[App_rpt-users] Port 4569 question - Multiple asterisk servers behind NAT ?

[Stephen Rodgers]

Neil Addis (WA5JXY) wrote:
> I searched the archives (& google) for an answer to this. I've tried
> everything I can on this end (other than replacing the router).
> Anyone else have any insight?
> 
> I have two Asterisk servers running app_rpt, each with it's own node #.
> 
> One of them I have default port forwarding 4569 to the pc ip.
> Everything works great!
> 
> The other I set up with different ip, and used port forward  (4563) to it's ip.
> I then set my iax.conf to append the non-standard port to the
> registration statement as follows;
> 
> register=Anodenum:password:4563 at register.allstarlink.org
> 
> I then checked the /var/lib/asterisk/rpt_extnodes to see if my
> non-standard port is listed, but even after 24 hours it still shows
> 4569.
> 
> I tried bindport=4563 to no avail.
> I also tried bindaddr=0.0.0.0:4563
> I also tried bindaddr=192.168.1.106:4563
> 
> Is it a manual thing the allstarlink sysops have to do?
> 
> Is it possible to have multiple asterisk pc's behind a single  WAN ip
> - with port forwarding?
> 
> Thanks!
> Neil
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
> 
In the currently used registration system it probably needs to be specially set up by a node assigner. Please send me
your node off-list and I will check.

Steve
WA6ZFT