[App_rpt-users] MDC-1200?

[Tony KT9AC]

Jim,
I'm using MDC-1200 for macro switching with almost 100% accuracy, 
depending on what radio I'm using. I haven't done anything with the 
status codes yet, but wonder if your left-hand side pattern isn't matching.

Once a macro is executed it doesn't "replay" unless you switch off of 
it, then back on.

Tony


On 04/24/2011 12:07 AM, James Nessen wrote:
> Anyone using MDC-1200 on their node?   I just programmed up my HT1250 
> and gave it a radio ID of 8000, then setup the corresponding mdcmacro 
> entries:
>
> [mdcmacro]
> I8000=*70
> S*-2=*70
> S*-1=*81
>
> I key up to test, and it seems to work as expected on the first run:
>
> Got MDC-1200 (single-length) packet on node 2142:
> op: 01, arg: 00, UnitID: 8000
> Got MDC-1200 data I8000 from local system (2142)
> MDCMacro for I8000 doing *70 on node 2142
> [Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:2815 usbradio_read: 
> rxcarrierdetect = 0, chan Radio/usb
> [Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:2894 usbradio_read: 
> o->rxkeyed = 0, chan Radio/usb
> chan_usbradio ACRK  dev=usb  code=(null) TX ON
> [Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:2688 usbradio_read: 
> txPttIn = 1, chan Radio/usb
> [Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:2705 usbradio_read: 
> txPttOut = 1, chan Radio/usb
> [Apr 23 21:49:44] NOTICE[21906]: chan_usbradio.c:3011 usbradio_read: 
> dev=usb got b.txCtcssReady 0.0
>     -- <Zap/pseudo-1716568020> Playing 'rpt/node' (language 'en')
>     -- <Zap/pseudo-1716568020> Playing 'digits/2' (language 'en')
>     -- <Zap/pseudo-1716568020> Playing 'digits/1' (language 'en')
>     -- <Zap/pseudo-1716568020> Playing 'digits/4' (language 'en')
>     -- <Zap/pseudo-1716568020> Playing 'digits/2' (language 'en')
>     -- <Zap/pseudo-1716568020> Playing 'rpt/repeat_only' (language 'en')
>     -- Hungup 'Zap/pseudo-1716568020'
> chan_usbradio ACRUK  dev=usb TX OFF >>
> [Apr 23 21:49:51] NOTICE[21906]: chan_usbradio.c:2694 usbradio_read: 
> txPttIn = 0, chan Radio/usb
>     -- Hungup 'Zap/pseudo-171990874'
> [Apr 23 21:49:51] NOTICE[21906]: chan_usbradio.c:2705 usbradio_read: 
> txPttOut = 0, chan Radio/usb
> [Apr 23 21:49:51] NOTICE[21906]: chan_usbradio.c:3011 usbradio_read: 
> dev=usb got b.txCtcssReady
>
> I then key up again and it seems to decode the packet, but doesn't 
> touch the macro again:
>
> [Apr 23 21:50:02] NOTICE[21906]: chan_usbradio.c:2815 usbradio_read: 
> rxcarrierdetect = 1, chan Radio/usb
> [Apr 23 21:50:02] NOTICE[21906]: chan_usbradio.c:2886 usbradio_read: 
> o->rxkeyed = 1, chan Radio/usb
> Got MDC-1200 (single-length) packet on node 2142:
> op: 01, arg: 00, UnitID: 8000
> Got MDC-1200 data I8000 from local system (2142)
> [Apr 23 21:50:03] NOTICE[21906]: chan_usbradio.c:2815 usbradio_read: 
> rxcarrierdetect = 0, chan Radio/usb
> [Apr 23 21:50:03] NOTICE[21906]: chan_usbradio.c:2894 usbradio_read: 
> o->rxkeyed = 0, chan Radio/usb
> intrepid*CLI>
>
> I am also attempting to work on the MDC-1200 status stuff and set the 
> entries above, the node sees the traffic, but doesn't actually do 
> anything with it.  What am i missing?
>
> Thanks!
>
> Jim, K6JWN
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110424/ceeeaf30/attachment.html>