[App_rpt] Asterisk segfaults after installation

[Steve Totaro]

On Sun, Jul 27, 2008 at 4:53 PM, Tony Langdon, VK3JED
<vk3jed at vkradio.com> wrote:
> At 01:03 AM 7/28/2008, you wrote:
>
>
>>I hear you about not wanting to re-install a whole system from scratch.
>
> That's because the system is used for other purposes.
>
>>A possible solution for your problem is to use a set of source files
>>which is known to work together very well. Why not try downloading the
>>files.tar.gz source file tarball from
>>http://dl.allstarlink.org/installcd and unpack it in
>>/usr/src? After unpacking, run ./configure, make and make install in
>>the zaptel, libpri, and asterisk directories.
>
> I was originally looking for a package that would install Asterisk
> and some suitable sample configs on an existing system, sort of like
> ACID or EVB without the base Linux system, but in any case, I'm open
> to this route.  I did use the current Asterisk, Zaptel and libpri
> from the Asterisk site for my system.
>
> Will consider it as a good option to try in any case.
>
> 73 de VK3JED
> http://vkradio.com
>

http://svn.digium.com/svn/asterisk/team/jdixon/chan_usbradio-1.4/ is
up to date total Asterisk install.  chan_rptdir is .5.

Thanks,
Steve Totaro