[App_rpt-users] Dropping tail after ID

[Chuck Henderson]

I would also like to not encode PL during ID and hang time, when there
is no repeater input signal, but have not yet found a way to do it.
Chuck


On Fri, Nov 12, 2010 at 11:38 AM, Tony KT9AC <kt9ac at ameritech.net> wrote:
> Happy Friday,
>  Wondering how to properly configure rpt.conf to drop the transmitter
> after right after an ID is sent, with no input activity (local or
> remote). Right now it keys up, sends CT, drops. Keys back up, sends ID
> and waits about 4 seconds before dropping. Tail message timers are
> commented out (but not set to zero).
>
>  It's a new install so I might have something not "standard", but felt
> I would ask here for examples.
>
>  Also, I've combed through the archives, but is there a way to not
> encode PL during an ID if all the inputs are quiet? Maybe the Event
> Management Subsystem might be helpful, so we'll see.
>
> Thanks,
> Tony
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>