[App_rpt-users] My first node attempt today

[Lu Vencl]

Perfect, just what I was looking for. 

Adding to my living allstarlink notes for newbies..

Thanks!

 

From: Scott Weis [mailto:kb2ear at kb2ear.net] 
Sent: Friday, July 22, 2011 9:57 AM
To: 'Lu Vencl'; 'David KE6UPI'
Cc: app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] My first node attempt today

 

"radio active usbxxxxx" where xxxxx is your node number.

"radio set debug"

 

Should you everything about the RF side, COR detect, CTCSS detect, TX PTT,
etc.

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Lu Vencl
Sent: Friday, July 22, 2011 9:49 AM
To: 'David KE6UPI'
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] My first node attempt today

 

Hi David,

This is long fixed now.. Had an error in the USB.conf file, but what I was
looking for was some sort of feedback showing DTMF detection, for which I
now know I can see from CLI and perhaps a greater verbose value (I use 9)

What would be nice though is COR status, for which I don't think there is
any visual available that I know of.. But then again, I am using DSP now so
it really does not matter.

73, 

Lu  KA4EPS

 

 

From: shawpbx at gmail.com [mailto:shawpbx at gmail.com] On Behalf Of David KE6UPI
Sent: Friday, July 22, 2011 9:28 AM
To: Lu Vencl
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] My first node attempt today

 

Hey Lu, What command are you trying to use? I don't remember a command to
show CTCSS or DTMF. I guess the questions is what are you trying to do?

David

On Sat, Jul 9, 2011 at 7:21 AM, Lu Vencl <vencl at att.net> wrote:

Folks,

Got the first one up, but I can't seem to get any command to work (unless I
use CLI).

Is there a script or method where I can get visual screen stats that shows
CTCCS, DTMF decode etc?  Similar to IRLP's read input?

Thanks

Lu

KA4EPS


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110722/0c00e887/attachment.html>