[App_rpt-users] Rx disable command

[Tony KT9AC]

Too bad you can't just switch the input PL required during those times. 



----- Reply message -----
From: "Steve Passmore" <k6kya at hokeynet.net>
Date: Tue, Jun 14, 2011 10:59 pm
Subject: [App_rpt-users] Rx disable command
To: <app_rpt-users at ohnosec.org>

If DTMF commands were still processed I could still issue a command to turn it back on.   Many standalone repeater controllers allow this.

Basically this is a tool to combat jammers.  Currently I have to disable the repeater which gives them satisfaction to their jamming.  Since there are several repeaters linked together I would prefer to still have the traffic from the other nodes transmitted but not allow the jammer to be heard.   I realize I could use monitor mode but traffic on that port is still repeated just not on the other nodes.

Thanks, Steve

On 6/9/2011 9:34, Buddy Brannan wrote:
> So, what, do you just want it to not repeat anything? If you disable the receiver, how can you re-enable it with DTMF?
>
> To disable the repeater, in rpt.conf I have:
> 901092=cop,3
>
> And to enable,
> 901091=cop,2
>
> So entering *901092 on the keypad turns off the repeater, which won't repeat anything really until it receives *901091 to re-enable it.
>
> Or do I completely not understand what you want?
> --
> Buddy Brannan, KB5ELV - Erie, PA
> Phone: (814) 860-3194 or 888-75-BUDDY
>
>
>
> On Jun 9, 2011, at 12:27 AM, Steve Passmore wrote:
>
>> Is there any way to disable a repeater's receiver via a DTMF command and/or via the command line?    I've looked through the options and short of using one of the gpio output pins to disable the receiver in the repeater I can't see a way.   Ideally DTMF control could still be maintained via the receiver.
>>
>> Thanks,  Steve
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110615/972a3f38/attachment.html>