[App_rpt-users] Motor boating

[Lu Vencl]

I tried the URIx and same issue occurred, so I don't think it is really an
issue with the URI

Not sure what the issue is, but I am going to try the XIPAR package just to
see if anything changes as they run on Fedora. I'll report back, likely
after the hurricane passes this weekend as I will be very busy.

This only happens on any one of my 8 PC's that contain an ASUS motherboard.
I have gone to much older and slower machines (even down to 400 Mhz) and it
works just find on them. Go figure.

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Mike Ping
Sent: Sunday, August 21, 2011 10:03 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Motor boating

 

Anybody come up with a solution to the motorboating problem?  I was
following the posts last month with interest but I don't think there was a
solution to the problem.  I had this problem a few months ago using the URI
(Version 1) on an HP DL320 (USB 2) server and figured it was a computer
issue so I did a fresh install on a HP ZE4101 (USB 1) laptop that is atleast
8 years old.  Only the URI is the common hardware piece.  It was suggested
yesterday perhaps the URI is the culprit but it seems to function otherwise
and with several reports of others having this same problem I dont think I
would blame the URI.  

 

are only people using URIs having this problem?  are people using fobs
experincing this?

 

Any ideas?

 

Mike - N3KPU

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110822/15e60dc6/attachment.html>