[App_rpt-users] node list lookups

[George Csahanin]

Yup, already did that, but it just seems like the all-star node downloaded list is checked first.

Like I said, not the end of the world, but would give me an option I could really use. 

George Csahanin
Sent from my iPad

On Nov 20, 2011, at 7:46 PM, Tim Sawyer <tim.sawyer at me.com> wrote:

> For private networks you have to specify the all other node(s) in each node's node stanza. ie 
> 
> 2360 ip 111 has
> [nodes]
> 2360 = radio at 127.0.0.1/2360,NONE
> 1998 = radio at 192.168.1.132/1998,NONE
> 
> and 1998 ip 132 has
> [nodes]
> 1998 = radio at 127.0.0.1/1998,NONE
> 2360 = radio at 192.168.1.111/2360,NONE
> 
> 
> --
> Tim
> :wq
> 
> On Nov 20, 2011, at 4:59 PM, George Csahanin wrote:
> 
>> I have two nodes running here at my house, one is 2360, IP 65.68.232.25, one is an unlisted one, so to speak (1998) on 192.168.0.132
>> 
>> This gets complicated. 65.68.232.25 nats thru the router to 192.168.1.111, the box REAL address. I need to make a connection from 1998 on an inside address to 2360, but the directory address is 65.68.232.25. The inside addresses cannot see that address. Something with the router...and no one has been able to figure it out...it just is that way. However, I put a line in rpt,conf with this line: 2360 = radio at 192.168.1.111/2360,NONE, this under [nodes]
>> 
>> But when I go to connect from 1998 to 2360 it still won't, leading me to think that app_rpt, etc forst looks at the downloaded list and then at [nodes]. Is this correct? If so I'll just have to live with it. But if there is a way to make it look at [nodes] first, then the downloaded directory...etc. Kinda like hosts, bind in /etc/host.conf
>> 
>> Any thoughts on this?
>> 
>> Thanks everyone.
>> 
>> GeorgeC
>> Node 2360/2428
>> 
>> 
>> 
>> George J Csahanin
>> W2DB
>> Cedar Park, TX 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users