[App_rpt-users] Two Radios, one URI...

[Stephen Rodgers]

On 11/25/2010 07:29 AM, Peter Elke wrote:
> Hi All,
> 
>  
> 
> After surveying all of the repeater sites, two of them are not good
> locations for direct internet access.  The WISP is too slow or has way
> too much jitter.
> 
>  
> 
> As a plan B will be attempting a 420mhz full duplex backhaul link to an
> IP connected node.
> 
>  
> 
> On those "bad" sites we will be using app_rpt in a standalone mode as a
> local repeater controller.  
> 
>  
> 
> Here is my cost saving question...  Using one URI is there a way to use
> the right channel for node A (main repeater) and the left channel for
> node B (backhaul 420 link)?   I can use a parallel port as needed for
> I/O if that is an issue...
> 
>  
> 
> Pete
> 
> 
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users

That would have been a good idea except for one thing: There's only one microphone channel input on the CM108 chip, so
it's not possible to run two radios from one URI.

Steve
WA6ZFT