[App_rpt-users] another question: receive level from connected nodes

[Jim Duuuude]

With the node-generated test tone, you are supposed to set
the levels to produce 3KHz deviation (not including CTCSS).

JIM


> Date: Mon, 5 Dec 2011 13:10:51 -0500
> From: bdboyle at bdboyle.com
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] another question: receive level from connected nodes
> 
> Been digging through the archives...and haven't found an answer to this, 
> so I thought I'd throw it out to discussion...
> 
> I have 4 nodes connected up to a local hub.  All the levels are set 
> properly (own an oldish service monitor, so...can see the modulation 
> levels of the ctcss and voice nicely.  Local wideband nodes are set for 
> 3.2K w/650 hz ctcss (except for the narrowband 900, which totals out 
> around 2.7k.
> 
> Now...when the audio comes in from the net I'm connected to, 
> however...the modulation is a lot louder; peaking up to 5K.  (my node is 
> connected to another hub node, so, in essence, we have 2 back to back 
> hubs, one taking care of central NJ, mine dealing with eastern PA.)
> 
> Just wondering...how to set the level so the inbound audio from the 
> networked nodes is a little less...um...'sprightly'.
> 
> Would this be handled in my usbradio_tune_usbhubnode.conf thru 
> radio-tune-menu or...somewhere else?
> 
> 
> -- 
> Bryan
> In this world, you must be oh so smart or oh so pleasant.
> Well, for years I was smart. I recommend pleasant.
> You may quote me.
> 
> Sent from my MacBook Pro.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111205/f1c195ed/attachment.html>