[App_rpt-users] Addition of a second node - messed up node 1

[Ramesh Dhami (VA3UV)]

Stephen Rodgers wrote:
> Ramesh,
> 
> I don't know where the problem would be off-hand, but what I would try
> going back to a single node system, delete the tune file(s) and
> gradually add things until it either works, or you can determine the
> thing that breaks it. Do things one step at a time noting the results at
> each step. Then revert back to the prior step to see if functionallity
> is restored.
> 
> One thing that mildly concerns me is that usbradio_tune.conf should
> never, ever be copied. Tuning must be done from scratch on an addtional
> nodes as they are added.
> 
> 
<-- Hi Steve;  Thanks for your response.  I found the problem last 
night.. a broken wire off pin 48 on the CM108 (still using my very first 
prototype fob, which has been cruising with the hood off all this time).

I'll add the second node back later this evening or over the weekend - 
depends if I can get a new PC here in time to build 2424.

Cheers,

Ramesh.