[App_rpt-users] MDC-1200?

[James Nessen]

Anyone using MDC-1200 on their node?   I just programmed up my HT1250 and
gave it a radio ID of 8000, then setup the corresponding mdcmacro entries:

[mdcmacro]
I8000=*70
S*-2=*70
S*-1=*81

I key up to test, and it seems to work as expected on the first run:

Got MDC-1200 (single-length) packet on node 2142:
op: 01, arg: 00, UnitID: 8000
Got MDC-1200 data I8000 from local system (2142)
MDCMacro for I8000 doing *70 on node 2142
[Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:2815 usbradio_read:
rxcarrierdetect = 0, chan Radio/usb
[Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:2894 usbradio_read:
o->rxkeyed = 0, chan Radio/usb
chan_usbradio ACRK  dev=usb  code=(null) TX ON
[Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:2688 usbradio_read: txPttIn
= 1, chan Radio/usb
[Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:2705 usbradio_read:
txPttOut = 1, chan Radio/usb
[Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:3011 usbradio_read: dev=usb
got b.txCtcssReady 0.0
    -- <Zap/pseudo-1716568020> Playing 'rpt/node' (language 'en')
    -- <Zap/pseudo-1716568020> Playing 'digits/2' (language 'en')
    -- <Zap/pseudo-1716568020> Playing 'digits/1' (language 'en')
    -- <Zap/pseudo-1716568020> Playing 'digits/4' (language 'en')
    -- <Zap/pseudo-1716568020> Playing 'digits/2' (language 'en')
    -- <Zap/pseudo-1716568020> Playing 'rpt/repeat_only' (language 'en')
    -- Hungup 'Zap/pseudo-1716568020'
chan_usbradio ACRUK  dev=usb TX OFF >>
[Apr 23 21:49:51] NOTICE[21906]: chan_usbradio.c:2694 usbradio_read: txPttIn
= 0, chan Radio/usb
    -- Hungup 'Zap/pseudo-171990874'
[Apr 23 21:49:51] NOTICE[21906]: chan_usbradio.c:2705 usbradio_read:
txPttOut = 0, chan Radio/usb
[Apr 23 21:49:51] NOTICE[21906]: chan_usbradio.c:3011 usbradio_read: dev=usb
got b.txCtcssReady

I then key up again and it seems to decode the packet, but doesn't touch the
macro again:

[Apr 23 21:50:02] NOTICE[21906]: chan_usbradio.c:2815 usbradio_read:
rxcarrierdetect = 1, chan Radio/usb
[Apr 23 21:50:02] NOTICE[21906]: chan_usbradio.c:2886 usbradio_read:
o->rxkeyed = 1, chan Radio/usb
Got MDC-1200 (single-length) packet on node 2142:
op: 01, arg: 00, UnitID: 8000
Got MDC-1200 data I8000 from local system (2142)
[Apr 23 21:50:03] NOTICE[21906]: chan_usbradio.c:2815 usbradio_read:
rxcarrierdetect = 0, chan Radio/usb
[Apr 23 21:50:03] NOTICE[21906]: chan_usbradio.c:2894 usbradio_read:
o->rxkeyed = 0, chan Radio/usb
intrepid*CLI>

I am also attempting to work on the MDC-1200 status stuff and set the
entries above, the node sees the traffic, but doesn't actually do anything
with it.  What am i missing?

Thanks!

Jim, K6JWN
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110423/924bb75c/attachment.html>