[App_rpt] repeater ID
Stephen Rodgers
hwstar at rodgers.sdcoxmail.com
Sun Jul 27 19:09:10 UTC 2008
Don,
Why is your hang time set to 0?
FWIW: Here's my config for comparison against yours.
> [2010] ; Name of First Repeater
>
> rxchannel = Zap/1 ; Rx audio/signalling channel
> ;duplex=0 ; Duplex mode
> ;rxnotch=1065,40 ;
> controlstates=controlstates ; system control state list
> scheduler=schedule; ; scheduler entries
> functions=functions ; Repeater Function Table
> phone_functions=functions ; Repeater Function Table
> link_functions=link-functions ; Link Function Table
> telemetry=telemetry ; Telemetry descriptions
> startup_macro=*9532011*9532000*89 ; Startup macro
> wait_times=wait-times ; Wait times
> ;archivedir = /var/lib/asterisk/monitor ; directory where recordings go
> context = autopatch ; dialing context for phone
> callerid = "WA6ZFT Repeater" <619835xxxx> ; callerid for phone calls
> idrecording = /etc/asterisk/wa6zft-rpt ; id recording
> accountcode=RADIO ; account code (optional)
> hangtime=1000 ; squelch tail hang time (in ms) (option
> althangtime=4000 ; longer squelch tail
> totime=170000 ; transmit time-out time (in ms) (option
> totime=10000
> idtime=540000 ; id interval time (in ms) (optional)
> ; The default values for hangtime, time-out time, and id interval time are
> ; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms)
> ; respectively
>
> politeid=30000 ; time in milliseconds before ID timer
>
> ; expires to try and ID in the tail.
> ; (optional, default is 30000).
> idtalkover=|iwa6zft/r ; Talkover ID (optional) default is none
> unlinkedct=ct2 ; unlinked courtesy tone (optional) defa
> remotect=ct3
> ;tailmessagetime=2000
> ;tailsquashedtime=1000
> ;tailmessagelist=vm-and,vm-and,vm-and
> parrot=0 ; Parrot mode 0 = disabled, 1 = forced (
> parrottime=1000 ; Parrot audio sample time in MS
> nodenames=rpt/nodenames ; Directory with symbolic node names
> statpost_program=/bin/wget,-q,--output-document=/dev/null
> statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
Steve,
WA6ZFT
Don Russell wrote:
> [2091]
> rxchannel = radio/usb
> duplex = 2 ; (Optional) set duplex operating mode
> functions = functions ; DTMF function list
> telemetry = telemetry ; point to telemetry stanza for this node (see below)
> tonezone = us ; use US tones (default)
> context = default ; dialing context for phone
> callerid = "WX9MCS" <2091> ; Callerid for phone calls
> idrecording = wx9mcs ; id recording
> accountcode = RADIO ; account code (optional)
> funcchar = * ; function lead-in character (defaults to '*')
> endchar = # ; command mode end character (defaults to '#')
> totime = 500000 ; transmit time-out time (in ms) (optional)
> idtalkover = |iwx9mcs/r ; Talkover ID (optional) default is none
> unlinkedct = ct1 ; unlinked courtesy tone (optional) default is none
> idtime = 590000 ; id interval time (in ms) (optional)
> politeid = 20000 ; time in milliseconds before ID timer
> hangtime = 0 ; squelch tail hang time (in
>
>
> I have no ID going on at all now. if I do a *80 I do get the ID. its just not id'ing at all by itself.
> constant clean state.
>
> I'm going to have to pull it offline until I can solve this. can't find anything at all wrong in the conf.
> been going over line by line and comparing to 2090.
>
> rpt restart will clear whatever is sticking for 1 ID only.
>
>
> Don
>
>
>
>> Date: Sun, 27 Jul 2008 08:20:59 -0700
>> From: hwstar at rodgers.sdcoxmail.com
>> To: app_rpt at lists.illiana.net
>> Subject: Re: [App_rpt] repeater ID
>>
>> Don,
>>
>> That's a strange problem. Can you try the default rpt.conf to see if it
>> does the same thing? What version of app_rpt are you running?
>>
>> Steve
>> WA6ZFT
>>
>>
>> Don Russell wrote:
>>> for some reason my node 2091 is getting stuck and will not queue an ID.
>>>
>>> if I "restart now" asterisk, it will queue for ID 1 time..
>>> same with rpt reload
>>>
>>> ID happens only once then its permanently stuck in CLEAN.
>>>
>>> anyone else seen this.
>>>
>>> I compared the rpt.conf between my two nodes and they are identical - callsigns/node#.
>>>
>>>
>>>
>>> Don
>>>
>>>
>>> _________________________________________________________________
>>> Keep your kids safer online with Windows Live Family Safety.
>>> http://www.windowslive.com/family_safety/overview.html?ocid=TXT_TAGLM_WL_family_safety_072008
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> App_rpt mailing list
>>> App_rpt at lists.illiana.net
>>> http://lists.illiana.net/mailman/listinfo/app_rpt
>> _______________________________________________
>> App_rpt mailing list
>> App_rpt at lists.illiana.net
>> http://lists.illiana.net/mailman/listinfo/app_rpt
>
> _________________________________________________________________
> Use video conversation to talk face-to-face with Windows Live Messenger.
> http://www.windowslive.com/messenger/connect_your_way.html?ocid=TXT_TAGLM_WL_Refresh_messenger_video_072008
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> App_rpt mailing list
> App_rpt at lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt
More information about the App_rpt-users
mailing list