[App_rpt-users] Remote Command Mode with Iaxrpt

[Jim Duuuude]

you are correct. IAXRPT allows you to select what node you are "sending DTMF digits"
to in the node number (account) window (the same one you use to select which node 
to connect to).

JIM WB6NIL

> From: dpowellwilliams at shaw.ca
> To: app_rpt-users at ohnosec.org
> Date: Sun, 7 Aug 2011 12:38:01 -0700
> Subject: [App_rpt-users] Remote Command Mode with Iaxrpt
> 
> I have noticed that I cannot use Iaxrpt to send remote commands to a linked
> node using the *4 <node_number> syntax.
> 
> Remote commands entered via DTMF or the console (rpt fun <nodename>
> <command>) work fine.  
> 
> Commands to the target node via a direct Iaxrpt connection also work.
> 
> However, if the target node is a remote base, only one connection is
> possible, so remote commands are necessary to make changes when the remote
> base node is connected to a standard node.
> 
> My rpt.conf file does include the necessary settings for link_functions.
> 
> I have asked Steve H about this but he is too busy to look at it for the
> moment.
> 
> Anybody have any experience with using Iaxrpt for remote commands?
> 
> 73,
> 
> Dave
> VE7MQ.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110808/8cdb4a2a/attachment.html>