repeater is also hooked to BM3108 on port  62031 … Could there 
be any conflict  running 2  apps to a BM server from the same public IP  
????? (  2 different Rpi3 inside)
No there should not be a issue.

Is there another  TG that is known to  work properly on BM3108 with 
DMRGateway?
DMRGaateway does not care what TG you use.

Can you confirm that Hoseline is  working properly with SmartPtt apps ?????
Yes, I can confire hoseline works properly.

Is there a audio test that can be done using Windows or Linux for 
ThumbDV ( Kind of a Loopback test ???)
Not that I know of.

73, Steve N4IRS

On 04/13/2017 11:05 PM, ve2dje at gmail.com wrote:
>
> Steve : I was already using the procedure last version . reinstalled 
> and checked all twice .
>
> ThumbDV responds normally to test and  also in  DMRGateway  screen….
>
> Same result ( NO AUDIO) on DIAL_RAT_RC1  or  on Raspbian Jessie
>
> (  I figured out  my first problem  with Jessie )
>
> Corey : I will send you a copy of your email to Ben VE2VB  so  he can 
> contact you .  BM server 3021 does not  answers back to my  Peer 
> connection on port  55001  . BM 3108 does respond properly  with same 
> config….
>
> Could you  suggest  Ben  which TG I should use for testing  the 
> setup ?????
>
> Questions  to help me troubleshoot :
>
> DMRGateway..ini entry for outputAudioDevice =  /dev/null   Will a 
>  suitable audio device configured in                 DMRGateway.ini 
> could confirm the quality of the audio sent from AST  Chan_USRP to 
> DMRGateway ????                Any clue on  how to  set up audio 
> devices on  DIAL ?????   Will try on Raspbian Jessie….
>
> My mmdvm repeater is also hooked to BM3108 on port  62031 … Could 
> there be any conflict  running 2              apps to a BM server from 
> the same public IP ????? (  2 different Rpi3 inside)
>
> Is there another  TG that is known to  work properly on BM3108 with  
> DMRGateway   ??????
>
> Can you confirm that Hoseline is  working properly with SmartPtt 
> apps ?????
>
> Here is  a file of all the apps screen startup  upu to PTT release   + 
> my .ini  …
>
> Is there a audio test that can be done using Windows or Linux for 
> ThumbDV ( Kind of a Loopback test ???)
>
> Thanks
>
> Richard
>
> Provenance : Courrier <https://go.microsoft.com/fwlink/?LinkId=550986> 
> pour Windows 10
>
> *De : *Steve Zingman <mailto:szingman at msgstor.com>
> *Envoyé le :*jeudi 13 avril 2017 06:15
> *À : *Digital linking using Asterisk and app_rpt 
> <mailto:allstar-digital at lists.keekles.org>
> *Objet :*Re: [Allstar Digital] DMRGateway testing
>
> Richard,
> Take a look at 
> <https://github.com/N4IRS/DMRGateway/raw/master/Draft%20DMRGateway%20Install%20notes.odt> 
> <https://github.com/N4IRS/DMRGateway/raw/master/Draft%20DMRGateway%20Install%20notes.odt>
> Pay attention to the testing of communications with the DV3000
>
> 73, Steve N4IRS
>
> On 04/12/2017 11:33 PM, Richard Aubin wrote:
>
>     I am not very hot in Brandmeister opération and  configuration. ..
>
>     My  DMRlink can log on server 3108.on port 55001.
>
>     The Last Heard windows shows every transmission I make on TG 3027.
>
>     Every transmission from DMRlink triggers the ptt on my repeater on
>     tg3027. But ..... No audio except a low level hish ....
>
>     Is there something more that needs to be done on the server.?????
>
>     I asking because I don't have a clue.
>
>     I contacter Ve2vb Who is looking after  BM  3021 for info  abt
>     their SmartPtt
>
>     port. Waiting for his answer....
>
>     .
>
>     Thanks for your help.....
>
>     Richard
>
>     Le 12 avr. 2017 6:14 PM, "Corey Dean" <n3fe at repeater.net
>     <mailto:n3fe at repeater.net>> a écrit :
>
>         Have you been setup on the server for smart Ptt?
>
>         Corey n3fe
>
>         Sent from my iPhone
>
>
>         On Apr 12, 2017, at 5:35 PM, <ve2dje at gmail.com
>         <mailto:ve2dje at gmail.com>> <ve2dje at gmail.com
>         <mailto:ve2dje at gmail.com>> wrote:
>
>             Hi to everyone .
>
>             My  DMR Gateway  software suite is installed and all the
>             testing in  the procedure are OK..
>
>             I am connecting to Brandmeister 3108  port 55001  TG 3027 .
>
>             All response are OK .
>
>             The Brandmeister site shows my DMRlink on the Last Heard
>             window as a  Smart PTT Bridge
>
>             My DMRGAteway  windows shows the connection to 127.0.0.1
>             port 31000 and to my
>
>             AST  USRP 34001
>
>             When I do  PTT  and test audio from  Iaxrpt connected  to
>             my node .
>
>             The  RED  and Green leds on th Thumbsb are flashing. LH
>             list on the server is updated .
>
>             My DMRGatewy windows shows  “Connected ( PTT asserted)”
>             and “Disconnected  ( PTT off)” when released
>
>             My ambe_audio windows  shows `” INFO Transmit from gateway
>             to TG3027:” then  “INFO Transmit complete “ on  PTT release
>
>             My test   MMDVM repeater opened on  TG 3027  receives a
>             PTT  from network.
>
>             BUT  No audio ( only faint high frequency buzz )
>
>             No activity on Hoseline  even if Last Heard is being
>             updated.....
>
>             Any hints as how to test the ThumbDV output ???
>
>             Have been experimenting  with the outputAudioDevice in
>             DMRGateway.ini without success.....
>
>             Deffective ThumbDV ?????? . How can I make shure ????
>
>             Also I am hearing some audio out on AST node that is not
>             coming from TG3027 ??????
>
>             My entry in  ambe_audio.cfg is TGfilter =  3027,4327
>
>             Loaded the system twice  from scratch and ..... Same.....
>
>             Thanks for any advice
>
>             Richard VE2DJE
>
>             Provenance : Courrier
>             <https://go.microsoft.com/fwlink/?LinkId=550986> pour
>             Windows 10
>
>             _______________________________________________
>             Allstar-Digital mailing list
>             Allstar-Digital at lists.keekles.org
>             <mailto:Allstar-Digital at lists.keekles.org>
>             http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
>         _______________________________________________
>         Allstar-Digital mailing list
>         Allstar-Digital at lists.keekles.org
>         <mailto:Allstar-Digital at lists.keekles.org>
>         http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
>
>
>     _______________________________________________
>
>     Allstar-Digital mailing list
>
>     Allstar-Digital at lists.keekles.org
>     <mailto:Allstar-Digital at lists.keekles.org>
>
>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20170414/de682141/attachment.html>